Hostname: page-component-78c5997874-dh8gc Total loading time: 0 Render date: 2024-11-19T11:39:01.818Z Has data issue: false hasContentIssue false
  • English
  • Français

DERIVATION OF CRITERIA FOR ASSESSING SOLUTION PRINCIPLES CONFORMAL FOR ADDITIVE MANUFACTURING

Published online by Cambridge University Press:  27 July 2021

Gregory-Jamie Tüzün ,
Enno Garrelts ,
Daniel Roth  and
Hansgeorg Binz
Gregory-Jamie Tüzün*
Affiliation:
University of Stuttgart
Enno Garrelts
Affiliation:
University of Stuttgart
Daniel Roth
Affiliation:
University of Stuttgart
Hansgeorg Binz
Affiliation:
University of Stuttgart
*
Tüzün, Gregory-Jamie, University of Stuttgart, Institute for Engineering Design and Industrial Design, Germany, [email protected]

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the ‘Save PDF’ action button.

Additively manufactured final products and components are not always tailored to the additive manufacturing (AM) process, but they need to be in order to exploit the many advantages and potentials that AM provides. Therefore, an appropriate AM design should be targeted, which reduces the necessary iterations in the developing process of AM products. Although there is a large number of existing literature on the Design for Additive Manufacturing (DfAM), designers usually lack criteria in order to assess AM-conformity in conceptual design. In this paper, we provide a basis for the assessment of solution principles regarding their conformity for additive manufacturing.

First, existing literature on DfAM and AM products is reviewed comprehensively to derive criteria for the AM-conformity of solution principles. Subsequently, the correlations between these criteria are identified including the interdependencies to be considered when assessing AM-conformity. A basis for assessment is created, which offers designers early support in the development of AM-conformal designs.

Keywords

Additive ManufacturingDesign for Additive Manufacturing (DfAM)Conceptual designSolution principlesConformal Additive Manufacturing
Type
Article
Information
Proceedings of the Design Society , Volume 1: ICED21 , August 2021 , pp. 923 - 932
Creative Commons
Creative Common License - CCCreative Common License - BYCreative Common License - NCCreative Common License - ND
This is an Open Access article, distributed under the terms of the Creative Commons Attribution-NonCommercial-NoDerivatives licence (http://creativecommons.org/licenses/by-nc-nd/4.0/), which permits non-commercial re-use, distribution, and reproduction in any medium, provided the original work is unaltered and is properly cited. The written permission of Cambridge University Press must be obtained for commercial re-use or in order to create a derivative work.
Copyright
The Author(s), 2021. Published by Cambridge University Press

References

Adam, G.A. (2015), Systematische Erarbeitung von Konstruktionsregeln für die additiven Fertigungsverfahren Lasersintern, Laserschmelzen und Fused Deposition Modeling, Shaker Verlag, Aachen.Google Scholar
Adam, G.A. and Zimmer, D. (2014), “Design for Additive Manufacturing - Element transitions and aggregated structures”, Journal of Manufacturing Science and Technology, Vol. 7 No. 1, pp. 20–28. https://doi.org/10.1016/j.cirpj.2013.10.001.CrossRefGoogle Scholar
Adam, G.A. and Zimmer, D. (2015), “On design for additive manufacturing: evaluating geometrical limitations”, Rapid Prototyping Journal, Vol. 21 No. 6, pp. 662–670. https://doi.org/10.1108/RPJ-06-2013-0060.CrossRefGoogle Scholar
