2.1. Human arm movement primitives and motion pattern

In this paper, the human arm movement primitive is introduced to express the human arm motion intuitively. The arm posture of the human arm can be determined by the position (P) and orientation (O) of the hand endpoint (fingertip), and the swivel angle ( $\Phi$ ). The swivel angle $\Phi$ is defined as the rotation angle of the arm triangle $\Delta \text{SW}{{\text{E}}_{1}}$ around the virtual line SW, as shown in Fig. 1(a). The detailed meaning of each movement primitive is shown in ref. [Reference Ding and Fang18]. $\Phi$ $(t)$ , P( $t$ ), and O( $t$ ) can completely express the human arm motion, and are defined as the human arm movement primitive. The arm posture of the robot arm can also be represented by the corresponding movement primitive, as shown in Fig. 1(b).

Figure 1. Expression of the human arm and the robotic arm motion. SWE plane is the reference plane and perpendicular to the horizontal plane. $\Phi$ is swivel angle, p and O are hand position and posture, respectively. The human arm triangle $\Delta \text{SW}{{\text{E}}_{1}}$ is shown in (a). The robotic arm triangle $\Delta \text{SW}{{\text{E}}_{1}}$ is shown in (b).

These three movement primitives are also movement primitive elements that make up other movement primitives. The new movement primitive formed by these three movement primitive elements is $\Phi$ P, $\Phi$ O, PO, and $\Phi$ PO. $\Phi$ P is abbreviated of $\Phi (t)$ P $(t)$ . Other movement primitives are abbreviated according to the same rules.

So far, seven movement primitives have been proposed. The motion meanings of these assembled human arm movement primitives can be obtained by combining the motion meanings of three movement primitive elements. For instance, the motion meaning of $\Phi$ P is the combination of the motion meanings of $\Phi$ and P, that is, at time t, the arm triangle is rotating around the virtual axis, and the fingertip position also changes.

The arrangement and combination of the movement primitives expressing the motion of the human arm are defined as HAMP. For example, the primitive types of a certain motion are arranged in chronological order as follows [Reference Zhao and Wang23]:

(1) \begin{equation} \underbrace{\Phi \text{PO} \cdots \Phi \text{PO}}_{k}\underbrace{\text{PO} \cdots \text{PO}}_{m} \end{equation}

As the primitive types of the first k frames are all $\Phi$ PO, and the remaining m frame primitives are all PO. In this case, HAMP can be abbreviated to $\Phi$ PO-PO. Other HAMPs are abbreviated according to the same rules.

2.2. Generation of the human arm motion data set

The robot object handover task can be divided into two sub-tasks: pick-up and delivery. We designed experiments to let human participants fulfill the pick-up and delivery tasks and generate a human arm motion data set for extracting the human arm motion features. In the pick-up task, the experimental scene setting is the same as in ref. [Reference Ding and Fang18]. The human arm rests on the right side of the body, as shown in Fig. 2(a), and the target point position distribution is shown in Fig. 2(b). The distance between adjacent points is 10 cm, and there are 108 target points in total. At the end of the pick-up task, the tip of the right finger pointed to the marked point in Fig. 2(a). Ten participants participated in this experiment. Each target point was repeated three times. A total of 3240 experiments were completed.

Figure 2. The pick-up sub-task experimental scene and the target point distribution are shown in (a) and (b), respectively. The delivery sub-task experiment scene and the starting and target points distribution are shown in (c) and (d), respectively.

In the delivery motion, the starting position of the human arm is 10 mark points in the initial area of Fig. 2(d), and the target position of the human arm is 15 mark points in the target area. In the experiment, the participants are required to place their right hand naturally at the starting point and then move their hands to the target point at a natural speed and a more comfortable rhythm befitting daily life, as shown in Fig. 2(c). Eleven participants participated in the delivery task experiment, each participant performed 450 experiments, and a total of 4950 experiment data points were collected.

