Hostname: page-component-cd9895bd7-mkpzs Total loading time: 0 Render date: 2025-01-03T17:12:53.914Z Has data issue: false hasContentIssue false
  • English
  • Français

SURFACE ROUGHNESS CONSIDERATIONS IN DESIGN FOR ADDITIVE MANUFACTURING - A LITERATURE REVIEW

Published online by Cambridge University Press:  27 July 2021

Didunoluwa Obilanade ,
Christo Dordlofva  and
Peter Törlind
Didunoluwa Obilanade*
Affiliation:
Luleå University of Technology;
Christo Dordlofva
Affiliation:
Luleå University of Technology; GKN Aerospace Engine Systems
Peter Törlind
Affiliation:
Luleå University of Technology;
*
Obilanade, Didunoluwa Abiodun, Luleå University of Technology, Product Innovation, Sweden, [email protected]

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the ‘Save PDF’ action button.

One often-cited benefit of using metal additive manufacturing (AM) is the possibility to design and produce complex geometries that suit the required function and performance of end-use parts. In this context, laser powder bed fusion (LPBF) is one suitable AM process. Due to accessibility issues and cost-reduction potentials, such ‘complex’ LPBF parts should utilise net-shape manufacturing with minimal use of post-process machining. The inherent surface roughness of LPBF could, however, impede part performance, especially from a structural perspective and in particular regarding fatigue. Engineers must therefore understand the influence of surface roughness on part performance and how to consider it during design. This paper presents a systematic literature review of research related to LPBF surface roughness. In general, research focuses on the relationship between surface roughness and LPBF build parameters, material properties, or post-processing. Research on design support on how to consider surface roughness during design for AM is however scarce. Future research on such supports is therefore important given the effects of surface roughness highlighted in other research fields.

Keywords

Laser Powder Bed FusionSurface RoughnessDesign for Additive Manufacturing (DfAM)Design for X (DfX)Design engineering
Type
Article
Information
Proceedings of the Design Society , Volume 1: ICED21 , August 2021 , pp. 2841 - 2850
Creative Commons
Creative Common License - CCCreative Common License - BYCreative Common License - NCCreative Common License - ND
This is an Open Access article, distributed under the terms of the Creative Commons Attribution-NonCommercial-NoDerivatives licence (http://creativecommons.org/licenses/by-nc-nd/4.0/), which permits non-commercial re-use, distribution, and reproduction in any medium, provided the original work is unaltered and is properly cited. The written permission of Cambridge University Press must be obtained for commercial re-use or in order to create a derivative work.
Copyright
The Author(s), 2021. Published by Cambridge University Press

References

Ahn, D., Kim, H. and Lee, S. (2007), “Fabrication direction optimization to minimize post-machining in layered manufacturing”, International Journal of Machine Tools and Manufacture, Vol. 47 No. 3-4, pp. 593–606. https://doi.org/10.1016/j.ijmachtools.2006.05.004.CrossRefGoogle Scholar
Aliprandi, P., Giudice, F., Guglielmino, E. and Sili, A. (2019), “Tensile and Creep Properties Improvement of Ti-6Al-4V Alloy Specimens Produced by Electron Beam Powder Bed Fusion Additive Manufacturing”, Metals, Vol. 9 No. 11, p. 1207. https://doi.org/10.3390/met9111207.CrossRefGoogle Scholar