Ahtiluoto, M., Ellman, A.U. and Coatanea, E. (2019), “Model for Evaluating Additive Manufacturing Feasibility in End-Use Production”, 22nd International Conference on Engineering Design (ICED19), Delft, Netherlands, August 5-8, 2019, pp. 799–808. https://doi.org/10.1017/dsi.2019.84.Google Scholar
Allison, J., Sharpe, C., Seepersad, C.C. and Kubiak, S. (2017), “Powder Bed Fusion Metrology for Additive Manufacturing Design Guidance”, 28th Annual International Solid Freeform Fabrication Symposium, Austin, TX, August 7-9, 2017, University of Texas, Austin, TX, pp. 2737–2756.Google Scholar
Asadollahi-Yazdi, E., Gardan, J. and Lafon, P. (2019), “Multi-objective optimization approach in design for additive manufacturing for fused deposition modeling”, Rapid Prototyping Journal, Vol. 25 No. 5, pp. 875–887. https://doi.org/10.1108/RPJ-07-2018-0186.CrossRefGoogle Scholar
Atzeni, E. and Salmi, A. (2012), “Economics of additive manufacturing for end-usable metal parts”, The International Journal of Advanced Manufacturing Technology, Vol. 62 No. 9-12, pp. 1147–1155. https://doi.org/10.1007/s00170-011-3878-1.CrossRefGoogle Scholar
Baldinger, M., Levy, G., Schönsleben, P. and Wandfluh, M. (2016), “Additive manufacturing cost estimation for buy scenarios”, Rapid Prototyping Journal, Vol. 22 No. 6, pp. 871–877. https://doi.org/10.1108/RPJ-02-2015-0023.CrossRefGoogle Scholar
Blessing, L.T. and Chakrabarti, A. (2009), DRM, a Design Research Methodology, Springer-Verlag, London. https://doi.org/10.1007/978-1-84882-587-1.CrossRefGoogle Scholar
Booth, J.W., Alperovich, J., Chawla, P., Ma, J., Reid, T.N. and Ramani, K. (2017), “The Design for Additive Manufacturing Worksheet”, Journal of Mechanical Design, Vol. 139 No. 10, article number 100904. https://doi.org/10.1115/1.4037251.CrossRefGoogle Scholar
Borgue, O., Müller, J., Panarotto, M. and Isaksson, O. (2018), “Function modelling and constraints replacement to support design for additive manufacturing of satellite components”, NordDesign 2018, Linköping, Sweden, August 14-17, 2018.Google Scholar
Calignano, F., Iuliano, L., Galati, M., Minetola, P. and Marchiandi, G. (2020), “Accuracy of down-facing surfaces in complex internal channels produced by laser powder bed fusion (L-PBF)”, 13th CIRP Conference on Intelligent Computation in Manufacturing Engineering (ICME '19), Gulf of Naples, Italy, July 17-19, 2019, Elsevier B.V., pp. 423–426. https://doi.org/10.1016/j.procir.2020.05.073.Google Scholar
Castelão, A., Soares, B., Machado, C.M., Leite, M. and Mourão, A. (2019), “Design for AM: Contributions from surface finish, part geometry and part positioning”, 29th CIRP Design Conference, Póvoa de Varzim, Portugal, May 8-10, 2019, Elsevier B.V., pp. 491–495. https://doi.org/10.1016/j.procir.2019.04.247.Google Scholar
Changhui, S., Yongqiang, Y., Zefeng, X., Di, W., Yang, L. and Ruicheng, L. (2014), “Design and direct manufacture of non-assembly abacus by Selective Laser Melting”, International Symposium on Optoelectronic Technology and Application 2014, Beijing, China, March 13-15, 2014, SPIE, Washington, 929510. https://doi.org/10.1117/12.2072609.Google Scholar
Chekurov, S. and Lantela, T. (2017), “Selective Laser Melted Digital Hydraulic Valve System”, 3D Printing and Additive Manufacturing, Vol. 4 No. 4, pp. 215–221. https://doi.org/10.1089/3dp.2017.0014.CrossRefGoogle Scholar
Finazzi, V., Demir, A.G., Biffi, C.A., Chiastra, C., Migliavacca, F., Petrini, L. and Previtali, B. (2019), “Design Rules for Producing Cardiovascular Stents by Selective Laser Melting: Geometrical Constraints and Opportunities”, International Conference on Stents (ICS3M 2019), London, July 15-17, 2019, Elsevier B.V., pp. 16–23. https://doi.org/10.1016/j.prostr.2019.07.004.Google Scholar
