Photonic integration has proved remarkably successful in combining multiple optical devices onto a single chip with the benefits of added functionality, and reduction in costs, arising from the replacement of manual assembly and alignment of individual components with lithographic techniques. However, the incorporation of optical isolators and related non-reciprocal devices within standard optoelectronic wafer platforms is exceptionally challenging. Preferred magneto-optic materials cannot be exploited as waveguide core layers on semiconductor wafers due to a lower refractive index. Another difficulty is the phase velocity mismatch as a consequence of the inherent structural birefringence associated with waveguide geometries.

Our approach to the integration of an optical isolator with a III-V semiconductor laser involves combining a nonreciprocal mode converter with a reciprocal mode converter, based on an asymmetric profiled rib waveguide, fabricated by Reactive Ion Etching. We demonstrate that suitably tapered waveguides can be employed to connect the mode converter to other sections thereby avoiding problems caused by mode-matching and reflections from the section interfaces.

The nonreciprocal mode converter is formed from a continuation of the III-V semiconductor waveguide core with a magneto-optic upper cladding so that Faraday rotation occurs through the interaction of the evanescent tail. The phase velocity mismatch due to the waveguide birefringence is overcome using a quasi-phase-matching approach. Lithography is used to pattern the top cladding so that the film immediately on top of the waveguide core alternates between magnetooptic and a non-magneto-optic dielectric of a similar refractive index. Our first demonstrations used a dielectric (silica or silicon nitride) patterned by etching, or lift-off, on top of a GaAs rib waveguide, over which was deposited a magneto-optic film. This film was deposited by sputtering from a Ce:YIG target and demonstrated magnetic hysteresis, but, as it was not annealed, it was believed to consist of Ce:YIG and/or gamma iron oxide microcrystallites embedded in an amorphous matrix. With quasi-phase-matching periods of 110–160 μm and a waveguide length of 8 mm, we were able to demonstrate up to 12% non-reciprocal TE- to TM-mode conversion around a wavelength of 1.3 μm using the remanent magnetisation.

In order to enhance the magneto-optic effect it is desirable to anneal such films. However the mismatch in thermal expansion coefficients results in a catastrophic failure of samples with large area film coverage. This problem has been shown to be alleviated by patterning the YIG film. Unfortunately wet-etching of YIG also etches (Al)GaAs and, therefore, the development of a lift-off process for YIG deposition has been undertaken. Initial results are promising with ∼100 μm×2.5 μm YIG sections deposited on a GaAs layer which remain intact after an anneal in an oxygen atmosphere.

An optical isolator with a TiO2/(CeY)3Fe5O12 guiding layer was studied. A nonreciprocal phase shift was calculated in the magneto-optic waveguide with the TiO2/(CeY)3Fe5O12 guiding layer at a wavelength of 1.55 μm. By employing a multimode interference coupler as coupling devices, the total device length of approximately 600 μm was achieved. An interferometric optical isolator with distinct layer structures, which could be operated in a unidirectional magnetic field, was also designed.

Surface activated direct bonding of a magnetooptic garnet crystal to a Silicon-On-Insulator (SOI) wafer is discussed for the application to waveguide optical nonreciprocal devices. An interferometric waveguide isolator is discussed that uses nonreciprocal phase shift brought about by a first-order magneto-optic effect. In an SOI waveguide, the low refractive index of buried oxide layer enhances the magneto-optic phase shift. This contributes to reduce the device size together with the strong field confinement of high index contrast waveguide. The interferometric isolator can be extended to an optical circulator by adopting appropriate 3-dB directional couplers to construct a Mach-Zehnder interferometer.

We show that nonreciprocal Bloch-like oscillations can emerge in passive optical waveguide arrays with linearly growing effective index in the absence of loss or gain. Spectral asymmetry, a difference in propagation constants and Bloch oscillation periods in opposite propagation directions, are established by imposing different vertical spatial index gradients at the substrate/core, and core/cover interfaces in the presence of transverse magnetization. A model system consisting of an array of transversely magnetized asymmetric garnet/silicon-on-insulator waveguides is presented.

The optical isolator made of diluted magnetic semiconductor and the isolator made of a ferromagnetic-metal/semiconductor hybrid have been developed aiming to integrate nonreciprocal optical devices, such as an optical isolator and optical circulator, into the semiconductor-made optoelectronic integrated circuits,. The Cd1-xMnxTe exhibits a huge Faraday effect and can be grown on a semiconductor substrate. For Cd1-xMnxTe waveguide with a Cd1-xZnxTe/ Cd1-xMnxTe quantum well grown on GaAs substrate we achieved a high Faraday rotation of 2000 deg/cm, a high isolation ratio of 27 dB, a low optical loss of 0.5 dB/cm, and a high magneto-optical figure-of-merit of 2000 deg/dB/kG in a wide 25-nm wavelength range. It was predicted theoretically and proved experimentally the effect of non-reciprocal loss in hybrid semiconductor/ferromagnetic metal waveguides. This effect can be use for new design of waveguide optical isolator. Because of its simplicity and technological compatibility, this design is attractive for the integration into optoelectronic integrated circuits. The magneto-optical figure-of merit of 7% was demonstrated for the AlGaAs passive optical waveguide covered by Co.

Garnet films based on (BiPrGdLu) (FeGa) have been grown on (210) and (100) oriented SGGG substrates. (210) films with an easy plane of magnetization provided optimal imaging contrast. Incorporation of Au nanoparticles into an epitaxially grown film was done and these films show an increase in Faraday rotation, ostensibly due to the plasmon resonance effect.

Magneto-optical garnet based optical circulator was designed and fabricated with wafer-scale technology. Modeling and simulation strategy is established for the optimization of a new design of circulator based on ring cavity. Wafer-scale technological process is developed and demonstrated allowing fabrication of the optimized BIG/GGG buried ring circulator.