AlMangour, B. and Yang, J.-M. (2016), “Improving the surface quality and mechanical properties by shot-peening of 17-4 stainless steel fabricated by additive manufacturing”, Materials & Design, Elsevier Ltd, Vol. 110, pp. 914–924. https://doi.org/10.1016/j.matdes.2016.08.037.Google Scholar
Artzt, K., Mishurova, T., Bauer, P.-P., Gussone, J., Barriobero-Vila, P., Evsevleev, S., Bruno, G., et al. . (2020), “Pandora's Box–Influence of Contour Parameters on Roughness and Subsurface Residual Stresses in Laser Powder Bed Fusion of Ti-6Al-4V”, Materials, Vol. 13 No. 15, p. 3348. https://doi.org/10.3390/ma13153348.CrossRefGoogle ScholarPubMed
Baciu, A.M., Bejinariu, C., Corăbieru, A., Mihalache, E., Lupu–Poliac, M., Baciu, C. and Baciu, E.R. (2019), “Influence of process parameters for Selective Laser Melting on the roughness of 3D printed surfaces in Co-Cr dental alloy powder”, IOP Conference Series: Materials Science and Engineering, Vol. 572 No. 1, p. 012054. https://doi.org/10.1088/1757-899X/572/1/012054.CrossRefGoogle Scholar
Balachandramurthi, A.R., Moverare, J., Dixit, N. and Pederson, R. (2018), “Influence of defects and as-built surface roughness on fatigue properties of additively manufactured Alloy 718”, Materials Science and Engineering A, Vol. 735, pp. 463–474. https://doi.org/10.1016/j.msea.2018.08.072.CrossRefGoogle Scholar
Balbaa, M.A., Ghasemi, A., Fereiduni, E., Elbestawi, M.A., Jadhav, S.D. and Kruth, J.-P. (2021), “Role of powder particle size on laser powder bed fusion processability of AlSi10mg alloy”, Additive Manufacturing, Vol. 37, p. 101630. https://doi.org/10.1016/j.addma.2020.101630.CrossRefGoogle Scholar
Bayati, P., Safaei, K., Nematollahi, M., Jahadakbar, A., Yadollahi, A., Mahtabi, M. and Elahinia, M. (2020), “Toward understanding the effect of remelting on the additively manufactured NiTi”, International Journal of Advanced Manufacturing Technology. https://doi.org/10.1007/s00170-020-06378-4.Google Scholar
Bean, G.E., Witkin, D.B., McLouth, T.D., Patel, D.N. and Zaldivar, R.J. (2018), “Effect of laser focus shift on surface quality and density of Inconel 718 parts produced via selective laser melting”, Additive Manufacturing, Vol. 22, pp. 207–215. https://doi.org/10.1016/j.addma.2018.04.024.CrossRefGoogle Scholar
Becker, T.H., Dhansay, N.M., Haar, G.M. Ter and Vanmeensel, K. (2020), “Near-threshold fatigue crack growth rates of laser powder bed fusion produced Ti-Aal-4V”, Acta Materialia, Elsevier Ltd, Vol. 197, pp. 269–282. https://doi.org/10.1016/j.actamat.2020.07.049.CrossRefGoogle Scholar
Bouland, C., Urlea, V., Beaubier, K., Samoilenko, M. and Brailovski, V. (2019), “Abrasive flow machining of laser powder bed-fused parts: Numerical modeling and experimental validation”, Journal of Materials Processing Technology, Vol. 273. https://doi.org/10.1016/j.jmatprotec.2019.116262.CrossRefGoogle Scholar
Minetola, Calignano and. (2019), “Influence of Process Parameters on the Porosity, Accuracy, Roughness, and Support Structures of Hastelloy X Produced by Laser Powder Bed Fusion”, Materials, Vol. 12 No. 19, p. 3178. https://doi.org/10.3390/ma12193178.Google Scholar
Chen, H., Gu, D., Xiong, J. and Xia, M. (2017), “Improving additive manufacturing processability of hard-to-process overhanging structure by selective laser melting”, Journal of Materials Processing Technology, Vol. 250, pp. 99–108. https://doi.org/10.1016/j.jmatprotec.2017.06.044.CrossRefGoogle Scholar