François, M., Segonds, F., Rivette, M., Turpault, S. and Peyre, P. (2018), “Design for additive manufacturing (DfAM) methodologies: a proposal to foster the design of microwave waveguide components”, Virtual and Physical Prototyping, Vol. 14 No. 2, pp. 175–187. https://doi.org/10.1080/17452759.2018.1549901.CrossRefGoogle Scholar
Frandsen, C.S., Nielsen, M.M., Chaudhuri, A., Jayaram, J. and Govindan, K. (2020), “In search for classification and selection of spare parts suitable for additive manufacturing: a literature review”, International Journal of Production Research, Vol. 58 No. 4, pp. 970–996. https://doi.org/10.1080/00207543.2019.1605226.CrossRefGoogle Scholar
Galati, M., Calignano, F., Viccica, M. and Iuliano, L. (2020), “Additive Manufacturing Redesigning of Metallic Parts for High Precision Machines”, Crystals, Vol. 10 No. 3, article number 161. https://doi.org/10.3390/cryst10030161.CrossRefGoogle Scholar
Gebhardt, A. (2012), Understanding additive manufacturing: Rapid prototyping, rapid tooling, rapid manufacturing, Hanser Publishers, Munich, Cincinnati. https://doi.org/10.3139/9783446431621.Google Scholar
Hällgren, S., Pejryd, L. and Ekengren, J. (2016), “(Re)Design for Additive Manufacturing”, 26th CIRP Design Conference, Stockholm, June 15-17, 2016, Elsevier Ltd., pp. 246–251. https://doi.org/10.1016/j.procir.2016.04.150.Google Scholar
Jansen, B., Doubrovski, E.L. and Verlinden, J.C. (2014), “Animaris Geneticus Parvus: Design of a complex multi-body walking mechanism: Design of a complex multi-body walking mechanism”, Rapid Prototyping Journal, Vol. 20 No. 4, pp. 311–319. https://doi.org/10.1108/RPJ-10-2012-0087.CrossRefGoogle Scholar
Junk, S., Klerch, B. and Hochberg, U. (2019), “Structural Optimization in Lightweight Design for Additive Manufacturing”, 29th CIRP Design Conference, Póvoa de Varzim, Portugal, May 8-10, 2019, Elsevier B.V., pp. 277–282. https://doi.org/10.1016/j.procir.2019.04.277.Google Scholar
Kadkhoda-Ahmadi, S., Hassan, A. and Asadollahi-Yazdi, E. (2019), “Process and resource selection methodology in design for additive manufacturing”, The International Journal of Advanced Manufacturing Technology, Vol. 104, pp. 2013–2029. https://doi.org/10.1007/s00170-019-03991-w.CrossRefGoogle Scholar
Kajtaz, M., Witherow, B., Leary, M., Brandt, M. and Subic, A. (2015), “Design of a Personalised Faceguard for an Elite Cricketer”, 1st International Design Technology Conference (DESTECH2015), Geelong, Australia, June-July, 2015, Elsevier Ltd., pp. 199–205. https://doi.org/10.1016/j.protcy.2015.07.032.Google Scholar
Klahn, C., Leutenecker, B. and Meboldt, M. (2014), “Design for Additive Manufacturing – Supporting the Substitution of Components in Series Products”, 24th CIRP Design Conference, Milano, Italy, April 14-16, 2014, Elsevier B.V., pp. 138–143. https://doi.org/10.1016/j.procir.2014.03.145.Google Scholar
Klahn, C., Singer, D. and Meboldt, M. (2016), “Design Guidelines for Additive Manufactured Snap-Fit Joints”, 26th CIRP Design Conference, Stockholm, June 15-17, 2016, Elsevier Ltd., pp. 264–269. https://doi.org/10.1016/j.procir.2016.04.130.Google Scholar
Kumke, M. (2018), Methodisches Konstruieren von additiv gefertigten Bauteilen, Springer-Verlag, Wiesbaden. https://doi.org/10.1007/978-3-658-22209-3.CrossRefGoogle Scholar
Kumke, M., Watschke, H. and Vietor, T. (2016), “A new methodological framework for design for additive manufacturing”, Virtual and Physical Prototyping, Vol. 11 No. 1, pp. 3–19. https://doi.org/10.1080/17452759.2016.1139377.CrossRefGoogle Scholar
