Hostname: page-component-78c5997874-fbnjt Total loading time: 0 Render date: 2024-11-04T03:11:04.524Z Has data issue: false hasContentIssue false

Evaluation of the Kinematic Performance of a 3-RRS Parallel Mechanism

Published online by Cambridge University Press:  23 July 2020

Manxin Wang
Affiliation:
School of Mechanical Engineering, Nanjing University of Science and Technology, Nanjing210094, China
Qiusheng Chen
Affiliation:
School of Mechanical Engineering, Nanjing University of Science and Technology, Nanjing210094, China
Haitao Liu*
Affiliation:
Key Laboratory of Mechanism Theory and Equipment Design of Ministry of Education, Tianjin University, Tianjin300072, China
Tian Huang
Affiliation:
Key Laboratory of Mechanism Theory and Equipment Design of Ministry of Education, Tianjin University, Tianjin300072, China
Hutian Feng
Affiliation:
School of Mechanical Engineering, Nanjing University of Science and Technology, Nanjing210094, China
Wenjie Tian
Affiliation:
Key Laboratory of Mechanism Theory and Equipment Design of Ministry of Education, Tianjin University, Tianjin300072, China
*
*Corresponding author. E-mail: [email protected]

Summary

This paper proposes a set of novel indices for evaluating the kinematic performance of a 3-RRS (R and S denote revolute and spherical joint respectively, R denotes active joint.), parallel mechanism whose translational and rotational movements are strongly coupled. First, the indices are formulated using the decoupled overall Jacobian matrix, which is developed using coordinate transformation. Then, the influences of the homogeneous dimensionless parameters on these indices are investigated. In addition, the dimension synthesis of the 3-RRS parallel mechanism is carried out by minimizing the mean value of the kinematic performance indices and their standard deviation. The results demonstrate that the established approach facilitates good global kinematic performance of the parallel mechanism.

Type
Articles
Copyright
Copyright © The Author(s), 2020. Published by Cambridge University Press

