Hostname: page-component-586b7cd67f-dlnhk Total loading time: 0 Render date: 2024-11-22T08:45:58.240Z Has data issue: false hasContentIssue false
  • English
  • Français

Design and operation of a 2-DOF leg–wheel hybrid robot

Published online by Cambridge University Press:  07 June 2013

Erika Ottaviano  and
Pierluigi Rea
Erika Ottaviano*
Affiliation:
Department of Civil and Mechanical Engineering, University of Cassino and Southern Lazio, Cassino, Italy
Pierluigi Rea
Affiliation:
Department of Civil and Mechanical Engineering, University of Cassino and Southern Lazio, Cassino, Italy
*
*Corresponding author. E-mail: [email protected]/[email protected]
Get access Rights & Permissions [Opens in a new window]

Summary

In this paper the design and operation for a 2-Degree-of-Freedom, leg–wheel hybrid mobile robot are presented. A prototype of a low-cost and easy-to-use system, which is capable of straight walking and steering with two actuators only, has been designed and built. Simulation and experimental tests have been carried out to verify the engineering feasibility and operation of the proposed solution. The designed robot can be used for applications such as surveillance and inspection of disaster sites.

Keywords

Walking robotsHybrid mobile robotsKinematicsSimulationExperimental tests
Type
Articles
Information
Robotica , Volume 31 , Issue 8 , December 2013 , pp. 1319 - 1325
Copyright
Copyright © Cambridge University Press 2013 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1.Morecki, A. and Knapczyk, J., Basics of Robotics: Theory and Components of Manipulators and Robots (Springer, New York, NY, 1999).CrossRefGoogle Scholar
2.Morales, R., Feliu, V., Gonzalez, A. and Pintado, P., “Coordinated Motion of a New Staircase Climbing Wheelchair With Increased Passenger Comfort,” In: Proceedings of the IEEE International Conference on Robotics and Automation, Orlando, Florida (May 2006), pp. 3995–4001, Art. N. 1642315.Google Scholar
3.Wettergreen, D., Moreland, S. and Skonieczny, K., “Design and field experimentation of a prototype lunar prospector,” Int. J. Robot. Res. 29 (12), 1550–1564 (2010).CrossRefGoogle Scholar
4.Kececi, E. F., “Design and prototype of mobile robots for rescue operations,” Robotica 27 (5), 729–737 (2009).CrossRefGoogle Scholar
5.Yang, Y., Qian, H., Wu, X., Xu, G. and Xu, Y., “A Novel Design of Tri-Star Wheeled Mobile Robot for High Obstacle Climbing,” In: Proceedings of the IEEE/RSJ International Conference on Intelligent Robots and Systems, Vilamoura, Portugal (2012), pp. 920–925.Google Scholar
6.Song, S. M., Lee, J. K. and Waldron, K. J., “Motion study of two and three dimensional pantograph mechanisms,” Mech. Mach. Theory 22 (4), 321–331 (1987).CrossRefGoogle Scholar
7.Castelli, G. and Ottaviano, E., “Design, Simulation and Experimental Tests of a Hybrid Rover for Overpassing Obstacles,” In: Field Robotics Proceedings of the 14th International Conference on Climbing and Walking Robots and the Support Technologies for Mobile Machines, University Pierre et Marie Curie (UPMC), Paris, France (Bidaud, Philippeet al. eds.) (Sep. 6–8, 2011) pp. 658–665. doi:10.1142/9789814374286_0077.Google Scholar
8.Gonzalez Rodriguez, A., Rodriguez, A. Gonzalez and Rea, P., “A new articulated leg for mobile robots,” J. Ind. Robot. 38 (5), 521–532 (2011).CrossRefGoogle Scholar
9.Yuan, J. and Hirose, S., “Zero carrier: A novel eight leg wheels hybrid stair climbing mobile vehicle,” J. Robot. Mechatron. 17 (1), 44–51 (2005).CrossRefGoogle Scholar
10.Gonzalez, A., Ottaviano, E. and Ceccarelli, M., “On the kinematic functionality of a four-bar based mechanism for guiding wheels in climbing steps and obstacles,” Mech. Mach. Theory 44 (8), 1507–1523 (2009).CrossRefGoogle Scholar
11.Aoki, T., Murayama, Y. and Hirose, S., “Mechanical Design of Three-Wheeled Lunar Rover; ‘Tri-Star IV’,” In: Proceedings of the IEEE International Conference on Robotics and Automation, Shangai, China (2011), pp. 2198–2203.Google Scholar
12.Hirose, S. and Takeuchi, H., “Study on Roller-Walker (Basics Characteristics and its Control),” In: Proceedings of the IEEE International Conference on Robotics and Automation, Minneapolis, Minnesota (1996) pp. 3265–3270.CrossRefGoogle Scholar
13.Grand, C., Benamar, F., Plumet, F. and Bidaud, P., “Stability and traction optimized of a reconfigurable wheel-legged robot,” Int. J. Robot. Res. 23 (10–11), 1041–1058 (2004).CrossRefGoogle Scholar
14.Ottaviano, E., Vorotnikov, S., Ceccarelli, M. and Kurenev, P., “Design improvements and control of a hybrid walking robot,” Robot. Auton. Syst. 59, 128–141 (2011).CrossRefGoogle Scholar
15.Figliolini, G., Conte, M. and Rea, P., “Algebraic algorithm for the kinematic analysis of slider-crank/rocker mechanisms,” J. Mech. Robot. 4 (1) (2012), art. no. 011003. doi:10.1115/1.4005527.CrossRefGoogle Scholar
16.Figliolini, G., Conte, M. and Rea, P., “Analysis and Synthesis of Slider-Crank Mechanisms for Automatic Machinery,” Proceedings of the ASME International Design Engineering Technical Conferences (IDETC) and Computers and Information in Engineering Conference (CIE), New York (2008) ISBN-0-7918-3831-5, DETC2008-49863.Google Scholar
17.Plitea, N., Lese, D., Pisla, D. and Vaida, C., “Structural design and kinematics of a new parallel reconfigurable robot,” Robot. Comp. Int. Manuf. 29 (1), 219–235 (2013).CrossRefGoogle Scholar
18.Figliolini, G., Rea, P. and Angeles, J., “The Synthesis of the Axodes of Spatial Four-Bar Linkages,” Proceedings of the ASME International Design Engineering Technical Conferences (IDETC) and Computers and Information in Engineering Conference (CIE), Chicago, Illinois (2012), DETC2012–71255.Google Scholar
19.Pisla, D., Plitea, N., Vidrean, A.et al., “Kinematics and Design of Two Variants of a Reconfigurable Parallel Robot,” In: Proceedings of the International Conference on Reconfigurable Mechanisms and Robots (ReMAR 2009), London (2009) pp. 565–572.Google Scholar