Laverne, F., Segonds, F., Anwer, N. and Le Coq, M. (2014), “DFAM in the design process: A proposal of classification to foster early design stages”, CONFERE, Sibenik, Croatia, Juli 3–4, 2014.Google Scholar
Laverne, F., Segonds, F., Anwer, N. and Le Coq, M. (2015), “Assembly Based Methods to Support Product Innovation in Design for Additive Manufacturing: An Exploratory Case Study”, Journal of Mechanical Design, Vol. 137 No. 12, article number 121701. https://doi.org/10.1115/1.4031589.CrossRefGoogle Scholar
Leutenecker-Twelsiek, B., Klahn, C. and Meboldt, M. (2016), “Considering Part Orientation in Design for Additive Manufacturing”, 26th CIRP Design Conference, Stockholm, June 15-17, 2016, Elsevier Ltd., pp. 408–413. https://doi.org/10.1016/j.procir.2016.05.016.Google Scholar
Lippert, B., Leuteritz, G. and Lachmayer, R. (2017), “An Approach to Implement Design for Additive Manufacturing in Engineering Studies”, 21st International Conference on Engineering Design, Vancouver, August 21-25, 2017, pp. 51–60.Google Scholar
Liu, W., Zhu, Z. and Ye, S. (2020), “A Decision-making Methodology Integrated in Product Design for Additive Manufacturing Process Selection”, Rapid Prototyping Journal, Vol. 26 No. 5, pp. 895–909. https://doi.org/10.1108/RPJ-06-2019-0174.CrossRefGoogle Scholar
Maidin, S.B., Campbell, I. and Pei, E. (2012), “Development of a design feature database to support design for additive manufacturing”, Assembly Automation, Vol. 32 No. 3, pp. 235–244. https://doi.org/10.1108/01445151211244375.CrossRefGoogle Scholar
Medellin-Castillo, H.I. and Zaragoza-Siqueiros, J. (2019), “Design and Manufacturing Strategies for Fused Deposition Modelling in Additive Manufacturing: A Review”, Chinese Journal of Mechanical Engineering, Vol. 32, article number 53. https://doi.org/10.1186/s10033-019-0368-0.CrossRefGoogle Scholar
Meisel, N.A., Woods, M.R., Simpson, T.W. and Dickman, C.J. (2017), “Redesigning a Reaction Control Thruster for Metal-Based Additive Manufacturing: A Case Study in Design for Additive Manufacturing”, Journal of Mechanical Design, Vol. 139 No. 10, article number 100903. https://doi.org/10.1115/1.4037250.CrossRefGoogle Scholar
Minguella-Canela, J., Morales Planas, S., Gomà Ayats, J.R. and Los Santos López, M.A. de (2018), “Assessment of the Potential Economic Impact of the Use of AM Technologies in the Cost Levels of Manufacturing and Stocking of Spare Part Products”, Materials, Vol. 11 No. 8, article number 1429. https://doi.org/10.3390/ma11081429.CrossRefGoogle ScholarPubMed
Orme, M.E., Gschweitl, M., Ferrari, M., Madera, I. and Mouriaux, F. (2017), “Designing for Additive Manufacturing: Lightweighting Through Topology Optimization Enables Lunar Spacecraft”, Journal of Mechanical Design, Vol. 139 No. 10, https://doi.org/10.1115/1.4037304.CrossRefGoogle Scholar
Orquéra, M., Campocasso, S. and Millet, D. (2017), “Design for additive manufacturing method for a mechanical system downsizing”, 27th CIRP Design Conference, Cranfield University, UK, May 10-12, 2017, Elsevier B.V., pp. 223–228. https://doi.org/10.1016/j.procir.2017.02.011.Google Scholar
Pahl, G., Beitz, W., Feldhusen, J. and Grote, K.-H. (2007), Engineering Design: A Systematic Approach, Springer-Verlag, London. https://doi.org/10.1007/978-1-84628-319-2.CrossRefGoogle Scholar
Perez, K.B., Anderson, D.S., Holtta-Otto, K. and Wood, K.L. (2015), “Crowdsourced Design Principles for Leveraging the Capabilities of Additive Manufacturing”, 20th International Conference on Engineering Design (ICED 15), Milan, July 27-30, 2015, Design Society, Glasgow, pp. 291–300.Google Scholar