Before collecting experimental data, each participant conducted several pre-experiments to become familiar with the experimental content. During the experiment, each participant wore motion capture clothing that recognized arm motions. OptiTrack motion capture system collects the data of the human arm motion of each participant at a rate of 120 Hz.

According to the definition of HAMP, HAMP extraction algorithm is as follows. (1) Extract right arm motion data from the collected human BVH data. (2) Calculate the values of primitives $\Phi$ , P, and O in each frame of data. (3) Identify the human arm movement primitives in each frame of motion. (4) Merge adjacent and identical primitives. (5) Generate HAMPs and record the duration of each primitive.

3.1. Extracting human arm motion patterns from the human arm motion data set

HAMPs of all experimental samples in the pick-up task and the delivery task are extracted and analyzed. The analysis results show 84 and 95 HAMPs for the pick-up and the delivery tasks, respectively. The top five HAMPs in the pick-up task and the delivery task are shown in Table I. There are more HAMPs in the arm motion, and the frequency of each HAMP is lower.

Table I. The Top Five HAMPs.

As there are many types of HAMPs in the whole moving process, the frequency of each HAMP is lower, and HAMPs calculated in this way are not convenient for nuanced analysis. The study shows that the primitive P has a symmetrical bell-shaped velocity profile [Reference Flash and Hogan3]. To make HAMP more accurately applied to the robot’s human-like motion, the human arm point-to-point motion is divided into two motion phases based on the speed peak of the primitive P.

HAMP of each motion phase is extracted and statistically analyzed separately. The statistical analysis reveals 26 and 23 types of HAMPs, respectively, in the pick-up task’s first and second motion phases. There are 16 and 21 types of HAMPs in the first and second motion phases of the delivery task, respectively. Tables II and III only show the top five HAMPs of each motion phase in the two tasks. Tables II and III show that there are relatively few types of HAMPs in each phase. Some HAMPs have a higher frequency, such as $\Phi$ PO-PO in phase 2 of the pick-up task. The results indicate that dividing the whole motion into two motion phases to analyze HAMP of each motion phase is better than analyzing HAMP of the whole motion.

Table II. Pick-up: The top five HAMPs in each phase.

Table III. Delivery: The top five HAMPs in each phase.

3.2. Selecting the most representative human arm motion patterns

The human arm motion process is divided into two phases, and each motion phase’s HAMPs are analyzed separately to obtain representative HAMPs. However, there are still many types of HAMPs. It is necessary to select one or two HAMPs that can represent the motion characteristics of the human arm from among multiple HAMPs. In this section, combined with the frequency of HAMPs, the connection frequency of primitives, and the primitive types and the order, we propose a motion pattern composite constraint similarity index (MPCSI) to choose HAMPs.

a) Primitive connection type: Based on the analysis of HAMPs, there are four primitive types $\Phi$ PO, $\Phi$ P, PO, and P, in all HAMPs. The different combinations of these four primitives form different types of HAMPs. Therefore, the pairwise combination of these four primitives or a single primitive is defined as the connection type of the primitives, such as $\Phi$ PO-, $\Phi$ PO- $\Phi$ P, and P-.

According to the definition of the primitive connection type, the frequency calculation formula of the primitive connection type is

(2) \begin{equation} f_{Lj}={\sum \limits _{i\text{=}1}^{{{n}_{0}}}{({{N}_{ij}}{{\,f\!}_{mi}}})}/{\sum \limits _{i\text{=}1}^{{{n}_{0}}}{({{N}_{ci}}{{\,f\!}_{mi}}})}\; \end{equation}

where ${f}_{Lj}$ is the frequency of the $j$ -th primitive connection type, ${n}_{0}$ is the number of HAMP types, ${N}_{ij}$ is the number of the $j$ -th connection type in the $i$ -th HAMP, ${f}_{mi}$ is the number of the $i$ -th HAMPs, and ${N}_{ci}$ is the number of the primitive connection types in the $i$ -th HAMP.

b) Motion pattern composite constraint similarity index: From the definition of HAMP, it can be seen that the primitive type and the order reflect the difference of each HAMP. The smaller the degree of change of the primitive type and the order of different HAMPs, the higher the degree of similarity. Inspired by the definition of string similarity [Reference Zhang24, Reference Pesu and Zhou25], it is proposed to use HAMP similarity index to measure the degree of similarity of HAMP.

