Crossref Citations
This article has been cited by the following publications. This list is generated based on data provided by
Crossref.
Kouris, Alexandros
Dimeas, Fotios
and
Aspragathos, Nikos
2016.
Contact distinction in human-robot cooperation with admittance control.
p.
001951.
Popov, Dmitry
Klimchik, Alexandr
and
Mavridis, Nikolaos
2017.
Collision detection, localization & classification for industrial robots with joint torque sensors.
p.
838.
Li, Zhi-Jing
Wu, Hai-Bin
Yang, Jian-Ming
Wang, Ming-Hao
and
Ye, Jin-Hua
2018.
A Position and Torque Switching Control Method for Robot Collision Safety.
International Journal of Automation and Computing,
Vol. 15,
Issue. 2,
p.
156.
Kouris, Alexandros
Dimeas, Fotios
and
Aspragathos, Nikos
2018.
A Frequency Domain Approach for Contact Type Distinction in Human–Robot Collaboration.
IEEE Robotics and Automation Letters,
Vol. 3,
Issue. 2,
p.
720.
Ren, Tianyu
Dong, Yunfei
Wu, Dan
and
Chen, Ken
2018.
Collision detection and identification for robot manipulators based on extended state observer.
Control Engineering Practice,
Vol. 79,
Issue. ,
p.
144.
Wang, Pengcheng
Zhang, Dengfeng
and
Lu, Baochun
2019.
Collision detection and force control based on the impedance approach and dynamic modelling.
Industrial Robot: the international journal of robotics research and application,
Vol. 47,
Issue. 6,
p.
813.
Sharkawy, Abdel-Nasser
Koustoumpardis, Panagiotis N.
and
Aspragathos, Nikos A.
2019.
Advances in Service and Industrial Robotics.
Vol. 67,
Issue. ,
p.
3.
Min, Feiyan
Wang, Gao
and
Liu, Ning
2019.
Collision Detection and Identification on Robot Manipulators Based on Vibration Analysis.
Sensors,
Vol. 19,
Issue. 5,
p.
1080.
Zhang, Tie
and
Hong, JingDong
2019.
Collision detection method for industrial robot based on envelope-like lines.
Industrial Robot: the international journal of robotics research and application,
Vol. 46,
Issue. 4,
p.
510.
Popov, D. I.
and
Klimchik, A. S.
2019.
The Use of Joints Force Sensors to Determine the Collision Location and Type for an Industrial Robot.
Mekhatronika, Avtomatizatsiya, Upravlenie,
Vol. 20,
Issue. 3,
p.
171.
Xu, Jingjing
Zhang, Caixia
Liu, Zhifeng
and
Pei, Yanhu
2019.
A Review on Significant Technologies Related to the Robot-Guided Intelligent Bolt Assembly Under Complex or Uncertain Working Conditions.
IEEE Access,
Vol. 7,
Issue. ,
p.
136752.
Gordić, Zaviša
and
Jovanović, Kosta
2020.
Collision Detection on Industrial Robots in Repetitive Tasks Using Modified Dynamic Time Warping.
Robotica,
Vol. 38,
Issue. 10,
p.
1717.
Sharkawy, Abdel-Nasser
Koustoumpardis, Panagiotis N.
and
Aspragathos, Nikos
2020.
Human–robot collisions detection for safe human–robot interaction using one multi-input–output neural network.
Soft Computing,
Vol. 24,
Issue. 9,
p.
6687.
Lu, Chunfeng
and
Zhang, Weiping
2020.
Kalman tracking algorithm of ping-pong robot based on fuzzy real-time image.
Journal of Intelligent & Fuzzy Systems,
Vol. 38,
Issue. 4,
p.
3585.
Ghidini, S.
Beschi, M.
and
Pedrocchi, N.
2020.
A Robust Linear Control Strategy to Enhance Damping of a Series Elastic Actuator on a Collaborative Robot.
Journal of Intelligent & Robotic Systems,
Vol. 98,
Issue. 3-4,
p.
627.
Chemweno, Peter
Pintelon, Liliane
and
Decre, Wilm
2020.
Orienting safety assurance with outcomes of hazard analysis and risk assessment: A review of the ISO 15066 standard for collaborative robot systems.
Safety Science,
Vol. 129,
Issue. ,
p.
104832.
do Nascimento, Elidiane Pereira
and
Nogueira, Tatiane
2020.
Intelligent Systems.
Vol. 12320,
Issue. ,
p.
245.
Popov, Dmitry
and
Klimchik, Alexandr
2020.
Transfer Learning for Collision Localization in Collaborative Robotics.
p.
1.
Sharkawy, Abdel-Nasser
Koustoumpardis, Panagiotis N.
and
Aspragathos, Nikos
2020.
Neural Network Design for Manipulator Collision Detection Based Only on the Joint Position Sensors.
Robotica,
Vol. 38,
Issue. 10,
p.
1737.
Dobra, Zoltan
and
Dhir, Krishna S.
2020.
Technology jump in the industry: human–robot cooperation in production.
Industrial Robot: the international journal of robotics research and application,
Vol. 47,
Issue. 5,
p.
757.