Hostname: page-component-586b7cd67f-gb8f7 Total loading time: 0 Render date: 2024-11-22T22:46:14.223Z Has data issue: false hasContentIssue false
  • English
  • Français

ADDITIVE MANUFACTURING RESEARCH LANDSCAPE: A LITERATURE REVIEW

Published online by Cambridge University Press:  27 July 2021

Pascal Schmitt ,
Stefan Zorn  and
Kilian Gericke
Pascal Schmitt*
Affiliation:
University of Rostock
Stefan Zorn
Affiliation:
University of Rostock
Kilian Gericke
Affiliation:
University of Rostock
*
Schmitt, Pascal, University of Rostock, Faculty of Mechanical Engineering and Marine Technology, Germany, [email protected]

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the ‘Save PDF’ action button.

Additive manufacturing offers several potentials such as the freedom of design, part consolidation, function integration, or time and cost-savings. These potentials make AM interesting for industries such as aerospace, automotive and medical implants, and are also seen as enables for the creation of entirely new business models. Additive manufacturing has the potential to change the current manufacturing landscape substantially and has attracted much attention of industry and academia over the last decades.

However, these developments require improvements concerning the technology itself and its successful implementation into the value creation chain. Driven by the promising market opportunities and upcoming technological developments, many research activities started.

This paper presents a literature review of publications from the last 20 years. Based on this analysis, the evolution of the AM research landscape is portrayed. The research landscape is organised into four areas: machine and process, material, digital process chain and methodology. The paper summarises developments in each of these areas and concludes by presenting current and discussing future research topics.

Keywords

Additive ManufacturingDesign for Additive Manufacturing (DfAM)3D printing
Type
Article
Information
Proceedings of the Design Society , Volume 1: ICED21 , August 2021 , pp. 333 - 344
Creative Commons
Creative Common License - CCCreative Common License - BYCreative Common License - NCCreative Common License - ND
This is an Open Access article, distributed under the terms of the Creative Commons Attribution-NonCommercial-NoDerivatives licence (http://creativecommons.org/licenses/by-nc-nd/4.0/), which permits non-commercial re-use, distribution, and reproduction in any medium, provided the original work is unaltered and is properly cited. The written permission of Cambridge University Press must be obtained for commercial re-use or in order to create a derivative work.
Copyright
The Author(s), 2021. Published by Cambridge University Press