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Li, Y. M. and Xu, Q. S., “Kinematic analysis of a 3-PRS parallel manipulator,Robot. Comput. Integr. Manuf. 23, 395408 (2007).CrossRefGoogle Scholar
Hennes, N. and Staimer, D., “Application of PKM in aerospace manufacturing high performance machining centers ECOSPEED, ECOSPEED-F and ECOLINER,” Proceedings of the 4th Chemnitz Parallel Kinematics Seminar, Chemnitz, 557577 (2004).Google Scholar
Olazagoitia, J. L. and Wyatt, S., “New PKM Tricept T9000 and its application to fexible manufacturing at aerospace industry,” SAE Technical Paper 2007-01-3820, https://doi.org/10.4271/2007-01-3820 (2007).Google Scholar
Bi, Z. M., “Kinetostatic modeling of Exechon parallel kinematic machine for stiffness analysis,” Int. J. Adv. Manuf. Technol. 71, 325335 (2014).CrossRefGoogle Scholar
Merlet, J. P., “Jacobian, manipulability, condition number, and accuracy of parallel robots,” J. Mech. Des. 128, 199206 (2005).CrossRefGoogle Scholar
Yoshikawa, T., “Manipulability of robotic mechanism,” Int. J. Robot Res. 4, 39 (1985).CrossRefGoogle Scholar
Gosselin, C. M. and Angeles, J., “The optimum kinematic design of a spherical three-degree-of-freedom parallel manipulator,” J. Mech. Trans. Autom Des. 111, 202207 (1989).CrossRefGoogle Scholar
Gosselin, C. M. and Angeles, J., “A global performance index for the kinematic optimization of robotic manipulators,” J. Mech. Des. 113, 220226 (1991).CrossRefGoogle Scholar
Lipkin, H. and Duffy, J., “Hybrid twist and wrench control for a robotic manipulator,” J. Mech. Trans. Autom Des. 110, 138144 (1988).CrossRefGoogle Scholar
Angeles, J., “Is there a characteristic length of a rigid-body displacement,” Mech. Mach. Theor. 41, 884896 (2006).CrossRefGoogle Scholar
Khan, W. A. and Angeles, J., “The kinetostatic optimization of robotic manipulators: the inverse and the direct problems,” J. Mech. Des. 128, 168178 (2005).CrossRefGoogle Scholar
Stocco, L., Salcudean, S. E. and Sassani, F., “Matrix normalization for optimal robot design,” Proceedings of the 1998 IEEE International Conference on Robotics & Automation, Leuven, Belgium (1998).Google Scholar
Pond, G. and Carretero, J. A., “Formulating Jacobian matrices for the dexterity analysis of parallel manipulators,” Mech. Mach. Theor. 41, 15051519 (2006).CrossRefGoogle Scholar
Liu, H. T., Huang, T. and Chetwynd, D. G., “A method to formulate a dimensionally homogeneous Jacobian of parallel manipulators,” IEEE Trans. Robot. 27, 150156 (2011).CrossRefGoogle Scholar
Kim, S. G. and Ryu, J., “New dimensionally homogeneous Jacobian matrix formulation by three end-effector points for optimal design of parallel manipulators,” IEEE Trans. Robot. Autom. 19, 731736 (2003).Google Scholar
Nurahmi, L. and Caro, S., “Dimensionally homogeneous Jacobian and condition number,” Appl. Mech. Mater. 836, 4247 (2016).CrossRefGoogle Scholar
Wu, G., Bai, S. and Caro, S., “A transmission quality index for a class of four-limb parallel schnflies motion generators,” ASME J. Mech. Robot. 5, 051014 (2018).CrossRefGoogle Scholar
Liu, S. T., Huang, T., Mei, J. P., Zhao, X. M., Wang, P. F. and Chetwynd, D. G., “Optimal design of a 4-DOF scara type parallel robot using dynamic performance indices and angular constraints,” ASME J. Mech. Robot. 4, 031005 (2012).CrossRefGoogle Scholar
Huang, T., Liu, S. T., Mei, J. P. and Chetwynd, D. G.. “Optimal design of a 2-DOF pick-and-place parallel robot using dynamic performance indices and angular constraints,” Mech. Mach. Theor. 70, 246253 (2013).CrossRefGoogle Scholar
Ball, R. S., A Treatise on the Theory of Screws (Cambridge University Press, Cambridge, UK, 1900).Google Scholar
Yuan, M. S. C., Freudenstein, F. and Woo, L. S., “Kinematic analysis of spatial mechanism by means of screw coordinates. Part 2-Analysis of spatial mechanisms,” J. Eng. Ind. 91, 6773 (1971).CrossRefGoogle Scholar
Sutherland, G. and Roth, B., “A transmission index for spatial mechanisms,” J. Eng. Ind. 95, 589597 (1973).CrossRefGoogle Scholar
Tsai, M. J. and Lee, H. W., “Generalized evaluation for the transmission performance of mechanisms,” Mech. Mach. Theor. 29, 607618 (1994).CrossRefGoogle Scholar
Chen, C. and Angeles, J., “Generalized transmission index and transmission quality for spatial linkages,” Mech. Mach. Theor. 42, 12251237 (2007).CrossRefGoogle Scholar
Takeda, Y. and Funabashi, H., “A transmission index for in–parallel wire–driven mechanisms,” JSME Int. J. Ser. C. Mech. Syst. Mach. Elements Manuf. 44, 180187 (2001).Google Scholar
Chang, W. T., Lin, C. C. and Lee, J. J., “Force transmissibility performance of parallel manipulators,” J. Field Robot. 20, 659670 (2003).Google Scholar
Bonev, I. A., Zlatanov, D. and Gosselin, C. M., “Singularity analysis of 3-DOF planar parallel mechanisms via screw theory,” J. Mech. Des. 125, 573581 (2003).Google Scholar
Wang, J. S., Wu, C. and Liu, X. J., “Performance evaluation of parallel manipulators: motion/force transmissibility and its index,” Mech. Mach. Theor. 45, 14621476 (2010).CrossRefGoogle Scholar
Liu, X. J., Wu, C. and Wang, J. S., “A new approach for singularity analysis and closeness measurement to singularities of parallel manipulators,” J. Mech. Robot. 4, 041001 (2012).CrossRefGoogle Scholar
Wu, G., Caro, S. and Wang, J., “Design and transmission analysis of an asymmetrical spherical parallel manipulator,” Mech. Mach. Theor. 94, 119131 (2015).CrossRefGoogle Scholar
Huang, T., Wang, M. X., Yang, S. F., Sun, T., Chetwynd, D. G. and Xie, F., “Force/Motion transmissibility analysis of six degree of freedom parallel mechanisms,” J. Mech. Robot. 6, 031010 (2014).CrossRefGoogle Scholar
Liu, H. T., Wang, M. X., Huang, T., Chetwynd, D. G. and Kecskeméthy, A., “A dual space approach for force/motion transmissibility analysis of lower mobility parallel manipulators,” J. Mech. Robot. 7, 034504 (2015).CrossRefGoogle Scholar
Li, Q. C., Zhang, N. B. and Wang, F. B., “New indices for optimal design of redundantly actuated parallel manipulators,” J. Mech. Robot. 9, 011007 (2016).CrossRefGoogle Scholar
Zhao, X. W., Liu, H. T., Ding, H. F. and Qian, L., “An approach for computing the transmission index of full mobility planar multiloop mechanisms,” J. Mech. Robot. 9, 041017 (2017).CrossRefGoogle Scholar
Liu, H. T., Huang, T., Kecskeméthy, A., Chetwynd, D. G. and Li, Q., “Force/motion transmissibility analyses of redundantly actuated and overconstrained parallel manipulators,” Mech. Mach. Theory. 109, 126138 (2017).CrossRefGoogle Scholar
Liu, H. T., Huang, T., Kecskeméthy, A. and Chetwynd, D. G., “A generalized approach for computing the transmission index of parallel mechanisms,” Mech. Mach. Theory. 74, 245256 (2014).CrossRefGoogle Scholar
Tsai, L. W., Robot Analysis: The Mechanics of Serial and Parallel Manipulators (Wiley-Interscience Publication, New York, 1999).Google Scholar
Huang, T., Liu, H. T. and Chetwynd, D. G., “Generalized Jacobian analysis of lower mobility manipulators,” Mech. Mach. Theory. 46(5), 831844 (2011).CrossRefGoogle Scholar
Huang, T., Yang, S. F., Wang, M. X., Sun, T. and Chetwynd, D. G., “An approach to determine the unknown twist/wrench subspaces of lower mobility serial kinematic chains,” J. Mech. Robot. 7(3), 031003 (2015).CrossRefGoogle Scholar
Censor, Y., “Pareto optimality in multiobjective problems,” Appl. Math. Optim. 4, 4159 (1997).CrossRefGoogle Scholar