Suppose one of the two HAMPs is the original HAMP, $s$ , and the other is the target HAMP, $h$ ; $s$ is composed of $m$ primitives, and $h$ is composed of $n$ primitives. The calculation formula of the similarity index $\text{sim}(h,s)$ of the two HAMPs can be defined as

(3) \begin{equation} \text{sim}(h,s)=\frac{n+m-d(h,s)}{n+m}\, \end{equation}

where $d(h,s)$ is the number of primitive types and sequence changes in the two HAMPs. The cost of changing what once is 1. The total number of minimum changes can be calculated by the Levenshtein distance algorithm [Reference Zhang24].

HAMP similarity index considers the primitive types and the primitive order factors (internal factors) contained in HAMP. However, the influence of the frequency of HAMP and the frequency of the primitive connection type (external factors) on the choice of HAMP is not considered.

MPCSI solved the problem that HAMP similarity did not consider the influence of HAMP and the frequency of the primitive connection type on HAMP similarity. According to the above analysis, each HAMP contains one or more primitive connection types, and the frequency of each primitive connection type is different. Therefore, the frequency of the primitive connection type is introduced in HAMP similarity to reflect the influence of the primitive connection type on HAMP selection. The frequency of the primitive connection type is used to measure the cost of changing the primitive type and order. The higher the frequency of the primitive connection type, the higher the cost of changing the primitive type and order. For example, the frequency of the second phase of the delivery task primitive connection type $\Phi$ PO- $\Phi$ P is 0.5535, and the cost of changing the primitive connection type $\Phi$ PO- $\Phi$ P is 0.5535. Similarly, the higher the frequency of the target HAMP, the smaller the cost of changing the original HAMP.

Based on the above analysis and the formula of HAMP similarity index, MPCSI formula $\text{simc}(h,s)$ is computed under the compound constraint of the primitive connection type frequency and HAMP frequency:

(4) \begin{equation} \text{simc}(h,s)={(m+n-(1-{{f}_{h}})\sum \limits _{j=1}^{{{n}_{c}}}{({{a}_{j}}{{\,f\!}_{Lj}}}))}/{(m+n)}\; \end{equation}

where ${n}_{c}$ is the number of the primitive connection type. ${{a}_{j}}=1$ , when the $j$ -th primitive connection type is changed from original HAMP to target HAMP, otherwise ${{a}_{j}}=0$ . $m$ and $n$ are the number of primitives contained in the original HAMP and the target HAMP, respectively; ${f}_{h}$ is the frequency of the target HAMP.

Equation (4) is used to calculate MPCSI between HAMPs.

(5) \begin{equation} \text{Sm}=\left [ \begin{matrix} \text{simc}({{h}_{1}},{{s}_{1}})\;\;\;\; & \text{simc}({{h}_{1}},{{s}_{2}})\;\;\;\; & \cdots\;\;\;\; & \text{simc}({{h}_{1}},{{s}_{K}}) \\[5pt] \text{simc}({{h}_{2}},{{s}_{1}})\;\;\;\; & \text{simc}({{h}_{2}},{{s}_{2}})\;\;\;\; & \cdots\;\;\;\; & \text{simc}({{h}_{2}},{{s}_{K}}) \\[5pt] \vdots\;\;\;\; & \vdots\;\;\;\; & \cdots\;\;\;\; & \vdots \\[5pt] \text{simc}({{h}_{L}},{{s}_{1}})\;\;\;\; & \text{simc}({{h}_{L}},{{s}_{2}})\;\;\;\; & \cdots\;\;\;\; & \text{simc}({{h}_{L}},{{s}_{K}}) \\[5pt] \end{matrix} \right ]\ \end{equation}

where $K$ is the number of original HAMPs, and $L$ is the number of target HAMPs.