References

Abdulhameed, O., Al-Ahmari, A., Ameen, W. and Mian, S. H. (2019) ‘Additive manufacturing: Challenges, trends, and applications’, Advances in Mechanical Engineering, SAGE Publications Inc., 11(2). https://dx.doi.org/10.1177/1687814018822880.Google Scholar
Allison, A. and Scudamore, R. (2013) Additive Manufacturing: Strategic Research Agenda.Google Scholar
AMFG (2020) The Additive Manufacturing Landscape 2020 Table of Contents.Google Scholar
Anderson, C. (2012) Makers: The New Industrial Revolution. Crown Business.Google Scholar
ASTM International (2012) ASTM F2792 - 12a Standard Terminology for Additive Manufacturing Technologies. West Conshohocken, PA.Google Scholar
ASTM International (2017) DIN EN ISO/ASTM 52900. Additive manufacturing - General principles - TerminologyGoogle Scholar
Attaran, M. (2020) ‘Digital technology enablers and their implications for supply chain management’, Supply Chain Forum. Taylor and Francis Ltd., pp. 158–172. https://dx.doi.org/10.1080/16258312.2020.1751568.Google Scholar
Beaman, J. J., Atwood, C., Bergman, T. L., Bourell, D., Hollister, S. and Rosen, D. (2004) WTEC Panel Report on Additive/Subtractive Manufacturing Research and Development in Europe. Baltimore.CrossRefGoogle Scholar
Blösch-Paidosh, A. and Shea, K. (2019) ‘Design Heuristics for Additive Manufacturing Validated Through a User Study1’, Journal of Mechanical Design, Transactions of the ASME. American Society of Mechanical Engineers (ASME), 141(4). https://dx.doi.org/10.1115/1.4041051.Google Scholar
Borgue, O., Muller, J., Panarotto, M. and Isaksson, O. (2018) Function modelling and constraints replacement to support design for additive manufacturing of satellite components, Proceedings of NordDesign: Design in the Era of Digitalization, 2018CrossRefGoogle Scholar
Bourell, D. L., Leu, M. C. and Rosen, D. W. (2009) Roadmap for Additive Manufacturing Identifying the Future of Freeform Processing. Austin.Google Scholar
Ceulemans, J., Ménière, Y., Nichogiannopoulou, A., Rodríguez, J. P., Rudyk, I. (2020) ‘Patents and additive manufacturing’, European Patent Office.Google Scholar
Charles, A., Salem, M., Moshiri, M., Elkaseer, A. and Scholz, S. G. (2021) ‘In-process digital monitoring of additive manufacturing: Proposed machine learning approach and potential implications on sustainability’, in Smart Innovation, Systems and Technologies. Springer, pp. 297–306. https://dx.doi.org/10.1007/978-981-15-8131-1_27.Google Scholar
Chen, F., Zabalza, J., Murray, P., Marshall, S., Yu, J. and Gupta, N. (2020) ‘Embedded product authentication codes in additive manufactured parts: Imaging and image processing for improved scan ability’, Additive Manufacturing. Elsevier BV, 35. https://dx.doi.org/10.1016/j.addma.2020.101319.Google ScholarPubMed
Colorado, H. A., Velásquez, E. I. G. and Monteiro, S. N. (2020) ‘Sustainability of additive manufacturing: the circular economy of materials and environmental perspectives’, Journal of Materials Research and Technology, 9(4), pp. 8221–8234. https://dx.doi.org/10.1016/j.jmrt.2020.04.062.LevyCrossRefGoogle Scholar
Dalpadulo, E., Pini, F. and Leali, F. (2020) ‘Integrated CAD platform approach for Design for Additive Manufacturing of high performance automotive components’, International Journal on Interactive Design and Manufacturing. Springer, 14(3), pp. 899–909. https://dx.doi.org/10.1007/s12008-020-00684-7.CrossRefGoogle Scholar
Dietemann, B., Bosna, F., Lorenz, M., Travitzky, N., Kruggel-Emden, H., Kraft, T. and Bierwisch, C. (2020) ‘Modeling robocasting with smoothed particle hydrodynamics: Printing gap-spanning filaments’, Additive Manufacturing. Elsevier BV, 36. https://dx.doi.org/10.1016/j.addma.2020.101488.Google Scholar
Dohale, V., Akarte, M., Gupta, S. and Verma, V. (2021) ‘Additive Manufacturing Process Selection Using MCDM’, in Lecture Notes in Mechanical Engineering. Springer, pp. 601–609. https://dx.doi.org/10.1007/978-981-15-3639-7_72.Google Scholar
