Hostname: page-component-586b7cd67f-dlnhk Total loading time: 0 Render date: 2024-11-21T19:25:06.741Z Has data issue: false hasContentIssue false
  • English
  • Français

Effect of design parameters on strong and immobilizing grasps with an underactuated robotic hand

Published online by Cambridge University Press:  02 May 2022

Roshan Kumar Hota Open the ORCID record for Roshan Kumar Hota [Opens in a new window]  and
Cheruvu Siva Kumar Open the ORCID record for Cheruvu Siva Kumar [Opens in a new window]
Roshan Kumar Hota*
Affiliation:
Mechanical Engineering Department, Indian Institute of Technology, Kharagpur, India
Cheruvu Siva Kumar
Affiliation:
Mechanical Engineering Department, Indian Institute of Technology, Kharagpur, India
*
*Corresponding author. E-mail: [email protected]
Get access Rights & Permissions [Opens in a new window]

Abstract

This paper presents a study on the effect of design parameters of an underactuated hand on its grasp performance. Three kinds of grasp performance characteristics are considered: grasp range, grasp strength, and immobilizing grasp range. Grasp strength is defined as the stiffness of the grasp. Immobilizing grasps are those in which the object cannot be moved for a force up to a certain threshold. In general, underactuated hands cannot produce immobilizing grasps. However, we show that immobilizing grasps can be created by including joint limits in the hand design. We consider the effect of two design parameters on the grasp performance: torque ratio and finger-base distance. Results show that an optimal finger-base distance and torque ratio exists that maximizes the grasp range and grasp strength. Also, the immobilizing grasp range is increased by decreasing the finger-base distance and increasing the torque ratio and joint limits.

Keywords

robotic handsunderactuated handsgraspingmechanism designimmobilizing grasp
Type
Research Article
Information
Robotica , Volume 40 , Issue 11 , November 2022 , pp. 3769 - 3785
Copyright
© The Author(s), 2022. Published by Cambridge University Press