(6) \begin{equation} \overline{\text{Sm}}({{h}_{j}},s)={\sum \limits _{i=1}^{K}{\text{Sm}(\,j,i)}}/{K}\ \end{equation}

where $\overline{\text{Sm}}({{h}_{j}},s)$ is the average of MPCSI between the target HAMP, ${h}_{j}$ , and all of the original HAMPs.

The developed MPCSI is employed to select HAMP of each motion phase of the pick-up task and the delivery task. According to (6), the average value of MPCSI of HAMPs in each motion phase of the two sub-tasks is calculated, and the results are shown in Fig. 3. The figure only shows the average similarity value of the first six HAMPs of the calculation result. The higher the similarity value, the higher the degree of similarity between HAMP and other HAMPs, and the more representative the motion characteristics of the human arm.

Figure 3. MPCSI values of HAMPs in the first and second phases of the pick-up task are in (a) and (b), respectively. MPCSI values of HAMPs in the first and second phases of the delivery task are in (c) and (d), respectively. The black boxes are the most representative HAMPs.

In the pick-up task, HAMP with the highest MPCSI value in the first motion phase is $\Phi$ PO. HAMP with the highest MPCSI value in the second motion phase is $\Phi$ PO-PO. MPCSI values of other HAMPs are relatively low. In the delivery task, HAMPs with higher MPCSI values in the first motion phase are $\Phi$ PO and PO- $\Phi$ PO, HAMPs with higher MPCSI values in the second phase are $\Phi$ PO and $\Phi$ PO-PO, and MPCSI values of the two are close. MPCSI values of other HAMPs are relatively low, as shown in Fig. 3.

4.1. Analyzing the affecting factors of the movement primitive duration

The ratio of the duration of primitives $\Phi$ , P, and O to the motion’s total duration is defined as ${R}_{\Phi }$ , ${R}_{P}$ , and ${R}_{O}$ , respectively. Figure 4 shows that ${R}_{\Phi }$ , ${R}_{P}$ , and ${R}_{O}$ in the pick-up and delivery tasks are analyzed, respectively. It can be seen from the figure that in the pick-up task and delivery task, the sample number of primitive P and O, whose duration ratio to the total duration is between 90% and 100%, is close to the total sample number. It indicates that the duration of primitive P and O is close to the total duration. In the pick-up task and delivery task, the experimental samples corresponding to ${R}_{\Phi }$ showed a normal distribution, and most experimental samples ranged from 50% to 90%. It can be seen from Fig. 4(a) and (b) that the results of the pick-up task and delivery task are the same. Based on the analysis of HAMP and the duration of each primitive, it can be seen that the change of HAMP type is mainly caused by the change of the duration of primitive $\Phi$ .

Figure 4. The primitive duration to the total duration ratio statistics. The horizontal axis shows the ratio of primitive duration to the total duration. The pick-up task and delivery task are shown in (a) and (b), respectively.

The relationship between ${R}_{\Phi }$ and $\Delta \Phi$ in the pick-up and delivery tasks is analyzed, as shown in Fig. 5(a) and (b). It can be seen that ${R}_{\Phi }$ increased with the increase of the value of $\Delta \Phi$ . The relationship between ${R}_{\Phi }$ and $\Delta \Phi$ is slightly different in the pick-up task and delivery task, but the overall trend is consistent. The variation range of ${R}_{\Phi }$ is about 15% in each interval of $\Delta \Phi$ . At this point, if $\Delta \Phi$ is used to estimate ${R}_{\Phi }$ , the estimated primitive duration is inaccurate. The wide variation range of ${R}_{\Phi }$ is caused by the differences of experimental individuals, as shown in Fig. 5(c) and (d). There is a significant difference in the variation of ${R}_{\Phi }$ with the change of $\Delta \Phi$ between participant 1 and participant 2.