Chen, R., Imani, F., Reutzel, E. and Yang, H. (2019), “From Design Complexity to Build Quality in Additive Manufacturing-A Sensor-Based Perspective”, IEEE Sensors Letters, Vol. 3 No. 1. https://doi.org/10.1109/LSENS.2018.2880747.CrossRefGoogle Scholar
Conlon, M.J. and Azari, K. (2018), “Impact of powder size, size distribution and morphology on additive manufacturing”, Advances in Powder Metallurgy and Particulate Materials - 2018: Proceedings of the 2018 International Conference on Powder Metallurgy and Particulate Material, POWDERMET 2018, Vol. 2018-June, pp. 745–754.Google Scholar
Dhansay, N.M., Tait, R. and Becker, T. (2014), Fatigue and Fracture Toughness of Ti-6Al-4V Titanium Alloy Manufactured by Selective Laser Melting, Advanced Materials Research, Vol. 1019. https://doi.org/10.4028/www.scientific.net/AMR.1019.248.CrossRefGoogle Scholar
Diaz, A. (2019), “Surface texture characterization and optimization of metal additive manufacturing-produced components for aerospace applications”, Additive Manufacturing for the Aerospace Industry, Elsevier, pp. 341–374. https://doi.org/10.1016/B978-0-12-814062-8.00018-2.CrossRefGoogle Scholar
Diegel, O., Nordin, A. and Motte, D. (2019), A Practical Guide to Design for Additive Manufacturing, Springer Singapore, Singapore, available at: http://link.springer.com/10.1007/978-981-13-8281-9 (accessed 11 December 2020). https://doi.org/10.1007/978-981-13-8281-9.Google Scholar
Dordlofva, C., Brodin, S. and Andersson, C. (2019), “Using demonstrator hardware to develop a future qualification logic for additive manufacturing parts”, Proceedings of the International Astronautical Congress, IAC.Google Scholar
Dordlofva, C. and Törlind, P. (2018), “Design for qualification: A process for developing additive manufacturing components for critical systems”, Proceedings of NordDesign: Design in the Era of Digitalization, NordDesign 2018.Google Scholar
Dordlofva, C. and Törlind, P. (2020), “Evaluating design uncertainties in additive manufacturing using design artefacts: examples from space industry”, Design Science, Vol. 6, p. e12. https://doi.org/10.1017/dsj.2020.11.CrossRefGoogle Scholar
Eidt, W., Tatman, E.P., McCarther, J., Kastner, J., Gunther, S. and Gockel, J. (2019), “Surface roughness characterization in laser powder bed fusion additive manufacturing”, Solid Freeform Fabrication 2019: Proceedings of the 30th Annual International Solid Freeform Fabrication Symposium - An Additive Manufacturing Conference, SFF 2019, pp. 2165–2176.Google Scholar
Eliaz, N., Foucks, N., Geva, D., Oren, S., Shriki, N., Vaknin, D., Fishman, D., et al. . (2020), “Comparative quality control of titanium alloy Ti-6Al-4V, 17-4 PH stainless steel, and aluminum alloy 4047 either manufactured or repaired by laser engineered net shaping (LENS)”, Materials, Vol. 13 No. 18. https://doi.org/10.3390/ma13184171.CrossRefGoogle Scholar
Ellis, A., Brown, R. and Hopkinson, N. (2015), “The effect of build orientation and surface modification on mechanical properties of high speed sintered parts”, Surface Topography: Metrology and Properties, Vol. 3 No. 3. https://doi.org/10.1088/2051-672X/3/3/034005.Google Scholar
Ewald, A. and Schlattmann, J. (2018), “Design guidelines for laser metal deposition of lightweight structures”, Journal of Laser Applications, Vol. 30 No. 3. https://doi.org/10.2351/1.5040612.CrossRefGoogle Scholar