Dordlofva, C. and Törlind, P. (2020) ‘Evaluating design uncertainties in additive manufacturing using design artefacts: Examples from space industry’, Design Science. Cambridge University Press, 6. https://dx.doi.org/10.1017/dsj.2020.11.Google Scholar
Doubrovski, Z., Verlinden, J. C. and Geraedts, J. M. P. (2011) ‘Optimal design for additive manufacturing: Opportunities and challenges’, in Proceedings of the ASME Design Engineering Technical Conference, pp. 635–646. https://dx.doi.org/10.1115/DETC2011-48131.CrossRefGoogle Scholar
Durakovic, B. (2018) ‘Design for additive manufacturing: Benefits, trends and challenges’, Periodicals of Engineering and Natural Sciences. International University of Sarajevo, 6(2), pp. 179–191. https://dx.doi.org/10.21533/pen.v6i2.224.CrossRefGoogle Scholar
Ehrenberg, N. (2013) From Powders to Finished Parts. Available at: http://www.siemens.com/innovation/apps/pof_microsite/_pof-spring-2013/_html_en/laser-melting.html.Google Scholar
Ernst & Young Global Limited (2019) ‘3D printing: hype or game changer? - A Global EY Report 2019’, p. 64.Google Scholar
François, M., Segonds, F., Rivette, M., Turpault, S. and Peyre, P. (2019) ‘Design for additive manufacturing (DfAM) methodologies: a proposal to foster the design of microwave waveguide components’, Virtual and Physical Prototyping. Taylor and Francis Ltd., 14(2), pp. 175–187. https://dx.doi.org/10.1080/17452759.2018.1549901.CrossRefGoogle Scholar
Gausemeier, J., Echterhoff, N., Kokoschka, M. and Wall, M. (2011) Thinking ahead the Future of Additive Manufacturing – Analysis of Promising Industries. Paderborn.Google Scholar
Gebhardt, A. (2011) Generative Fertigungsverfahren. München: Carl Hanser Verlag. https://dx.doi.org/10.3139/9783446436527.Google Scholar
Gebhardt, A. and Hötter, J.-S. (2016) Additive Manufacturing: 3D Printing for Prototyping and Manufacturing, Carl Hanser Verlag. ISBN 9783446452367CrossRefGoogle Scholar
Gericke, K., Eckert, C. and Stacey, M. (2017) ‘What do we need to say about a design method?’, in Proceedings of the International Conference on Engineering Design, ICED. The Design Society, Glasgow.Google Scholar
Gibson, I., Rosen, D. and Stucker, B. (2015) Additive manufacturing technologies: 3D printing, rapid prototyping, and direct digital manufacturing, second edition, Additive Manufacturing Technologies: 3D Printing, Rapid Prototyping, and Direct Digital Manufacturing, Second Edition. Springer New York. https://dx.doi.org/10.1007/978-1-4939-2113-3.CrossRefGoogle Scholar
Goh, G. D., Dikshit, V., Nagalingam, A. P., Goh, G. L., Agarwala, S., Sing, S. L., Wei, J. and Yeong, W. Y. (2018) ‘Characterisation of mechanical properties and fracture mode of additively manufactured carbon fibre and glass fibre reinforced thermoplastics’, Materials & Design, 137, pp. 79–89. https://dx.doi.org/10.1016/j.matdes.2017.10.021.CrossRefGoogle Scholar
Gorn, M., Cerwenka, G., Gralow, M. and Emmelmann, C. (2019) ‘Industrial 3D printing for modern machine and handling systems—Potential and solutions’, Journal of Laser Applications. Laser Institute of America, 31(2), p. 022309. https://dx.doi.org/10.2351/1.5096098.CrossRefGoogle Scholar
Haleem, A. and Javaid, M. (2019) ‘Polyether ether ketone (PEEK) and its manufacturing of customised 3D printed dentistry parts using additive manufacturing’, Clinical Epidemiology and Global Health, 7(4), pp. 654–660. https://dx.doi.org/10.1016/j.cegh.2019.03.001.CrossRefGoogle Scholar
Hällgren, S., Pejryd, L. and Ekengren, J. (2016) ‘(Re)Design for Additive Manufacturing’, in Procedia CIRP. Elsevier BV, pp. 246–251. https://dx.doi.org/10.1016/j.procir.2016.04.150.Google Scholar
Haney, R., Tran, P., Trigg, E. B., Koerner, H., Dickens, T. and Ramakrishnan, S. (2020) ‘Printability and performance of 3D conductive graphite structures’, Additive Manufacturing, Elsevier B.V. https://dx.doi.org/10.1016/j.addma.2020.101618.Google Scholar
