Hostname: page-component-586b7cd67f-t7fkt Total loading time: 0 Render date: 2024-11-22T14:16:41.222Z Has data issue: false hasContentIssue false
  • English
  • Français

DESIGN TOOL TO DEVELOP HIGHLY EFFICIENT OPTOMECHATRONIC SYSTEMS

Part of: Design Support Tools

Published online by Cambridge University Press:  11 June 2020

P.-P. Ley ,
J. August  and
R. Lachmayer
P.-P. Ley*
Affiliation:
Leibniz Universität Hannover, Germany
J. August
Affiliation:
Leibniz Universität Hannover, Germany
R. Lachmayer
Affiliation:
Leibniz Universität Hannover, Germany
*
*[email protected]

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the ‘Save PDF’ action button.

In the domain of optical engineering, optomechatronic systems are predominantly developed using conventional ray tracing methods such as sequential and non-sequential ray tracing. However, the increasing complexity of these systems in combination with the demand for high efficiency and high image quality leads to the fact that conventional methods to develop these systems reach their limits. In order to be able to develop highly efficient systems with high image quality, this contribution introduces a hybrid ray tracing method using an advanced optimization function.

Keywords

numerical methodsdesign optimisationdesign toolsinnovation
Type
Article
Information
Proceedings of the Design Society: DESIGN Conference , Volume 1 , May 2020 , pp. 305 - 314
Creative Commons
Creative Common License - CCCreative Common License - BYCreative Common License - NCCreative Common License - ND
This is an Open Access article, distributed under the terms of the Creative Commons Attribution-NonCommercial-NoDerivatives licence (http://creativecommons.org/licenses/by-nc-nd/4.0/), which permits non-commercial re-use, distribution, and reproduction in any medium, provided the original work is unaltered and is properly cited. The written permission of Cambridge University Press must be obtained for commercial re-use or in order to create a derivative work.
Copyright
The Author(s), 2020. Published by Cambridge University Press