Fatemi, A., Molaei, R. and Phan, N. (2020), “Multiaxial fatigue of additive manufactured metals: Performance, analysis, and applications”, International Journal of Fatigue, Vol. 134, p. 105479. https://doi.org/10.1016/j.ijfatigue.2020.105479.CrossRefGoogle Scholar
Frkán, M., Konecná, R. and Nicoletto, G. (2017), “Surface quality and fabrication directionality effects on the fatigue behavior of DMLS Ti6Al4V”, METAL 2017 - 26th International Conference on Metallurgy and Materials, Conference Proceedings, Vol. 2017-Janua, pp. 1567–1572.Google Scholar
Gilbert, D. and Smith, B. (2020), “A flexible finishing solution to accelerate the uptake of AM components into high value manufacturing industries”, Euro PM 2018 Congress and Exhibition.Google Scholar
Gorsse, S., Hutchinson, C., Gouné, M. and Banerjee, R. (2017), “Additive manufacturing of metals: a brief review of the characteristic microstructures and properties of steels, Ti-6Al-4V and high-entropy alloys”, Science and Technology of Advanced Materials, Vol. 18 No. 1, pp. 584–610. https://doi.org/10.1080/14686996.2017.1361305.CrossRefGoogle ScholarPubMed
Harada, Y., Ishida, Y., Miura, D., Watanabe, S., Aoki, H., Miyasaka, T. and Shinya, A. (2020), “Mechanical properties of selective laser sintering pure titanium and ti-6al-4v, and its anisotropy”, Materials, Vol. 13 No. 22, pp. 1–18. https://doi.org/10.3390/ma13225081.CrossRefGoogle ScholarPubMed
ISO/ASTM 52910. (2018), “Additive manufacturing — Design — Requirements, guidelines and recommendations”, ISO/ASTM.Google Scholar
ISO/ASTM 52911-1-19. (2019), Additive Manufacturing — Design — Part 1: Laser-Based Powder Bed Fusion of Metals, ASTM International.Google Scholar
Kaynak, Y. and Tascioglu, E. (2020), “Post-processing effects on the surface characteristics of Inconel 718 alloy fabricated by selective laser melting additive manufacturing”, Progress in Additive Manufacturing, Vol. 5 No. 2, pp. 221–234. https://doi.org/10.1007/s40964-019-00099-1.CrossRefGoogle Scholar
Khorasani, A.M., Gibson, I., Ghasemi, A. and Ghaderi, A. (2020), “Modelling of laser powder bed fusion process and analysing the effective parameters on surface characteristics of Ti-6Al-4V”, International Journal of Mechanical Sciences, Vol. 168, p. 105299. https://doi.org/10.1016/j.ijmecsci.2019.105299.CrossRefGoogle Scholar
Kokkonen, P., Salonen, L., Virta, J., Hemming, B., Laukkanen, P. and Savolainen, M. (2016), “Design guide for additive manufacturing of metal components by SLM process”, Digital Open Access Repository of VTT, VTT Technical Research Centre of Finland, p. 131.Google Scholar
Lee, J.-Y., Nagalingam, A.P. and Yeo, S.H. (2020), “A review on the state-of-the-art of surface finishing processes and related ISO/ASTM standards for metal additive manufactured components”, Virtual and Physical Prototyping, pp. 1–29. https://doi.org/10.1080/17452759.2020.1830346.Google Scholar
Liu, Z., Wang, X., Kim, H., Zhou, Y., Cong, W. and Zhang, H. (2018), “Investigations of Energy Density Effects on Forming Accuracy and Mechanical Properties of Inconel 718 Fabricated by LENS Process”, Procedia Manufacturing, Vol. 26, pp. 731–739. https://doi.org/10.1016/j.promfg.2018.07.083.CrossRefGoogle Scholar
Louw, D.F. and Pistorius, P.G.H. (2019), “The effect of scan speed and hatch distance on prior-beta grain size in laser powder bed fused Ti-6Al-4V”, International Journal of Advanced Manufacturing Technology, Vol. 103 No. 5-8, pp. 2277–2286. https://doi.org/10.1007/s00170-019-03719-w.CrossRefGoogle Scholar
