Hostname: page-component-586b7cd67f-vdxz6 Total loading time: 0 Render date: 2024-11-26T12:25:38.307Z Has data issue: false hasContentIssue false
  • English
  • Français

TOWARDS SUSTAINABLE LIFE CYCLES OF MAKING IN SMALL SCALE FABRICATION SPACES

Published online by Cambridge University Press:  19 June 2023

George Edward Moore ,
Alice M. Agogino  and
Kosa Goucher-Lambert
George Edward Moore*
Affiliation:
Massachusetts Institute of Technology;
Alice M. Agogino
Affiliation:
University of California, Berkeley
Kosa Goucher-Lambert
Affiliation:
University of California, Berkeley
*
Moore, George, Edward Massachusetts Institute of Technology, United States of America, [email protected]

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the ‘Save PDF’ action button.

Small scale fabrication spaces have shown their potential to support our local supply chains during the collapse of many global supply chain networks at the onset of the COVID-19 pandemic. In anticipation of these spaces becoming more significant in local supply chains, it is increasingly important to reduce their environmental impacts. This work investigates the life cycle of small scale fabrication spaces by interviewing 18 participants from these spaces in the United States. Key insights from the interviews include the following: a) material selection, robust inventory management, and user support for material disposal are factors influencing optimal flow of materials and equipment through a fabrication space; b) lack of information from manufacturers and suppliers is a critical obstacle to achieve optimal use of materials and equipment, and informed decision making related to environmental sustainability and ethical labor practices; c) there are opportunities to take advantage of where financial and sustainability goals align; d) individual motivators for fabrication influences sustainable behaviors; and e) effective education about material and equipment use helps fabrication space users with more sustainable decision making.

Keywords

Product Lifecycle Management (PLM)SustainabilityHuman behaviour in design
Type
Article
Information
Proceedings of the Design Society , Volume 3: ICED23 , July 2023 , pp. 3611 - 3620
Creative Commons
Creative Common License - CCCreative Common License - BYCreative Common License - NCCreative Common License - ND
This is an Open Access article, distributed under the terms of the Creative Commons Attribution-NonCommercial-NoDerivatives licence (http://creativecommons.org/licenses/by-nc-nd/4.0/), which permits non-commercial re-use, distribution, and reproduction in any medium, provided the original work is unaltered and is properly cited. The written permission of Cambridge University Press must be obtained for commercial re-use or in order to create a derivative work.
Copyright
The Author(s), 2023. Published by Cambridge University Press

References

Andrews, D. (2015), “The circular economy, design thinking and education for sustainability”, Local Economy: The Journal of the Local Economy Policy Unit, Vol. 30 No. 3, pp. 305–315, http://doi.org/10.1177/0269094215578226.CrossRefGoogle Scholar
Capps, K. (2020), “We need to make a lot of stuff. the makers are on it.”, Bloomberg.com. https://www.bloomberg.com/news/articles/2020-04-06/the-maker-movement-mobilizes-to-fight-coronavirusGoogle Scholar
DeCuir-Gunby, J.T., Marshall, P.L. and McCulloch, A.W. (2011), “Developing and using a codebook for the analysis of interview data: An example from a professional development research project”, Field Methods, Vol. 23 No. 2, pp. 136–155, http://doi.org/10.1177/1525822X10388468.CrossRefGoogle Scholar
Diez, T. (2011), “Locally produced, globally connected self-sufficient cities”, Fab City Foundation. https://fab.city/resources/whitepaper/Google Scholar
Faludi, J., Bayley, C., Bhogal, S. and Iribarne, M. (2015), “Comparing environmental impacts of additive manufacturing vs traditional machining via life-cycle assessment”, Rapid Prototyping Journal, Vol. 21 No. 1, pp. 14–33, http://doi.org/10.1108/RPJ-07-2013-0067.CrossRefGoogle Scholar
Galvin, R. (2015), “How many interviews are enough? do qualitative interviews in building energy consumption research produce reliable knowledge?”, Journal of Building Engineering, Vol. 1, pp. 2–12, http://doi.org/10.1016/j.jobe.2014.12.001.CrossRefGoogle Scholar
Gardner, T., Benzie, M., Borner, J., Dawkins, E., Fick, S., Garrett, R., Godar, J., Grimard, A., Lake, S., Larsen, R., Mardas, N., McDermott, C., Meyfroidt, P., Osbeck, M., Persson, M., Sembres, T., Suavet, C., Strassburg, B., Trevisan, A., West, C. and Wolvekamp, P. (2019), “Transparency and sustainability in global commodity supply chains”, World Development, Vol. 121, pp. 163–177, http://doi.org/10.1016/j.worlddev.2018.05.025.CrossRefGoogle ScholarPubMed
Guest, G., Bunce, A. and Johnson, L. (2006), “How many interviews are enough?: An experiment with data saturation and variability”, Field Methods, Vol. 18 No. 1, pp. 59–82.CrossRefGoogle Scholar
Hennelly, P.A., Srai, J.S., Graham, G., Meriton, R. and Kumar, M. (2019), “Do makerspaces represent scalable production models of community-based redistributed manufacturing?”, Production Planning & Control, Vol. 30 No. 7, pp. 540–554, http://doi.org/10.1080/09537287.2018.1540056.CrossRefGoogle Scholar
Kellens, K., Rodrigues, G.C., Dewulf, W. and Duflou, J.R. (2014), “Energy and resource efficiency of laser cutting processes”, Physics Procedia, Vol. 56, pp. 854–864, http://doi.org/10.10164.phpro.2014.08.104.CrossRefGoogle Scholar
Klemichen, A., Roeder, I., Ringhof, J. and Stark, R. (2018), “Needs and requirements for environmental-friendly product development in makerspaces - a survey of german makerspaces”, in: Towards a Circular Economy 7th International Symposium and Environmental Exhibition, Going Green Care Innovation 2018, p. 10.Google Scholar
Kohtala, C. and Hyysalo, S. (2015), “Anticipated environmental sustainability of personal fabrication”, Journal of Cleaner Production, Vol. 99, pp. 333–344, http://doi.org/10.1016/jjclepro.2015.02.093.CrossRefGoogle Scholar
Vasquez, Lazaro, Wang, E.S., and Vega, H.C., K. (2020), ”Introducing the sustainable prototyping life cycle for digital fabrication to designers”, in: Proceedings of the 2020 ACM Designing Interactive Systems Conference, DIS '20: Designing Interactive Systems Conference 2020, ACM, pp. 1301–1312, http://doi.org/10.1145/3357236.3395510.CrossRefGoogle Scholar
Pierce, M. (2020), “Makerspaces playing vital role in producing masks for health care workers”, Concord Monitor. Section: News/State. https://www.concordmonitor.com/Granite-State-News-Collaborative-33711608Google Scholar
Saldana, J. (2013), The coding manual for qualitative researchers, SAGE, 2nd ed edition. OCLC: ocn796279115.Google Scholar
Ulrich, K.T. and Eppinger, S.D. (2016), Product design and development, McGraw-Hill Education, New York, NY, sixth edition edition.Google Scholar
Yilbas, B.S., Shaukat, M.M. and Ashraf, F. (2017), “Laser cutting of various materials: Kerf width size analysis and life cycle assessment of cutting process”, Optics & Laser Technology, Vol. 93, pp. 67–73, http://doi.org/10.1016/j.optlastec.2017.02.014.CrossRefGoogle Scholar