Crossref Citations
This article has been cited by the following publications. This list is generated based on data provided by
Crossref.
Lee, T.C.
and
Perng, M.H.
2007.
Analysis of simplified position and 5-DOF total orientation workspaces of a hexapod mechanism.
Mechanism and Machine Theory,
Vol. 42,
Issue. 12,
p.
1577.
Gogu, G.
2009.
Structural synthesis of maximally regular T3R2-type parallel robots via theory of linear transformations and evolutionary morphology.
Robotica,
Vol. 27,
Issue. 1,
p.
79.
Lu, Yi
and
Xu, Jiayin
2009.
Simulation solving/modifying velocity and acceleration of a 4UPS+SPR type parallel machine tool during normal machining of a 3D free-form surface.
The International Journal of Advanced Manufacturing Technology,
Vol. 42,
Issue. 7-8,
p.
804.
Lu, Yi
Xu, Jiayin
and
Yu, Jianping
2010.
Simulation of pre-solving active forces of a 4SPS+SPR parallel machine tool in normal machining a 3D free-form surface.
The International Journal of Advanced Manufacturing Technology,
Vol. 46,
Issue. 1-4,
p.
21.
Gallardo-Alvarado, Jaime
Orozco-Mendoza, Horacio
and
Rico-Martínez, José M.
2010.
A novel five-degrees-of-freedom decoupled robot.
Robotica,
Vol. 28,
Issue. 6,
p.
909.
Lu, Yi
Wang, Peng
Zhao, Shaohua
Hu, Bo
Han, Jianda
and
Sui, Chunping
2014.
Kinematics and statics analysis of a novel 5-DoF parallel manipulator with two composite rotational/linear active legs.
Robotics and Computer-Integrated Manufacturing,
Vol. 30,
Issue. 1,
p.
25.
Meng, Xiangdun
Gao, Feng
Wu, Shengfu
and
Ge, Qiaode Jeffery
2014.
Type synthesis of parallel robotic mechanisms: Framework and brief review.
Mechanism and Machine Theory,
Vol. 78,
Issue. ,
p.
177.
Cao, Rui
Gao, Feng
Zhang, Yong
Pan, Dalei
and
Chen, Weixing
2015.
A New Parameter Design Method of a 6-DOF Parallel Motion Simulator for a Given Workspace.
Mechanics Based Design of Structures and Machines,
Vol. 43,
Issue. 1,
p.
1.
Cao, Rui
Gao, Feng
Zhang, Yong
and
Pan, Dalei
2015.
A key point dimensional design method of a 6-DOF parallel manipulator for a given workspace.
Mechanism and Machine Theory,
Vol. 85,
Issue. ,
p.
1.
Lu, Yi
Liu, Yang
and
Ye, Nijia
2016.
Dynamics analysis of a novel 5-DoF 3SPU+2SPRR type parallel manipulator.
Advanced Robotics,
Vol. 30,
Issue. 9,
p.
595.
Fu, Jianxun
Gao, Feng
Chang, G.A.
Ma, M.
Arumuga Perumal, S.
and
Chen, G.
2016.
Kinematic Performances of a Novel TLPM Parallel Robot.
MATEC Web of Conferences,
Vol. 40,
Issue. ,
p.
03001.
Fu, Jianxun
and
Gao, Feng
2016.
Optimal design of a 3-leg 6-DOF parallel manipulator for a specific workspace.
Chinese Journal of Mechanical Engineering,
Vol. 29,
Issue. 4,
p.
659.
Fu, Jianxun
and
Gao, Feng
2016.
Designing a Novel Three-Degree-of-Freedom Parallel Robot Based on Workspace.
International Journal of Advanced Robotic Systems,
Vol. 13,
Issue. 1,
Lu, Yi
Liu, Yang
Zhang, Lijie
Ye, Nijia
and
Wang, Yongli
2018.
Dynamics analysis of a novel 5-DoF parallel manipulator with couple-constrained wrench.
Robotica,
Vol. 36,
Issue. 10,
p.
1421.
Yu, Haidong
Guo, Qiang
and
Cui, Guohua
2019.
Kinematics simulation of 5-DOF parallel mechanisms.
p.
712.
Guo, Qiang
Cui, Guohua
Zhang, Fan
Liu, Jian
and
Cheng, Zhenyi
2019.
Kinematics.Stiffness and Singularity Analysis of 3T2R 5-DOF Parallel Robot Mechanism.
p.
758.
Lu, Yang
Lu, Yi
Liu, Yang
Hu, Bo
and
Gong, Yufeng
2019.
Dynamics analysis of novel parallel manipulator with one central rotational actuator and four translational actuators.
Journal of Mechanical Science and Technology,
Vol. 33,
Issue. 6,
p.
2893.
Lu, Bofan
Cui, Guohua
and
Guo, Qiang
2020.
Static and Dynamic Analysis of a 2T3R Five-degree-of-freedom Parallel Mechanism.
IOP Conference Series: Materials Science and Engineering,
Vol. 751,
Issue. 1,
p.
012060.