Crossref Citations
This article has been cited by the following publications. This list is generated based on data provided by
Crossref.
Monkman, G.J.
1995.
Robot Grippers for Use With Fibrous Materials.
The International Journal of Robotics Research,
Vol. 14,
Issue. 2,
p.
144.
Monkman, G J
1995.
The electrorheological effect under compressive stress.
Journal of Physics D: Applied Physics,
Vol. 28,
Issue. 3,
p.
588.
Monkman, G.J.
1997.
An Analysis of Astrictive Prehension.
The International Journal of Robotics Research,
Vol. 16,
Issue. 1,
p.
1.
Chu, Sang-Hyon
Lee, Seung Jong
and
Ahn, Kyung Hyun
2000.
An experimental study on the squeezing flow of electrorheological suspensions.
Journal of Rheology,
Vol. 44,
Issue. 1,
p.
105.
Monkman, Gareth
2001.
Workpiece retention during machine processing.
Assembly Automation,
Vol. 21,
Issue. 1,
p.
61.
Ozcelik, Babur
Erzincanli, Fehmi
and
Findik, Fehim
2003.
Evaluation of handling results of various materials using a non‐contact end‐effector.
Industrial Robot: An International Journal,
Vol. 30,
Issue. 4,
p.
363.
Ozcelik, Babur
and
Erzincanli, Fehmi
2005.
Examination of the movement of a woven fabric in the horizontal direction using a non-contact end-effector.
The International Journal of Advanced Manufacturing Technology,
Vol. 25,
Issue. 5-6,
p.
527.
Mantriota, Giacomo
2007.
Theoretical model of the grasp with vacuum gripper.
Mechanism and Machine Theory,
Vol. 42,
Issue. 1,
p.
2.
Ruffatto, D.
Shah, J.
and
Spenko, M.
2013.
Optimization and experimental validation of electrostatic adhesive geometry.
p.
1.
Lessing, Joshua
Glavan, Ana C.
Walker, S. Brett
Keplinger, Christoph
Lewis, Jennifer A.
and
Whitesides, George M.
2014.
Inkjet Printing of Conductive Inks with High Lateral Resolution on Omniphobic “RF Paper” for Paper‐Based Electronics and MEMS.
Advanced Materials,
Vol. 26,
Issue. 27,
p.
4677.
Ruffatto, Donald
Beganovic, Dzenis
Parness, Aaron
and
Spenko, Matthew
2014.
Experimental evaluation of adhesive technologies for robotic grippers on micro-rough surfaces.
p.
6150.
Ruffatto, Donald
Beganovic, Dzenis
Parness, Aaron
and
Spenko, Matthew
2014.
Experimental results of a controllable electrostatic/gecko-like adhesive on space materials.
p.
1.
Ruffatto, Donald
Shah, Jainam
and
Spenko, Matthew
2014.
Increasing the adhesion force of electrostatic adhesives using optimized electrode geometry and a novel manufacturing process.
Journal of Electrostatics,
Vol. 72,
Issue. 2,
p.
147.
Wang, Liyu
and
Iida, Fumiya
2015.
Deformation in Soft-Matter Robotics: A Categorization and Quantitative Characterization.
IEEE Robotics & Automation Magazine,
Vol. 22,
Issue. 3,
p.
125.
Guo, J
Tailor, M
Bamber, T
Chamberlain, M
Justham, L
and
Jackson, M
2016.
Investigation of relationship between interfacial electroadhesive force and surface texture.
Journal of Physics D: Applied Physics,
Vol. 49,
Issue. 3,
p.
035303.
Bar-Cohen, Yoseph
Vidal, Frédéric
Duduta, Mihai
Wood, Robert J.
and
Clarke, David R.
2016.
Flexible, stretchable electroadhesives based on acrylic elastomers.
Vol. 9798,
Issue. ,
p.
97981D.
Shintake, Jun
Rosset, Samuel
Schubert, Bryan
Floreano, Dario
and
Shea, Herbert
2016.
Versatile Soft Grippers with Intrinsic Electroadhesion Based on Multifunctional Polymer Actuators.
Advanced Materials,
Vol. 28,
Issue. 2,
p.
231.
Tadakuma, Kenjiro
2017.
Principle and Embodiment of Embracing Gripper Mechanisms.
Journal of the Robotics Society of Japan,
Vol. 35,
Issue. 1,
p.
36.
Guo, Jianglong
Bamber, Thomas
Zhao, Yuchen
Chamberlain, Matthew
Justham, Laura
and
Jackson, Michael
2017.
Toward Adaptive and Intelligent Electroadhesives for Robotic Material Handling.
IEEE Robotics and Automation Letters,
Vol. 2,
Issue. 2,
p.
538.
Akaiwa, Michiro
2017.
Behavior of an electrorheological chain under squeeze flow.
Journal of Intelligent Material Systems and Structures,
Vol. 28,
Issue. 4,
p.
531.