Figure 5. The statistical results of the relationship between ${R}_{\Phi }$ and $\Delta \Phi$ in the pick-up task and the delivery task are in (a) and (b), respectively. The relationship between ${R}_{\Phi }$ and $\Delta \Phi$ of participant 1 and participant 2 is in (c) and (d), respectively.

Based on the above analysis, it can be seen that the changing trend between ${R}_{\Phi }$ and $\Delta \Phi$ in the pick-up and the delivery task is the same. ${R}_{\Phi }$ increases with the increase of $\Delta \Phi$ . However, owing to the differences between the individuals, the value of ${R}_{\Phi }$ within each interval of $\Delta \Phi$ varies greatly.

The individual difference is mainly reflected in the different value ranges of the primitives of the different people, which lead to the different changes in the primitives of the same motion. Therefore, to reduce the influence of the individual differences on the value of primitive $\Phi$ duration and improve the accuracy of the estimation of the primitive $\Phi$ duration, a parameter ${R}_{d}$ affecting the duration of the primitive $\Phi$ is introduced. ${R}_{d}$ is defined as

(7) \begin{equation} R_{d}{=}\frac{{\Delta \Phi }/{{{\Phi }_{M}}}\;}{{\Delta P}/{{{P}_{M}}}\;}\ \end{equation}

where, $\Delta \Phi \text{=}\left |{{\Phi }_{f}}-{{\Phi }_{0}} \right |$ , ${\Phi }_{0}$ , and ${\Phi }_{f}$ are the value of primitive at the starting point and target point, respectively; ${\Phi }_{M}$ is the maximum variation range of primitive; $\Delta P\text{=}\left |{{P}_{f}}-{{P}_{0}} \right |$ , ${P}_{0}$ , and ${P}_{f}$ are the value of primitive P at the starting point and target point, respectively; and ${P}_{M}$ is the maximum variation range of primitive P.

4.2. Determinate the duration of the motion primitive $\Phi$

The duration of primitive $\Phi$ can be estimated by studying the law that ${R}_{\Phi }$ changes with $R_{d}$ in the pick-up and delivery tasks of the human arm. The variation law of ${R}_{\Phi }$ with $R_{d}$ is obtained through the statistical analysis of the experimental samples of the pick-up task and delivery task, as shown in Fig. 6(a) and (d), respectively. It can be seen from Fig. 6(a) and (d) that the variation range of ${R}_{\Phi }$ in the interval of $R_{d}$ is about 5%. Compared with Fig. 5(a) and (b), the duration ratio of primitive $\Phi$ has a smaller range, and the duration of primitive $\Phi$ obtained by $R_{d}$ is more accurate. In the pick-up and delivery tasks, the variation law of ${R}_{\Phi }$ with $R_{d}$ is similar but slightly different. In the pick-up task, when ${R_{d}}\ge 1.8$ , the value of ${R}_{\Phi }$ is stable at $(90\pm 4)$ %, as shown in Fig. 6(a). In the delivery task, when ${R_{d}}\ge 1.6$ , the value of ${R}_{\Phi }$ is stable at $(92\pm 4)$ %, as shown in Fig. 6(d). The value of ${R}_{\Phi }$ no longer changes significantly with the increase of the value of $R_{d}$ , and ${R}_{\Phi }$ gradually tended toward 100%. That is, the duration of primitive $\Phi$ is equal to the total duration of motion.

Figure 6. The relationship between ${R}_{\Phi }$ and $R_{d}$ in the whole moving process and the first and second motion phases in the pick-up task is in (a), (b), and (c), respectively. The relationship between ${R}_{\Phi }$ and $R_{d}$ in the whole moving process and the first and second motion phases in the delivery task is in (d), (e), and (f), respectively.