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Piazza, C., Grioli, G., Catalano, M. G. and Bicchi, A., “A century of robotic hands,” Annu. Rev. Control Robot. Auton. Syst. 2(1), 1–32 (2019).CrossRefGoogle Scholar
Hirose, S. and Umetani, Y., “The development of soft gripper for the versatile robot hand,” Mech. Mach. Theory 13(3), 351–359 (1978).CrossRefGoogle Scholar
Dollar, A. M. and Howe, R. D., “A highly adaptive SDM hand: Design and performance evaluation,” Int. J. Robot. Res. 5(5), 585–597 (2010).10.1177/0278364909360852CrossRefGoogle Scholar
Odhner, L. U., Jentoft, L. P., Claffee, M. R., Corson, N., Tenzer, Y., Ma, R. R., Buehler, M., Kohout, R., Howe, R. D. and Dollar, A. M., “A compliant, underactuated hand for robust manipulation,” Int. J. Robot. Res. 33(5), 736–752 (2014).10.1177/0278364913514466CrossRefGoogle Scholar
Catalano, M. G., Grioli, G., Farnioli, E., Serio, A., Piazza, C. and Bicchi, A., “Adaptive synergies for the design and control of the Pisa/IIT softHand,” Int. J. Robot. Res. 33(5), 768–782 (2014).10.1177/0278364913518998CrossRefGoogle Scholar
Ciocarlie, M., Hicks, F. M., Holmberg, R., Hawke, J., Schlicht, M., Gee, J., Stanford, S. and Bahadur, R., “The Velo gripper: A versatile single-actuator design for enveloping, parallel and fingertip grasps,” Int. J. Robot. Res. 335(5), 753–767 (2014).CrossRefGoogle Scholar
Gosselin, C., Pelletier, F. and Laliberte, T., “An Anthropomorphic Underactuated Robotic Hand with 15 DoFs and A Single Actuator,” In: 2008 IEEE International Conference on Robotics and Automation (ICRA) (2008) pp. 749–754.Google Scholar
Butterfaß, J., Grebenstein, M., Liu, H. and Hirzinger, G., “DLR-Hand II: Next Generation of a Dextrous Robot Hand,” In: IEEE International Conference on Robotics and Automation (ICRA, 2001), vol. 1 (2001) pp. 109–114.Google Scholar
Hota, R. K. and Kumar, C. S., “Effect of hand design and object size on the workspace of three-fingered hands,” Mech. Mach. Theory 133(14), 311–328 (2019).10.1016/j.mechmachtheory.2018.11.011CrossRefGoogle Scholar
Kragten, G. A., Baril, M., Gosselin, C. and Herder, J. L., “Stable precision grasps by underactuated grippers,” IEEE Trans. Robot. 27(6), 1056–1066 (2011).CrossRefGoogle Scholar
Yang, H., Wei, G., Ren, L., Qian, Z., Wang, K., Xiu, H. and Liang, W., “A low-cost linkage-spring-tendon-integrated compliant anthropomorphic robotic hand: MCR-Hand III,” Mech. Mach. Theory 158, 104210 (2021).CrossRefGoogle Scholar
Wang, D., Xiong, Y., Zi, B., Qian, S., Wang, Z. and Zhu, W., “Design, analysis and experiment of a passively adaptive underactuated robotic hand with linkage-slider and rack-pinion mechanisms,” Mech. Mach. Theory 155(2), 104092 (2021).10.1016/j.mechmachtheory.2020.104092CrossRefGoogle Scholar
Rossi, C., Savino, S., Niola, V. and Troncone, S., “A study of a robotic hand with tendon driven fingers,” Robotica 33(5), 1034–1048 (2015).10.1017/S0263574714001179CrossRefGoogle Scholar
Babin, V. and Gosselin, C., “Mechanisms for robotic grasping and manipulation,” Annu. Rev. Control Robot. Auton. Syst. 4(1), 573–593 (2021).CrossRefGoogle Scholar
Krut, S., “A Force-Isotropic Underactuated Finger,” In: IEEE International Conference on Robotics and Automation (ICRA), 2314–2319 (2005).Google Scholar
Su, M., Guan, Y., Huang, D. and Zhu, H., “Modeling and analysis of an adaptive soft gripper with the bio-inspired compliant mechanism,” Bioinspir. Biomim. 16(5), 055001 (2021).10.1088/1748-3190/ac07f7CrossRefGoogle ScholarPubMed
Boisclair, J. M., Laliberté, T. and Gosselin, C., “On the optimal design of underactuated fingers using rolling contact joints,” IEEE Robot. Automat. Lett. 6(3), 4656–4663 (2021).10.1109/LRA.2021.3068976CrossRefGoogle Scholar
Dollar, A. M. and Howe, R. D., “Joint coupling design of underactuated hands for unstructured environments,” Int. J. Robot. Res. 30(9), 1157–1169 (2001).10.1177/0278364911401441CrossRefGoogle Scholar
Birglen, L., Laliberté, T. and Gosselin, C. M.. Underactuated Robotic Hands, vol. 40 (Springer, Berlin, Heidelberg, 2007).Google Scholar
Birglen, L. and Gosselin, C. M., “On the Force Capability of Underactuated Fingers,” In: 2003 IEEE International Conference on Robotics and Automation (ICRA) , vol. 1 (2003) pp. 1139–1145.Google Scholar
Birglen, L. and Gosselin, C. M., “Kinetostatic analysis of underactuated fingers,” IEEE Trans. Robot. Autom. 20(2), 211–221 (2004).10.1109/TRA.2004.824641CrossRefGoogle Scholar
Ciocarlie, M. and Allen, P., “A Design and Analysis Tool for Underactuated Compliant Hands,” In: 2009 IEEE/RSJ International Conference on Intelligent Robots and Systems (ICRA) (2009) pp. 5234–5239.Google Scholar
Li, G., Xu, P., Qiao, S. and Li, B., “Stability analysis and optimal enveloping grasp planning of a deployable robotic hand,” Mech. Mach. Theory 158, 104241 (2021).10.1016/j.mechmachtheory.2020.104241CrossRefGoogle Scholar
Kragten, A. G. and Herder, J. L., “The ability of underactuated hands to grasp and hold objects,” Mech. Mach. Theory 45(3), 408–425 (2010).10.1016/j.mechmachtheory.2009.10.002CrossRefGoogle Scholar
Kragten, G. A., Helm, F. C. T. V. and Herder, J. L., “A planar geometric design approach for a large grasp range in underactuated hands,” Mech. Mach. Theory 46(8), 1121–1136 (2011).CrossRefGoogle Scholar
Ciocarlie, M. and Allen, P., “A constrained optimization framework for compliant underactuated grasping,” Mech. Sci. 2(1), 17–26 (2011).10.5194/ms-2-17-2011CrossRefGoogle Scholar
Bicchi, A. and Prattichizzo, D., “Analysis and optimization of tendinous actuation for biomorphically designed robotic systems,” Robotica 18(1), 23–31 (2000).CrossRefGoogle Scholar
Clark, A. B., Liow, L. and Rojas, N., “Force evaluation of tendon routing for underactuated grasping,” J. Mech. Design 143(10), 104502 (2021).10.1115/1.4050382CrossRefGoogle Scholar
Osman, A. C. A. R., Sağlam, H. and Ziya, Ş. A. K. A., “Evaluation of grasp capability of a gripper driven by optimal spherical mechanism,” Mech. Mach. Theory 166, 104486 (2021).Google Scholar
Krut, S., Bégoc, V., Dombre, E. and Pierrot, F., “Extension of the form-closure property to underactuated hands,” IEEE Trans. Robot. 26(5), 853–866 (2010).10.1109/TRO.2010.2060830CrossRefGoogle Scholar