Van Heerden, A., Grobbelaar, S. S. and Sacks, N. (2020) ‘The impact of digitalisation and additive manufacturing on business models and value chains: A scoping review’, in Towards the Digital World and Industry X.0 - Proceedings of the 29th International Conference of the International Association for Management of Technology, IAMOT 2020. University of Pretoria, pp. 1292–1309.Google Scholar
Heikkinen, T., Johansson, J. and Elgh, F. (2018) ‘Review of CAD-model capabilities and restrictions for multidisciplinary use’, Computer-Aided Design and Applications. CAD Solutions, LLC, 15(4), pp. 509–519. https://dx.doi.org/10.1080/16864360.2017.1419639.CrossRefGoogle Scholar
Hinchy, E. P. (2019) ‘Design for Additive Manufacturing’, in Polymer-Based Additive Manufacturing. Cham: Springer International Publishing, pp. 23–50. https://dx.doi.org/10.1007/978-3-030-24532-0_2.CrossRefGoogle Scholar
Kessler, A., Hickel, R. and Reymus, M. (2020) ‘3D printing in dentistry-state of the art’, Operative Dentistry, 45(1), pp. 30–40. https://dx.doi.org/10.2341/18-229-L.CrossRefGoogle ScholarPubMed
Kuang, X., Roach, D. J., Wu, J., Hamel, C. M., Ding, Z., Wang, T., Dunn, M. L. and Qi, H. J. (2019) ‘Advances in 4D Printing: Materials and Applications’, Advanced Functional Materials, 29(2), p. 1805290. https://dx.doi.org/10.1002/adfm.201805290.CrossRefGoogle Scholar
Kussmaul, R., Biedermann, M., Pappas, G. A., Jónasson, J. G., Winiger, P., Zogg, M., Türk, D.-A., Meboldt, M. and Ermanni, P. (2019) ‘Individualised lightweight structures for biomedical applications using additive manufacturing and carbon fibre patched composites’, Design Science, 5, p. e20. https://dx.doi.org/10.1017/dsj.2019.19.CrossRefGoogle Scholar
Lauff, C. A., Blake Perez, K., Camburn, B. A. and Wood, K. L. (2019) ‘Design principle cards: Toolset to support innovations with additive manufacturing’, in Proceedings of the ASME Design Engineering Technical Conference. American Society of Mechanical Engineers (ASME). https://dx.doi.org/10.1115/DETC2019-97231.CrossRefGoogle Scholar
Laverne, F., Segonds, F., Anwer, N. and Le Coq, M. (2015) ‘Assembly based methods to support product innovation in design for additive manufacturing: An exploratory case study’, Journal of Mechanical Design, Transactions of the ASME. American Society of Mechanical Engineers (ASME), 137(12). https://dx.doi.org/10.1115/1.4031589.Google Scholar
Loh, G. H., Pei, E., Harrison, D. and Monzón, M. D. (2018) ‘An overview of functionally graded additive manufacturing’, Additive Manufacturing, 23, pp. 34–44. https://dx.doi.org/10.1016/j.addma.2018.06.023.CrossRefGoogle Scholar
Lowke, D., Dini, E., Perrot, A., Weger, D., Gehlen, C. and Dillenburger, B. (2018) ‘Particle-bed 3D printing in concrete construction – Possibilities and challenges’, Cement and Concrete Research, 112, pp. 50–65. https://dx.doi.org/10.1016/j.cemconres.2018.05.018.CrossRefGoogle Scholar
Machado, C. G., Despeisse, M., Winroth, M. and da Silva, E. H. D. R. (2019) ‘Additive manufacturing from the sustainability perspective: proposal for a self-assessment tool’, Procedia CIRP, 81, pp. 482–487. https://dx.doi.org/10.1016/j.procir.2019.03.123.CrossRefGoogle Scholar
Mahan, T., Stover, M., Arguelles, A. and Menold, J. (2020) ‘Creating a Design for Inspectability Framework: Investigating DfAM Heuristics for Inspection Technologies’, in ASME International. https://dx.doi.org/10.1115/detc2020-22601.CrossRefGoogle Scholar
Marinov, M., Amagliani, M., Barback, T., Flower, J., Barley, S., Furuta, S., Charrot, P., Henley, I., Santhanam, N., Finnigan, G. T., Meshkat, S., Hallet, J., Sapun, M. and Wolski, P. (2019) ‘Generative Design Conversion to Editable and Watertight Boundary Representation’, CAD Computer Aided Design. Elsevier Ltd, 115, pp. 194–205. https://dx.doi.org/10.1016/j.cad.2019.05.016.Google Scholar
Markets&Markets (2019) 2020 Additive Manufacturing Market Outlook and Summary of Opportunities.Google Scholar