Posser, T. and de Oliveira, B.F., (2020), “Design for additive manufacturing applied for mass reduction of a two-stroke engine cylinder for portable machine”, International Journal on Interactive Design and Manufacturing, Vol. 14 No. 2, pp. 709–717. https://doi.org/10.1007/s12008-019-00596-1.CrossRefGoogle Scholar
Pradel, P., Zhu, Z., Bibb, R. and Moultrie, J. (2018), “Investigation of design for additive manufacturing in professional design practice”, Journal of Engineering Design, Vol. 29 No. 4-5, pp. 165–200. https://doi.org/10.1080/09544828.2018.1454589.CrossRefGoogle Scholar
Priarone, P.C., Ingarao, G., Lunetto, V., Di Lorenzo, R. and Settineri, L. (2018), “The role of re-design for Additive Manufacturing on the process environmental performance”, 25th CIRP Life Cycle Engineering Conference (LCE), Copenhagen, April 30-March 2, 2018, Elsevier B.V., 124–129. https://doi.org/10.1016/j.procir.2017.11.047.Google Scholar
Rickenbacher, L., Spierings, A. and Wegener, K. (2013), “An integrated cost-model for selective laser melting (SLM)”, Rapid Prototyping Journal, Vol. 19 No. 3, pp. 208–214. https://doi.org/10.1108/13552541311312201.CrossRefGoogle Scholar
Rosen, D.W. (2007), “Computer-Aided Design for Additive Manufacturing of Cellular Structures”, Computer-Aided Design and Applications, Vol. 4 No. 5, pp. 585–594. https://doi.org/10.1080/16864360.2007.10738493.CrossRefGoogle Scholar
Rosen, D.W. (2014), “Research supporting principles for design for additive manufacturing”, Virtual and Physical Prototyping, Vol. 9 No. 4, pp. 225–232. https://doi.org/10.1080/17452759.2014.951530.CrossRefGoogle Scholar
Rudolph, J.-P. and Emmelmann, C. (2017), “Analysis of Design Guidelines for Automated Order Acceptance in Additive Manufacturing”, 27th CIRP Design Conference, Cranfield University, UK, May 12-12, 2017, Elsevier B.V., pp. 187–192. https://doi.org/10.1016/j.procir.2017.01.027.Google Scholar
Salmi, A., Calignano, F., Galati, M. and Atzeni, E. (2018), “An integrated design methodology for components produced by laser powder bed fusion (L-PBF) process”, Virtual and Physical Prototyping, Vol. 13 No. 3, pp. 191–202. https://doi.org/10.1080/17452759.2018.1442229.CrossRefGoogle Scholar
Seepersad, C.C., Govett, T., Kim, K., Lundin, M. and Pinero, D. (2012), “A Designer's Guide for Dimensioning and Tolerancing SLS Parts”, 23rd Annual International Solid Freeform Fabrication Symposium, Austin, TX, August 6-8, 2012, University of Texas, Austin, TX, pp. 921–931.Google Scholar
Song, C., Yang, Y., Ye, Z. and Di Wang, (2013), “Digital design and direct manufacturing of non-assembly mechanisms by selective laser melting”, International Symposium on Assembly and Manufacturing (ISAM 2013), Xi'an, China, July 30-August 2, 2013, pp. 142–144. https://doi.org/10.1109/ISAM.2013.6643511.CrossRefGoogle Scholar
Steuben, J., van Bossuyt, D.L. and Turner, C. (2015), “Design for Fused Filament Fabrication Additive Manufacturing”, International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC/CIE2015), Boston, MA, August 2-5, 2015, ASME, New York. https://doi.org/10.1115/DETC2015-46355.Google Scholar
Stöckli, F.R., Modica, F. and Shea, K. (2016), “Designing passive dynamic walking robots for additive manufacture”, Rapid Prototyping Journal, Vol. 22 No. 5, pp. 842–847. https://doi.org/10.1108/RPJ-11-2015-0170.CrossRefGoogle Scholar
Stolt, R., Elgh, F. and Heikkinen, T. (2019), “Design and Evaluation of Aerospace Components for SLM”, 26th International Conference on Transdisciplinary Engineering (TE2019), Tokyo, Japan, July 30 - August 1, 2019, IOS Press BV, Amsterdam, Netherlands, pp. 157–166. https://doi.org/10.3233/ATDE190119.Google Scholar
