Hostname: page-component-cd9895bd7-7cvxr Total loading time: 0 Render date: 2024-12-25T01:00:23.170Z Has data issue: false hasContentIssue false
  • English
  • Français

Auto-laydown robot for space solar module

Published online by Cambridge University Press:  01 September 2007

Yuexin Wu ,
Hui Zhao ,
Zhuang Fu ,
Yanzheng Zhao  and
Peibo Li
Yuexin Wu
Affiliation:
The Robotics Institute, School of Mechanical Engineering, Shanghai Jiao Tong University, 800 Dongchuan Road, Shanghai 200240, P.R. China.
Hui Zhao
Affiliation:
The Robotics Institute, School of Mechanical Engineering, Shanghai Jiao Tong University, 800 Dongchuan Road, Shanghai 200240, P.R. China.
Zhuang Fu
Affiliation:
The Robotics Institute, School of Mechanical Engineering, Shanghai Jiao Tong University, 800 Dongchuan Road, Shanghai 200240, P.R. China.
Yanzheng Zhao*
Affiliation:
The Robotics Institute, School of Mechanical Engineering, Shanghai Jiao Tong University, 800 Dongchuan Road, Shanghai 200240, P.R. China.
Peibo Li
Affiliation:
The Robotics Institute, School of Mechanical Engineering, Shanghai Jiao Tong University, 800 Dongchuan Road, Shanghai 200240, P.R. China.
*
*Corresponding author. E-mail: [email protected]
Get access Rights & Permissions [Opens in a new window]

Summary

This paper discusses about auto-laydown robot (ALR), which is applied to performing the laydown process of a solar module on earth. The robot consists of an adhesive dispensing mechanism, an auto-laydown mechanism, a pneumatic system and a control system. The method of gripping solar cells is described based on pneumatic technology. Meanwhile, a new method of controlling adhesive thickness and area during dispensing is proposed in this paper. The robot realizes the automatic laydown process of solar modules and can control the laydown pressure effectively. Compared with the manual method, the robot could control the dispensing volume and the adhesive area between solar modules and panel substrates, by means of experiments. The novel ALR greatly improves the laydown quality of solar modules and meets the lightweight trend of solar cells development.

Keywords

Auto-laydown robot (ALR)Solar moduleGrippingDispensing mechanism
Type
Article
Information
Robotica , Volume 25 , Issue 5 , September 2007 , pp. 575 - 580
Copyright
Copyright © Cambridge University Press 2007

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1.Fu, Z., Zhao, Y. and Yang, Q. et al. , “Auto-bonding robot for space solar cells,” Robotica 23, 561–565 2005.CrossRefGoogle Scholar
2.Yanzheng, Z., Zhuang, F., Qinghua, Y. et al. , “Study on Quality Control in the Bonding Processing of Space Solar Cell,” Proceedings of 2004 International Conference on the Business of Electronic Product Reliability and Liability 2004 pp. 9–12.Google Scholar
3.Zhuang, F., Yanzheng, Z., Yang, L. et al. , “Solar Cell Crack Inspection by Image Processing,” Proceedings of 2004 International Conference on the Business of Electronic Product Reliability and Liability 2004 pp. 77–80.Google Scholar
4.Wojtczuk, S. and Reinhardt, K., “High-Power Density (1040 W/kg) GaAs Cells for Ultralight Aircraft,” Proceedings of the 25th IEEE Photovoltaic Specialists Conference 1996 pp. 49–52.Google Scholar
5.Lin, L., “Modern small satellites and its key technology,” Chinese Space Sci. Technol. 4, 37–43 1995.Google Scholar
6.Li, G., “The progress of Shanghai spacecraft EPS technology in the 20th century,” Aerospace Shanghai 3, 42–48 2002.Google Scholar
7.Freundlich, A., “Development of GaAs space solar cells by high growth rate MOMBE/CBE,” J. Crystal Growth 209, 481–485 2000.Google Scholar
8.Zweibel, K., Harnessing Solar Power: The Photovoltaics Challenge (Plenum, New York, 1990.Google Scholar
9.Bush, R., “Matching fluid dispensers to materials for electronics applications,” Electron. Packag. Prod. 37 (9), 6–62 1997.Google Scholar
10.Nowlan, M. J., Tobin, S. P. and Darkazalli, G. “Direct cover glass bonding to GaAs and GaAs/Ge solar cells,” Proceedings of the IEEE 22nd Photovoltaic Specialists Conference 1991 pp. 1480–1484.CrossRefGoogle Scholar