Crossref Citations
This article has been cited by the following publications. This list is generated based on data provided by
Crossref.
Oblak, S.
Skrjanc, I.
and
Blazic, S.
2005.
On applying interval fuzzy model to fault detection and isolation for nonlinear input-output systems with uncertain parameters.
p.
465.
Yildirim, ?ahin
2005.
A Proposed Hybrid Recurrent Neural Control System for Two Co-operating Robots.
Journal of Intelligent and Robotic Systems,
Vol. 42,
Issue. 1,
p.
95.
Vemuri, Arun
and
Subbarao, Kamesh
2006.
Fault Isolation Using Extrinsic Curvature of Nonlinear Fault Models.
p.
1.
Oblak, Simon
Škrjanc, Igor
and
Blažič, Sašo
2007.
Fault detection for nonlinear systems with uncertain parameters based on the interval fuzzy model.
Engineering Applications of Artificial Intelligence,
Vol. 20,
Issue. 4,
p.
503.
Subbarao, Kamesh
and
Vemuri, Arun
2007.
Fault Isolation Using Extrinsic Curvature For Multi-Input-Multi-Output Systems With Nonlinear Fault Models.
p.
3246.
Tinós, Renato
Terra, Marco Henrique
and
Bergerman, Marcel
2007.
A fault tolerance framework for cooperative robotic manipulators.
Control Engineering Practice,
Vol. 15,
Issue. 5,
p.
615.
Tinós, Renato
and
Terra, Marco Henrique
2008.
A fault detection and isolation system for cooperative manipulators.
Sba: Controle & Automação Sociedade Brasileira de Automatica,
Vol. 19,
Issue. 4,
p.
406.
Zhang, Bin
Yan, Jun
and
Tian, Cheng
2008.
Study on Fault Diagnosis System of Diesel Engine Fuel Injection System Based on BP Neural Network.
p.
108.
Yuchuan Wu
Qinli Lan
and
Yaqin Sun
2009.
Application of BP neural network fault diagnosis in solar photovoltaic system.
p.
2581.
Caccavale, F.
Cilibrizzi, P.
Pierri, F.
and
Villani, L.
2009.
Actuators fault diagnosis for robot manipulators with uncertain model.
Control Engineering Practice,
Vol. 17,
Issue. 1,
p.
146.
Subbarao, Kamesh
and
Vemuri, Arun T.
2009.
Extrinsic curvature-based fault isolation for multi-input—multi-output systems with non-linear fault models.
Transactions of the Institute of Measurement and Control,
Vol. 31,
Issue. 3-4,
p.
259.
Paviglianiti, Gaetano
Pierri, Francesco
Caccavale, Fabrizio
and
Mattei, Massimiliano
2010.
Robust fault detection and isolation for proprioceptive sensors of robot manipulators.
Mechatronics,
Vol. 20,
Issue. 1,
p.
162.
Bittencourt, André Carvalho
Wernholt, E
Sander-Tavallaey, S
and
Brogårdh, Torgny
2010.
An extended friction model to capture load and temperature effects in robot joints.
p.
6161.
Caccavale, Fabrizio
Marino, Alessandro
and
Pierri, Francesco
2010.
Sensor fault diagnosis for manipulators performing interaction tasks.
p.
2121.
Hou, Ming Liang
Liu, Yu Ran
Xing, Shu Bin
and
Su, Li Yun
2011.
Study of Intelligent Diagnosis System for Photoelectric Tracking Devices Based on Multiple Knowledge Representation.
Advanced Materials Research,
Vol. 179-180,
Issue. ,
p.
602.
Bittencourt, André Carvalho
Axelsson, Patrik
Jung, Ylva
and
Brogårdh, Torgny
2011.
Modeling and Identification of Wear in a Robot Joint under Temperature Uncertainties.
IFAC Proceedings Volumes,
Vol. 44,
Issue. 1,
p.
10293.
Siqueira, Adriano A. G.
Terra, Marco H.
and
Bergerman, Marcel
2011.
Robust Control of Robots.
p.
177.
Bittencourt, André Carvalho
and
Gunnarsson, Svante
2012.
Static Friction in a Robot Joint—Modeling and Identification of Load and Temperature Effects.
Journal of Dynamic Systems, Measurement, and Control,
Vol. 134,
Issue. 5,
Bittencourt, André Carvalho
Saarinen, Kari
and
Sander-Tavallaey, Shiva
2012.
A Data-driven Method for Monitoring Systems that Operate Repetitively -Applications to Wear Monitoring in an Industrial Robot Joint1.
IFAC Proceedings Volumes,
Vol. 45,
Issue. 20,
p.
198.
Van, Mien
Kang, Hee-Jun
Suh, Young-Soo
and
Shin, Kyoo-Sik
2013.
A robust fault diagnosis and accommodation scheme for robot manipulators.
International Journal of Control, Automation and Systems,
Vol. 11,
Issue. 2,
p.
377.