Su, X., Yang, Y., Di, Wang and Chen, Y. (2013), “Digital assembly and direct fabrication of mechanism based on selective laser melting”, Rapid Prototyping Journal, Vol. 19 No. 3, pp. 166–172. https://doi.org/10.1108/13552541311312157.CrossRefGoogle Scholar
Thompson, M.K., Moroni, G., Vaneker, T., Fadel, G., Campbell, R.I., Gibson, I., Bernard, A., Schulz, J., Graf, P., Ahuja, B. and Martina, F. (2016), “Design for Additive Manufacturing: Trends, opportunities, considerations, and constraints”, CIRP Annals - Manufacturing Technology, Vol. 65 No. 2, pp. 737–760. https://doi.org/10.1016/j.cirp.2016.05.004.CrossRefGoogle Scholar
Tsirogiannis, E. and Vosniakos, G.-C. (2019), “Redesign and Topology Optimization of an Industrial Robot Link for Additive Manufacturing”, Facta Universitatis - Mechanical Engineering, Vol. 17 No. 3, pp. 415–424. https://doi.org/10.22190/FUME181219003T.CrossRefGoogle Scholar
Türk, D.-A., Kussmaul, R., Zogg, M., Klahn, C., Leutenecker-Twelsiek, B. and Meboldt, M. (2017), “Composites Part Production with Additive Manufacturing Technologies”, 1st CIRP Conference on Composite Materials Parts Manufacturing (CIRP CCMPM 2017), Karlsruhe, Germany, June 8-9, 2017, Elsevier B.V., Amsterdam, pp. 306–311. https://doi.org/10.1016/j.procir.2017.03.359.Google Scholar
Valjak, F. and Bojčetić, N. (2019), “Conception of Design Principles for Additive Manufacturing”, 22nd International Conference on Engineering Design (ICED19), Delft, Netherlands, August 5-8, 2019, pp. 689–698. https://doi.org/10.1017/dsi.2019.73.CrossRefGoogle Scholar
Verein Deutscher Ingenieure (1993), Systematic approach to the development and design of technical systems and products, VDI 2221:1993, Beuth Verlag, Berlin.Google Scholar
Verein Deutscher Ingenieure (2014), Additive manufacturing processes, rapid manufacturing: Basics, definitions, processes, VDI 3405:2014, Beuth Verlag, Berlin.Google Scholar
Watschke, H., Kuschmitz, S., Heubach, J., Lehne, G. and Vietor, T. (2019), “A Methodical Approach to Support Conceptual Design for Multi-Material Additive Manufacturing”, 22nd International Conference on Engineering Design (ICED19), Delft, Netherlands, August 5-8, 2019, pp. 659–668. https://doi.org/10.1017/dsi.2019.70.CrossRefGoogle Scholar
Weiss, F. (2019), Untersuchung des Entwicklungsprozesses für additiv gefertigte Bauteile mittels Bereitstellung einer elementaren Informationsstruktur, Dissertation, University of Stuttgart, Stuttgart.Google Scholar
Wits, W.W., Weitkamp, S.J. and Es, J. van (2013), “Metal additive manufacturing of a high-pressure micro-pump”, 46th CIRP Conference on Manufacturing Systems (CIRP CMS 2013), Setúbal, Portugal, May 29-30, 2013, Elsevier B.V., Amsterdam, Netherlands, pp. 252–257. https://doi.org/10.1016/j.procir.2013.05.043.Google Scholar
Yang, S. and Zhao, Y.F. (2015), “Additive manufacturing-enabled design theory and methodology: a critical review”, The International Journal of Advanced Manufacturing Technology, Vol. 80, pp. 327–342. https://doi.org/10.1007/s00170-015-6994-5.CrossRefGoogle Scholar
Zhang, Y., Bernard, A., Gupta, R.K. and Harik, R. (2014), “Evaluating the Design for Additive Manufacturing: A Process Planning Perspective”, 24th CIRP Design Conference, Milano, April 14-16, 2014, Elsevier B.V., pp. 144–150. https://doi.org/10.1016/j.procir.2014.03.179.Google Scholar
Zhu, Z., Pradel, P., Bibb, R. and Moultrie, J. (2017), “A Framework for Designing End Use Products for Direct Manufacturing Using Additive Manufacturing Technologies”, 21st International Conference on Engineering Design, Vancouver, August 21-25, 2017, pp. 327–336.Google Scholar