Crossref Citations
This article has been cited by the following publications. This list is generated based on data provided by Crossref.
Welham, N. J.
and
Willis, P. E.
1998.
Formation of TiN/TiC-Fe composites from ilmenite (FeTiO3) concentrate.
Metallurgical and Materials Transactions B,
Vol. 29,
Issue. 5,
p.
1077.
Kerr, A.
Welhamab, N.J.
and
Willis, P.E.
1999.
Low temperature mechanochemical formation of titanium carbonitride.
Nanostructured Materials,
Vol. 11,
Issue. 2,
p.
233.
Welham, Nicholas J.
Willis, Paul E.
and
Kerr, Tony
2000.
Mechanochemical Formation of Metal–Ceramic Composites.
Journal of the American Ceramic Society,
Vol. 83,
Issue. 1,
p.
33.
Radhakrishnan, G
Adams, P.M
and
Speckman, D.M
2000.
Low temperature pulsed laser deposition of titanium carbide on bearing steels.
Thin Solid Films,
Vol. 358,
Issue. 1-2,
p.
131.
Hering, Nicole
Schreiber, Kai
Riedel, Ralf
Lichtenberger, Olaf
and
Woltersdorf, Jörg
2001.
Synthesis of polymeric precursors for the formation of nanocrystalline Ti‐C‐N/amorphous Si‐C‐N composites.
Applied Organometallic Chemistry,
Vol. 15,
Issue. 10,
p.
879.
Angerer, P.
Yu, L.G.
Khor, K.A.
Korb, G.
and
Zalite, I.
2005.
Spark-plasma-sintering (SPS) of nanostructured titanium carbonitride powders.
Journal of the European Ceramic Society,
Vol. 25,
Issue. 11,
p.
1919.
Pohrelyuk, Iryna
Yaskiv, Oleh
and
Fedirko, Viktor
2007.
Forming carbonitride coatings on titanium by thermochemical treatment with C-N-O-containing media.
JOM,
Vol. 59,
Issue. 6,
p.
32.
Biedunkiewicz, A.
Strzelczak, A.
Mozdzen, G.
and
Lelatko, J.
2008.
Non-isothermal oxidation of ceramic nanocomposites using the example of Ti–Si–C–N powder: Kinetic analysis method.
Acta Materialia,
Vol. 56,
Issue. 13,
p.
3132.
Yaskiv, O
Pohrelyuk, I
Lee, D-B
Fedirko, V
and
Guryn, S
2012.
Carbo-oxidising of titanium by diffusion treatment in carbon–oxygen containing media.
International Heat Treatment and Surface Engineering,
Vol. 6,
Issue. 2,
p.
72.
Silva, Cleiton Carvalho
Miranda, Hélio Cordeiro de
Motta, Marcelo Ferreira
Farias, Jesualdo Pereira
Afonso, Conrado Ramos Moreira
and
Ramirez, Antonio Jose
2013.
New insight on the solidification path of an alloy 625 weld overlay.
Journal of Materials Research and Technology,
Vol. 2,
Issue. 3,
p.
228.
Jiang, Bo
Ying, Nantao
Wang, Qiuyu
Xiao, Jiusan
Huang, Kai
Hou, Jungang
Zhu, Hongmin
and
Besmann, T.
2014.
Structural and Thermodynamics Properties of TiC1−xNx–TiO1−xNx Solid Solutions: X‐ray Diffraction and First‐Principles Approaches.
Journal of the American Ceramic Society,
Vol. 97,
Issue. 4,
p.
1288.
ARUGA, Atsushi
KISHIMURA, Hiroaki
OKAMOTO, Yoichi
and
MATSUMOTO, Hitoshi
2015.
Pressureless Sintered Titanium Carbonitride based ceramics and their Properties.
Journal of the Japan Society of Powder and Powder Metallurgy,
Vol. 62,
Issue. 4,
p.
144.
Tillmann, Wolfgang
and
Momeni, Soroush
2016.
Tribological development of TiCN coatings by adjusting the flowing rate of reactive gases.
Journal of Physics and Chemistry of Solids,
Vol. 90,
Issue. ,
p.
45.
Roca-Ayats, M.
Guillén-Villafuerte, O.
García, G.
Soler-Vicedo, M.
Pastor, E.
and
Martínez-Huerta, M.V.
2018.
PtSn nanoparticles supported on titanium carbonitride for the ethanol oxidation reaction.
Applied Catalysis B: Environmental,
Vol. 237,
Issue. ,
p.
382.
Konrad, Lukas
Zhao, Haishuang
Gspan, Christian
Rehr, John
Kolb, Ute
Lattemann, Martina
and
Kothleitner, Gerald
2018.
A consistent path for phase determination based on transmission electron microscopy techniques and supporting simulations.
Micron,
Vol. 115,
Issue. ,
p.
41.
Thompson, Forest C.
Kustas, Frank M.
and
Crawford, Grant A.
2019.
Influence of hexamethyldisilazane vapor on the structure and mechanical properties of TiC-based coatings.
Surface and Coatings Technology,
Vol. 374,
Issue. ,
p.
264.
Balestrat, Maxime
Lale, Abhijeet
Bezerra, André Vinícius Andrade
Proust, Vanessa
Awin, Eranezhuth Wasan
Machado, Ricardo Antonio Francisco
Carles, Pierre
Kumar, Ravi
Gervais, Christel
and
Bernard, Samuel
2020.
In-Situ Synthesis and Characterization of Nanocomposites in the Si-Ti-N and Si-Ti-C Systems.
Molecules,
Vol. 25,
Issue. 22,
p.
5236.
Oliveira, Lígia Gomes
Machado, Bruna
Pereira de Souza, Luana
Gosch Corrêa, Gean Carlo
Polinarski, Marcos Antonio
Cavalcanti Trevisan, Sérgio Vitor
Borba, Carlos Eduardo
Brackmann, Rodrigo
and
Alves, Helton José
2022.
Dry reforming of biogas in a pilot unit: Scale-up of catalyst synthesis and green hydrogen production.
International Journal of Hydrogen Energy,
Vol. 47,
Issue. 84,
p.
35608.
Gujral, Harpreet Singh
Fawaz, Mohammed
Joseph, Stalin
Sathish, CI
Singh, Gurwinder
Yu, Xiaojiang
Breese, Mark B. H.
Yi, Jiabao
Singh, Mandeep
Bansal, Vipul
Karakoti, Ajay
and
Vinu, Ajayan
2022.
Nanoporous TiCN with High Specific Surface Area for Enhanced Hydrogen Evolution Reaction.
ACS Applied Nano Materials,
Vol. 5,
Issue. 9,
p.
12077.
Campos Neto, Nelson Delfino
Kloenne, Zachary T.
Korenyi-Both, Andras L.
Midson, Stephen P.
and
Kaufman, Michael J.
2022.
Influence of Al/(Al+Cr) ratio and doping effects on wear and molten aluminum attack resistance in AlCrN-based PVD coatings for lube-free aluminum die casting.
Journal of Materials Research and Technology,
Vol. 20,
Issue. ,
p.
1057.