Figure 6(b), (c), (e), and (f), respectively, show the variation law of ${R}_{\Phi }$ with $R_{d}$ in each motion phase of the pick-up task and the delivery task. It can be seen from Fig. 6(b) that the ratio ${R}_{\Phi 1}$ of the duration of primitive $\Phi$ to the total duration in the first phase of the pick-up task is approximately equal to 1. It shows that the duration of the primitive $\Phi$ is equal to the first phase’s duration. In the second motion phase, the ratio ${R}_{\Phi 2}$ of the duration of primitive $\Phi$ to the total duration increases with the increase of $R_{d2}$ , but the maximum value of ${R}_{\Phi 2}$ is about 80%, as shown in Fig. 6(c). The maximum duration of primitive $\Phi$ is less than the duration of the second phase. The variation law of ${R}_{\Phi 2}$ with $R_{d2}$ is used to estimate the duration of primitive $\Phi$ in the second motion phase, as shown in Fig. 6(c).

In the first phase of the delivery task, when ${R_{d1}}\ge 1.8$ , the value of ${R}_{\Phi 1}$ is stable at $(95\pm 5)$ %, as shown in Fig. 6(e). It shows that the duration of the primitive $\Phi$ is equal to the first phase’s duration. When ${R_{d1}}\lt 1.8$ , the duration of primitive $\Phi$ is less than that of the first phase. The variation law of ${R}_{\Phi 1}$ with $R_{d1}$ is used to estimate the duration of primitive $\Phi$ in the first motion phase of the delivery task, as shown in Fig. 6(e).

In the second phase of the delivery task, when ${R_{d2}}\ge 1.6$ , the value of ${R}_{\Phi 2}$ is stable at $(93\pm 4)$ %, as shown in Fig. 6(f). That is, the duration of primitive $\Phi$ at each phase is close to the total duration of the second phase. When ${R_{d2}}\lt 1.6$ , the duration of primitive $\Phi$ is less than that of the second phase. The variation law of ${R}_{\Phi 2}$ with $R_{d2}$ is used to estimate the duration of primitive $\Phi$ in the second motion phase of the delivery task, as shown in Fig. 6(f).

5.1. Calculation of parameters affecting the duration of primitives

This module is used to calculate $R_{d}$ , which provides a basis for the decision-making of HAMP and determining the duration of primitive. First, the static human-like arm posture at the starting point and the target point is calculated, and the difference $\Delta \Phi$ of the primitive $\Phi$ between the starting point and the target point is determined. Then, $R_{d}$ is calculated according to (7). Finally, the motion is divided into two phases, and $R_{d1}$ and $R_{d2}$ are calculated for the first and the second phases according to the above method.

5.2. Human arm motion pattern decision module

This module is used to determine HAMP during the motion. In the first phase of the pick-up task, the primitives $\Phi$ , P, and O durations are close to the first phase’s duration. Therefore, HAMP in the first phase of the pick-up task is $\Phi$ PO. In the second phase of the pick-up task, the primitives p and O durations are close to the second phase’s duration. But, the maximum duration of primitive $\Phi$ is less than the duration of the second phase. Therefore, HAMP in the second phase of the pick-up task is $\Phi$ PO-PO.

In the delivery task, when ${R_{d}}\ge 1.6$ , HAMP of the delivery task is $\Phi$ PO. When ${R_{d}}\lt 1.6$ , the delivery task is divided into two motion phases. When ${R_{d1}}\ge 1.8$ and ${R_{d2}}\ge 1.6$ , the duration of the primitive $\Phi$ is close to the total duration. Therefore, HAMP of the first phase and the second phase is $\Phi$ PO. In the same way, when ${R_{d1}}\lt 1.8$ and ${R_{d2}}\lt 1.6$ , HAMP of the first motion phase and the second motion phase is PO- $\Phi$ PO and $\Phi$ PO-PO, respectively. The detailed flow of HAMP decision-making process of the delivery motion is shown in Fig. 8.