Meisel, N. A., Williams, C. B., Ellis, K. P. and Taylor, D. (2016) ‘Decision support for additive manufacturing deployment in remote or austere environments’, Journal of Manufacturing Technology Management. Emerald Group Publishing Ltd., 27(7), pp. 898–914. https://dx.doi.org/10.1108/JMTM-06-2015-0040.CrossRefGoogle Scholar
Moritzer, E., Hirsch, A. and Bürenhaus, F. (2019) ‘Development and modelling of design and process guidelines for FDM structures for the partial reinforcement of hybrid structures’, in AIP Conference Proceedings. American Institute of Physics Inc. https://dx.doi.org/10.1063/1.5088314.CrossRefGoogle Scholar
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q. and Hui, D. (2018) ‘Additive manufacturing (3D printing): A review of materials, methods, applications and challenges’, Composites Part B: Engineering. Elsevier Ltd, pp. 172–196. https://dx.doi.org/10.1016/j.compositesb.2018.02.012.Google Scholar
Palanikumar, K., Mudhukrishnan, M., Soorya Prabha, P. (2020) ‘Technologies in additive manufacturing for fibre reinforced composite materials: a review’, Current Opinion in Chemical Engineering, 28, pp. 51–59. https://dx.doi.org/10.1016/j.coche.2020.01.001.Google Scholar
Parthasarathy, J., Starly, B. and Raman, S. (2011) ‘A design for the additive manufacture of functionally graded porous structures with tailored mechanical properties for biomedical applications’, Journal of Manufacturing Processes. Elsevier Ltd, 13(2), pp. 160–170. https://dx.doi.org/10.1016/j.jmapro.2011.01.004.CrossRefGoogle Scholar
Piticescu, R., Vlaicu, I., Katz-Demyanetz, A., Popov, V. V., Kovalevsky, A., Safranchik, D. and Koptyug, A. (2019) ‘Powder-bed additive manufacturing for aerospace application: Techniques, metallic and metal/ceramic composite materials and trends’, Manufacturing Review, 6. https://dx.doi.org/10.1051/mfreview/2019003.Google Scholar
Ponche, R., Hascoet, J. Y., Kerbrat, O. and Mognol, P. (2012) ‘A new global approach to design for additive manufacturing’, Virtual and Physical Prototyping, 7(2), pp. 93–105. https://dx.doi.org/10.1080/17452759.2012.679499.CrossRefGoogle Scholar
Pradel, P., Zhu, Z., Bibb, R. and Moultrie, J. (2018) ‘A framework for mapping design for additive manufacturing knowledge for industrial and product design’, Journal of Engineering Design, 29(6), pp. 291–326. https://dx.doi.org/10.1080/09544828.2018.1483011.CrossRefGoogle Scholar
Puppi, D. and Chiellini, F. (2020) ‘Biodegradable Polymers for Biomedical Additive Manufacturing’, Applied Materialstoday, 20. https://dx.doi.org/10.1016/j.apmt.2020.100700.Google Scholar
Qin, Y. and Wen, P. (2019) ‘Additive manufacturing of biodegradable metals: Current research status and future perspectives’, Acta Biomaterialia, 98. https://dx.doi.org/10.1016/j.actbio.2019.04.046.CrossRefGoogle ScholarPubMed
Reiher, T., Vogelsang, S. and Koch, R. (2020) ‘Computer integration for geometry generation for product optimisation with Additive Manufacturing’, in Solid Freeform Fabrication 2017: Proceedings of the 28th Annual International Solid Freeform Fabrication Symposium - An Additive Manufacturing Conference, SFF 2017. The University of Texas at Austin, pp. 903–921.Google Scholar
RepRap, (2013). Available at: http://reprap.org/.Google Scholar
Royal Academy of Engineering (2013) Additive manufacturing: opportunities and constraints. London.Google Scholar
Ryan, K. R., Down, M. P. and Banks, C. E. (2021) ‘Future of additive manufacturing: Overview of 4D and 3D printed smart and advanced materials and their applications’, Chemical Engineering Journal. Elsevier B.V. https://dx.doi.org/10.1016/j.cej.2020.126162.Google Scholar
Salcedo, E., Baek, D., Berndt, A. and Ryu, J. E. (2018) ‘Simulation and validation of three-dimension functionally graded materials by material jetting’, Additive Manufacturing, 22, pp. 351–359. https://dx.doi.org/10.1016/j.addma.2018.05.027.CrossRefGoogle Scholar