References

Bobey, K. (2005), “Optoelektronik-Komponenten”, In: Litfin, G. (Ed.), Technische Optik in der Praxis, Springer Vieweg, Berlin, Heidelberg, pp. 179–208. https://doi.org/10.1007/3-540-26709-3_7CrossRefGoogle Scholar
Bonenberger, T.S. (2016), LED Farbmischung mit chaotischen Lichtleitern, [PhD Thesis], Karlsruhe Institute of Technology. https://doi.org/10.5445/IR/1000051858CrossRefGoogle Scholar
Cho, H. (2003), “Characteristics of Opto-Mechatronik Systems”, In: Cho, H. (Ed.), Opto-Mechatronic Systems Handbook, CRC Press LLC, Boca Raton, pp. 17–53. https://doi.org/10.1201/9781420040692Google Scholar
Flores-Hernández, R. and Gómez-Vieyra, A. (2017), “Ray Tracing”, In: Malacara Hernández, D. (Ed.), Fundamentals and Basic Optical Instruments, CRC Press LLC, Boca Raton, pp. 119–164. https://doi.org/10.1201/9781315119984CrossRefGoogle Scholar
Gräßler, I. (2017), “A new V-Model for Interdisciplinary Product Engineering”, In 59th ILMENAU Scientific Colloquium, Technische Universität Ilmenau, 11-15 September 2017. https://nbn-resolving.org/urn:nbn:de:gbv:ilm1-2017iwk-063:6Google Scholar
Gräßler, I., Hentze, J and Bruckmann, T. (2018), “V-Models for Interdisciplinary Systems Engineering”, in Proceedings of the DESIGN 2018 15th International Design Conference, Dubrovnik, Croatia, 21-24 May 2018. https://doi.org/10.21278/idc.2018.0333CrossRefGoogle Scholar
Hering, E. and Martin, R. (2006), “Beleuchtungstechnik”, In: Hering, E. and Martin, R. (Ed.), Photonik: Grundlagen, Technologie und Anwendung, Springer Vieweg, Berlin, Heidelberg, pp. 317–349. https://doi.org/10.1007/3-540-29708-1_7CrossRefGoogle Scholar
Knöchelmann, M. et al. (2019a), “High-resolution headlamps – technology analysis and system design”, Advanced Optical Technologies, Vol. 8 No. 1, pp. 33–46. https://doi.org/10.1515/aot-2018-0060CrossRefGoogle Scholar
Knöchelmann, M. et al. (2019b), “Methodische Entwicklung eines opto-mechatronischen Systems am Beispiel eines hochadaptiven Fahrzeugscheinwerfers”, Tagungsband der VDI Fachtagung Mechatronik 2019, Paderborn, Deutschland, März 27-28, 2019, pp. 7–12. https://doi.org/10.15488/4683CrossRefGoogle Scholar
Knöchelmann, M. et al. (2018), “Aktiver Scheinwerfer mit DMD-Technologie zur Erzeugung vollständiger Lichtverteilungen”, VDI Berichte 2323 Optische Technologien in der Fahrzeuglichttechnik, Karlsruhe, Deutschland, Juni 5-6, 2018, pp. 61–78. https://doi.org/10.15488/3975CrossRefGoogle Scholar
Ley, P.-P. and Lachmayer, R. (2019), “Imaging and non-imaging illumination of DLP for high resolution headlamps”, in Proceedings of SPIE 10932, SPIE Photonics West, San Francisco, California, United States, February 1-7, 2019, https://doi.org/10.1117/12.2507436Google Scholar
Ley, P.-P. et al. (2018b), “Konzepte zur Beleuchtung von Lichtmodulatoren”, In DGaO-Proceedings, Aalen, Germany, 22-26 May 2018. https://doi.org/10.15488/4085CrossRefGoogle Scholar
Ley, P.-P. et al. (2019), “Development Methodology for Optomechatronic Systems Using the Example of a High-Resolution Projection Module”, in Proceedings of the 22nd International Conference on Engineering Design (ICED19), Delft, The Netherlands, 5-8 August 2019. https://doi.org/10.1017/dsi.2019.261CrossRefGoogle Scholar
Ley, P.-P., Wolf, A. and Lachmayer, R. (2018a), “Analysis of LED arrangement in an array with respect to lens geometry”, in Proceedings of SPIE 10554, SPIE Photonics West, San Francisco, California, United States, January 27 - February 1, 2018. https://doi.org/10.1117/12.2290253CrossRefGoogle Scholar
Martin, R. (2017), “Optoelektronik”, In: Hering, E., Bressler, K. and Gutekunst, J. (Eds.), Elektronik für Ingenieure und Naturwissenschaftler, Springer Vieweg, Berlin, Heidelberg, pp. 307–379. https://doi.org/10.1007/978-3-662-54214-9_6CrossRefGoogle Scholar
Michel, B., Kroneberger, M. and Hermann, R. (2012), Coupling ray tracers with custom software. [online] Photonik international 2012. Available at: https://www.hembach-photonik.de/de/publikationen/fachmagazine/ (accessed 19.10.2019).Google Scholar
Opti² Hybrid Raytracing (1.0.0) [Software]. (2019), https://doi.org/10.5281/zenodo.3248687CrossRefGoogle Scholar
Stolz, O. (2010), Differentielles Raytracing für spezielle Beleuchtungssysteme, [PhD Thesis], Friedrich-Alexander-University. urn:nbn:de:bvb:29-opus-16835Google Scholar
Texas Instruments (2010), Application Report DLPA022 - July 2010 DLP™ System Optics, Texas Instruments, Dallas, United States.Google Scholar
VDI 2206 (2004), VDI-Richtlinie 2206: Design methodology for mechatronic systems, Beuth Verlag, Berlin.Google Scholar
Wolf, A. and Lachmayer, R. (2016a), “Hybrid simulation of thermo-optical effects in laser-based white light sources”, in DGaO-Proceedings, Hannover, Germany, 17-21 May 2016. https://doi.org/10.15488/4057CrossRefGoogle Scholar
Wolf, A. et al. (2016b), “DMD Based Automotive Lighting Unit”, in DGaO-Proceedings, Hannover, Germany, 17-21 May 2016. https://doi.org/10.15488/4004CrossRefGoogle Scholar