5.3. Duration allocation module

This module contains two sub-modules, the total motion duration module, and the primitive duration module. First, the total duration T is determined by Fitts’ Law [Reference Wei26, Reference Mackenzie27]:

(8) \begin{equation} T=a+b{{\log }_{2}}(2A/W)\ \end{equation}

where A is the Euclidean distance between the starting point and the target point, and W is the size of the target. Based on the experimental device in Fig. 2, W is set to 20 mm. a and b are the undetermined coefficients. According to the experimental data of Section 2.2, the values of a and b are obtained by the regression method. They are a = 0.3625 and b = 0.1325, respectively.

Figure 8. HAMP decision algorithm for delivery task.

Then, the total duration is allocated to each primitive in HAMP. From the analysis in Section 4.1, it can be seen that the duration of the primitive P and O is equal to the total duration, so the duration of the primitive P and O is T. The principle of the duration allocation for primitive $\Phi$ is

(9) \begin{equation} T_{\Phi 1}={{R}_{\Phi 1}}{{T}_{1}}\ \end{equation}

(10) \begin{equation} T_{\Phi 2}={{R}_{\Phi 2}}{{T}_{2}}\ \end{equation}

where ${T}_{1}$ and ${T}_{2}$ are the motion duration of the first and the second phases, respectively; ${T}_{1}$ is the time corresponding to the peak velocity of the primitive P; ${{T}_{2}}=T-{{T}_{1}}$ . ${T}_{\Phi 1}$ and ${T}_{\Phi 2}$ are the motion duration of primitive $\Phi$ in the first and second phases, respectively; ${R}_{\Phi 1}$ and ${R}_{\Phi 2}$ are the ratios of the duration of the primitive $\Phi$ in the first and second phase to the duration of each phase. Their values depend on ${R}_{d1}$ and ${R}_{d2}$ , respectively.

To reflect the difference in the motion of the human arm, the values of ${R}_{\Phi 1}$ and ${R}_{\Phi 2}$ are randomly selected within the variation range corresponding to ${R}_{d1}$ and ${R}_{d2}$ .

5.4. Joint angle solving module

This module is the primitive quantization module. The primitives $\Phi (t)$ , $P(t)$ , and $O(t)$ can be quantified by the following formula [Reference Shiqiu21]:

(11) \begin{equation} \hat{\Phi }(t)=\frac{{{A}_{\Phi }}}{2}\left ( 1-\cos\! \left ( \frac{2\pi t}{{{T}_{\Phi }}} \right ) \right )\ \end{equation}

(12) \begin{equation} \hat{O}(t)=\frac{{{A}_{0}}}{2}\left ( 1-\cos\! \left ( \frac{2\pi t}{{{T}_{o}}} \right ) \right )\ \end{equation}

(13) \begin{equation} \hat{\boldsymbol{{P}}}\left ( t \right )=\left ({{\boldsymbol{{P}}}_{0}}-{\boldsymbol{{P}}}_{f} \right )\left ( 60{{\tau }^{3}}-30{{\tau }^{4}}-30{{\tau }^{2}} \right )/{{T}_{p}}\ \end{equation}

where $\hat{\Phi }(t)$ , $\hat{\boldsymbol{{P}}}(t)$ , and $\hat{O}(t)$ are the derivatives of $\Phi (t)$ , $P(t)$ , and $O(t)$ , respectively. ${T}_{\Phi }$ , ${T}_{p}$ , and ${T}_{o}$ are the duration of the primitive $\Phi$ , P, and O, respectively. ${{A}_{\Phi }}=2({{\Phi }_{f}}-{{\Phi }_{0}})/{{T}_{\Phi }}$ , ${\Phi }_{0}$ , and ${\Phi }_{f}$ are the initial and end values of primitive $\Phi$ , respectively. ${{A}_{o}}=2({{O}_{f}}-{{O}_{0}})/{{T}_{o}}$ , ${O}_{0}$ , and ${O}_{f}$ are the initial and end values of primitive O, respectively. $\boldsymbol{{P}}_{0}$ , $\boldsymbol{{P}}_{f}$ is the starting point and the target point position, respectively. Moreover, $\tau ={t}/{{{T}_{p}}}\;$ , $t\in [0,{{T}_{p}}]$ .