Schmidt, K. and Zimmermann, A. (2020) ‘Evaluation of process and anisotropy of thermosetting adhesives with ultraviolet-assisted 3D dispensing’, Additive Manufacturing. Elsevier BV, 34. https://dx.doi.org/10.1016/j.addma.2020.101262.Google Scholar
Sculpteo (2020) The state of 3D Printing.Google Scholar
Senvol Database, S. (2020) Senvol Material Database.Google Scholar
Tan, L. J., Zhu, W. and Zhou, K. (2020) ‘Recent Progress on Polymer Materials for Additive Manufacturing’, Advanced Functional Materials, 30(43), p. 2003062. https://dx.doi.org/10.1002/adfm.202003062.CrossRefGoogle Scholar
Tao, R., Xi, L., Wu, W., Li, Y., Liao, B., Liu, L., Leng, J. and Fang, D. (2020) ‘4D printed multi-stable metamaterials with mechanically tunable performance’, Composite Structures. -Elsevier Ltd., 252. https://dx.doi.org/10.1016/j.compstruct.2020.112663.Google Scholar
Tofail, S. A. M., Koumoulos, E. P., Bandyopadhyay, A., Bose, S., O'Donoghue, L. and Charitidis, C. (2018) ‘Additive manufacturing: scientific and technological challenges, market uptake and opportunities’, Materials Today, 21(1), pp. 22–37. https://dx.doi.org/10.1016/j.mattod.2017.07.001.CrossRefGoogle Scholar
Tyflopoulos, E., Flem, D. T., Steinert, M. and Olsen, A. (2018) ‘State of the art of generative design and topology optimisation and potential research needs’, in Proceedings of NordDesign: Design in the Era of Digitalization, NordDesign 2018. -The Design Society.Google Scholar
Valdes, Y. M. I. R. J. (2017) ‘Patents and the Fourth Industrial Revolution (EPO)’, European Patent Office, Handelsblatt Research Institute, (December), p. 100.Google Scholar
Valjak, F. and Bojčetić, N. (2019) ‘Conception of design principles for additive manufacturing’, in Proceedings of the International Conference on Engineering Design, ICED. Cambridge University Press, pp. 689–698. https://dx.doi.org/10.1017/dsi.2019.73.CrossRefGoogle Scholar
Vaneker, T., Bernard, A., Moroni, G., Gibson, I. and Zhang, Y. (2020) ‘Design for additive manufacturing: Framework and methodology’, CIRP Annals. Elsevier USA, 69(2), pp. 578–599. https://dx.doi.org/10.1016/j.cirp.2020.05.006.CrossRefGoogle Scholar
De Vere, I. (2013) ‘Industrial design 2.0: a renaissance’, in Lawlor, J., Reilly, G., Simpson, R., Ring, M., Kovacevic, A., McGrath, M., Ion, W., Torney, D., Bohemia, E., McMahon, C., and Parkinson, B. (eds) Proceedings of International Conference on Engineering and Product Design Education. Dublin: The Design Society, Glasgow, pp. 824–829.Google Scholar
Wiberg, A., Persson, J. and Ölvander, J. (2019) ‘Design for additive manufacturing – a review of available design methods and software’, Rapid Prototyping Journal. Emerald Group Publishing Ltd., pp. 1080–1094. https://dx.doi.org/10.1108/RPJ-10-2018-0262.Google Scholar
Wortmann, N., Jürgenhake, C., Seidenberg, T., Dumitrescu, R. and Krause, D. (2019) ‘Methodical approach for process selection in additive manufacturing’, in Proceedings of the International Conference on Engineering Design, ICED. Cambridge University Press, pp. 779–788. https://dx.doi.org/10.1017/dsi.2019.82.CrossRefGoogle Scholar
Xiong, J., Zhang, G. and Zhang, W. (2015) ‘Forming appearance analysis in multi-layer single-pass GMAW-based additive manufacturing’, International Journal of Advanced Manufacturing Technology. Springer London, 80(9-12), pp. 1767–1776. https://dx.doi.org/10.1007/s00170-015-7112-4.CrossRefGoogle Scholar
Yang, S., Tang, Y. and Zhao, Y. F. (2015) ‘A new part consolidation method to embrace the design freedom of additive manufacturing’, Journal of Manufacturing Processes. Elsevier Ltd, 20, pp. 444–449. https://dx.doi.org/10.1016/j.jmapro.2015.06.024.CrossRefGoogle Scholar
Zhang, B., Jaiswal, P., Rai, R. and Nelaturi, S. (2018) ‘Additive Manufacturing of Functionally Graded Material Objects: A Review’, Journal of Computing and Information Science in Engineering, 18(4). https://dx.doi.org/10.1115/1.4039683.CrossRefGoogle Scholar