Malz, S., Nosir, S., Trudel, E., Elsayed, M.S.A., Kok, L. and Provost, E. (2019), “Effect of ultrasonic impact treatment on the stress-controlled fatigue performance of additively manufactured ti-6al-4v alloy”, AIAA Scitech 2019 Forum. https://doi.org/10.2514/6.2019-0414.CrossRefGoogle Scholar
Mohammad, A., Al-Ahmari, A.M., AlFaify, A. and Mohammed, M.K. (2017), “Effect of melt parameters on density and surface roughness in electron beam melting of gamma titanium aluminide alloy”, Rapid Prototyping Journal, Vol. 23 No. 3, pp. 474–485. https://doi.org/10.1108/RPJ-12-2014-0187.CrossRefGoogle Scholar
Moher, D., Liberati, A., Tetzlaff, J., Altman, D.G. and Group, T.P. (2009), “Preferred Reporting Items for Systematic Reviews and Meta-Analyses: The PRISMA Statement”, Vol. 6 No. 7. https://doi.org/10.1371/journal.pmed.1000097.CrossRefGoogle Scholar
Molaei, R. and Fatemi, A. (2018), “Fatigue Design with Additive Manufactured Metals: Issues to Consider and Perspective for Future Research”, Procedia Engineering, Vol. 213, pp. 5–16. https://doi.org/10.1016/j.proeng.2018.02.002.CrossRefGoogle Scholar
Mondragón-Rodríguez, G.C., Torres-Padilla, N., Camacho, N., Espinosa-Arbeláez, D.G., de León-Nope, G. V., González-Carmona, J.M. and Alvarado-Orozco, J.M. (2020), “Surface modification and tribological behavior of plasma nitrided Inconel 718 manufactured via direct melting laser sintering method”, Surface and Coatings Technology, Vol. 387. https://doi.org/10.1016/j.surfcoat.2020.125526.CrossRefGoogle Scholar
Mower, T.M. and Long, M.J. (2016), “Mechanical behavior of additive manufactured, powder-bed laser-fused materials”, Materials Science and Engineering A, Vol. 651, pp. 198–213. https://doi.org/10.1016/j.msea.2015.10.068.CrossRefGoogle Scholar
Nicoletto, G., Konečna, R., Frkan, M. and Riva, E. (2020), “Influence of layer-wise fabrication and surface orientation on the notch fatigue behavior of as-built additively manufactured Ti6Al4V”, International Journal of Fatigue, Vol. 134 No. October 2019. https://doi.org/10.1016/j.ijfatigue.2020.105483.CrossRefGoogle Scholar
Oter, Z.C., Coskun, M. and Koc, E. (2020), “Effect of building platform position on the surface quality, dimensional accuracy, and geometrical precision of direct metal laser sintering (DMLS) parts”, Euro PM 2018 Congress and Exhibition.10.2139/ssrn.3785856CrossRefGoogle Scholar
Piscopo, G., Salmi, A. and Atzeni, E. (2019), “On the quality of unsupported overhangs produced by laser powder bed fusion”, International Journal of Manufacturing Research, Vol. 14 No. 2, pp. 198–216. https://doi.org/10.1504/IJMR.2019.100012.CrossRefGoogle Scholar
du Plessis, A. and Beretta, S. (2020), “Killer notches: The effect of as-built surface roughness on fatigue failure in AlSi10Mg produced by laser powder bed fusion”, Additive Manufacturing, Elsevier, Vol. 35 No. June, p. 101424. https://doi.org/10.1016/j.addma.2020.101424.CrossRefGoogle Scholar
Rott, S., Ladewig, A., Friedberger, K., Casper, J., Full, M. and Schleifenbaum, J.H. (2020), “Surface roughness in laser powder bed fusion – Interdependency of surface orientation and laser incidence”, Additive Manufacturing, Elsevier B.V., Vol. 36. https://doi.org/10.1016/j.addma.2020.101437.Google Scholar
Sagbas, B. (2020), “Post-Processing Effects on Surface Properties of Direct Metal Laser Sintered AlSi10Mg Parts”, Metals and Materials International, Vol. 26 No. 1, pp. 143–153. https://doi.org/10.1007/s12540-019-00375-3.CrossRefGoogle Scholar
