Misalignment estimation and compensation for robotic assembly with uncertainty
Published online by Cambridge University Press: 27 April 2005
Abstract
The complexity and uncertainty of the cross-sectional shape of the parts to be mated is one of the main reasons that misalignment between them occurs in assembly processes. Misalignment cannot only give rise to assembly failure but also cause damage to the parts or a robot due to large contact force. Therefore, misalignment sensing and compensation is essential for successful assembly operation. In this paper, we propose a novel misalignment estimation and compensation method which does not need any advance information on the cross-sectional shapes of the mating parts. This method utilizes a $\varphi-r$ transformation and an M-estimation pattern matching technique with misalignment images of a peg and a hole taken by an omni-directional visual sensing system during assembly. At every sampling instant during assembly action, it furnishes information on the relative position and orientation between the mating parts, and thus helps to estimate and compensate any possible misalignment between them. Also, a series of experiments are performed with a couple of peg-in-hole tasks, and the results are discussed. The experimental results show that the proposed method is effective for misalignment compensation in robotic assembly even though there is no prior information on part geometry and the images are very noisy.
Keywords
- Type
- Research Article
- Information
- Copyright
- © 2005 Cambridge University Press
- 9
- Cited by