Hostname: page-component-78c5997874-xbtfd Total loading time: 0 Render date: 2024-11-06T09:19:48.418Z Has data issue: false hasContentIssue false

Underwater inspection of offshore structures

Published online by Cambridge University Press:  05 December 2011

P. H. Milne
Affiliation:
Department of Civil Engineering, University of Strathclyde
Get access

Synopsis

Under the Offshore Installations (Construction and Survey) Regulations 1974 all structures established or maintained in UK waters must possess a valid certificate of fitness. To obtain this certificate annual visual inspections of parts of the structure must be carried out both above and below water. A major survey of the complete structure or platform is required every five years.

Underwater inspections may be carried out down to 50 m by divers on surface demand. Below 50 m when divers are involved it is essential to use either a diving bell or lock-out submersible. To avoid saturation diving and reduce diving hazards, the unmanned submersible has been developed as an underwater inspection tool.

Various navigation systems have been developed for offshore position fixing. Deepwater navigation and surveying relies on a combination of surface radio stations and seabed underwater acoustic transponders. Platform navigation for underwater inspection and maintenance is a major problem due to poor diving access and few underwater reference points.

The inefficiency of the present diver operated navigation and survey systems round platforms is now being investigated by a research team from the University of Strathclyde. Preliminary tests of equipment have already been carried out in a diving tank and at sea.

Type
Research Article
Copyright
Copyright © Royal Society of Edinburgh 1978

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Bainton, K. F. et al, 1975. The Underwater Inspection of Fixed Offshore Platforms—A Review and Assessment of Techniques. Report SMT/R7403. A.E.R.E. Harwell. London, H.M.S.O.Google Scholar
Beyerstein, G., 1977. The Influence of Deep Water Structures on the Equipment and Techniques of Inspection. Proc. Soc. Underwater Technol. Conf. Underwater Maintenance of Steel Platforms, 2326. London.Google Scholar
Bircham, J. and Skidmore, G., 1976. Operational Use and Techniques with an Unmanned Cable Controlled Submersible in the North Sea Environment. 8th Annual Offshore Technol. Conf, Houston, Paper, OTC2710, 1049–1056.Google Scholar
Borjeson, G., 1975. Underwater Inspections by means of Photographic Cameras. Proc. 4th World Congress Underwater Authorities, Stockholm, 553–560.Google Scholar
Holland, R. H., 1976. Applications for Diver Lockout Submersibles. 8th Annual Offshore Technol. Conf, Houston, Paper, OTC2708, 1031–1035.CrossRefGoogle Scholar
Hunting, R. H., 1976. Cormorant Pipe Line. Hunting Surveys Ltd.Google Scholar
Manuel, J., 1976. Unmanned Reconnaissance: An Emerging Underwater Technology. Sea Technol., 17(12), 1417 and 35.Google Scholar
Porta, D. W., 1977. An Acoustic Navigation System for Offshore Positioning Applications. Sea Technol., 18(5), 1820.Google Scholar
Scorer, M., 1977. Underwater Work—Submersibles. Proc. Conf Instrumentation and Safety in the Oil and Natural Gas Industries, Glasgow.Google Scholar
Street, R., 1977a. Department of Energy Requirements for the Inspection and Maintenance of Steel Offshore Structures for Oil and Gas. Proc. Soc. Underwater Technol. Conf. Underwater Maintenance of Steel Platforms, 36, London.Google Scholar
Street, R.,, 1977b. Legislation and Maintenance: Present Acts and their Implications. Proc. R & M 77 Conf. Planning for the Future—Day 2—Below Water Line Aspects. Brighton, 71–76.Google Scholar
Thornton, P., 1977. Techniques and Approved Methods of Structural Inspection, Site Location and Preparation. Proc. R & M 77 Conf. Planning for the Future—Day 2—Below Water Line Aspects. Brighton, 90104.Google Scholar