Saltzman, D., Bichnevicius, M., Lynch, S., Simpson, T.W., Reutzel, E.W., Dickman, C. and Martukanitz, R. (2018), “Design and evaluation of an additively manufactured aircraft heat exchanger”, Applied Thermal Engineering, Vol. 138, pp. 254–263. https://doi.org/10.1016/j.applthermaleng.2018.04.032.CrossRefGoogle Scholar
Sanaei, N. and Fatemi, A. (2020), “Analysis of the effect of surface roughness on fatigue performance of powder bed fusion additive manufactured metals”, Theoretical and Applied Fracture Mechanics, Elsevier, Vol. 108 No. May, p. 102638. https://doi.org/10.1016/j.tafmec.2020.102638.CrossRefGoogle Scholar
Schnabel, T., Oettel, M. and Mueller, B. (2017), Design for Additive Manufacturing Guidelines and Case Studies for Metal Applications Prepared for Industry Canada-Manufacturing & Life Sciences Branch, Dresden.Google Scholar
Shrestha, R., Simsiriwong, J. and Shamsaei, N. (2019), “Fatigue behavior of additive manufactured 316L stainless steel parts: Effects of layer orientation and surface roughness”, Additive Manufacturing, Vol. 28, pp. 23–38. https://doi.org/10.1016/j.addma.2019.04.011.CrossRefGoogle Scholar
Sprengel, M., Baca, A., Gumpinger, J., Connolley, T., Brandao, A., Rohr, T. and Ghidini, T. (2019), Fatigue Properties of Powder Bed Fused Inconel 718 in As-Built Surface Condition, Structural Integrity, Vol. 7. https://doi.org/10.1007/978-3-030-13980-3_12.CrossRefGoogle Scholar
Vayssette, B., Saintier, N., Brugger, C., El May, M. and Pessard, E. (2019), “Numerical modelling of surface roughness effect on the fatigue behavior of Ti-6Al-4V obtained by additive manufacturing”, International Journal of Fatigue, Vol. 123, pp. 180–195. https://doi.org/10.1016/j.ijfatigue.2019.02.014.CrossRefGoogle Scholar
VDI 3405 Part 3. (2015), “Additive manufacturing processes, rapid manufacturing Design rules for part production using laser sintering and laser beam melting”.Google Scholar
Viespoli, L.M., Bressan, S., Itoh, T., Hiyoshi, N., Prashanth, K.G. and Berto, F. (2020), “Creep and high temperature fatigue performance of as build selective laser melted Ti-based 6Al-4V titanium alloy”, Engineering Failure Analysis, Elsevier, Vol. 111 No. October 2019, p. 104477. https://doi.org/10.1016/j.engfailanal.2020.104477.CrossRefGoogle Scholar
Wang, D., Liu, Y., Yang, Y. and Xiao, D. (2016), “Theoretical and experimental study on surface roughness of 316L stainless steel metal parts obtained through selective laser melting”, Rapid Prototyping Journal, Vol. 22 No. 4, pp. 706–716. https://doi.org/10.1108/RPJ-06-2015-0078.CrossRefGoogle Scholar
Wang, D., Mai, S., Xiao, D. and Yang, Y. (2016), “Surface quality of the curved overhanging structure manufactured from 316-L stainless steel by SLM”, The International Journal of Advanced Manufacturing Technology, Vol. 86 No. 1-4, pp. 781–792. https://doi.org/10.1007/s00170-015-8216-6.CrossRefGoogle Scholar
Yasa, E., Deckers, J. and Kruth, J.-P. (2011), “The investigation of the influence of laser re-melting on density, surface quality and microstructure of selective laser melting parts”, Rapid Prototyping Journal, Vol. 17 No. 5, pp. 312–327. https://doi.org/10.1108/13552541111156450.CrossRefGoogle Scholar
Zhang, D., Yu, J., Li, H., Zhou, X., Song, C., Zhang, C., Shen, S., et al. . (2020), “Investigation of laser polishing of four selective laser melting alloy samples”, Applied Sciences (Switzerland), Vol. 10 No. 3. https://doi.org/10.3390/app10030760.Google Scholar