Hostname: page-component-586b7cd67f-l7hp2 Total loading time: 0 Render date: 2024-11-23T09:16:33.004Z Has data issue: false hasContentIssue false
  • English
  • Français

Vertical MOSFET Devices Fabricated on 3C-SiC with High and Low Material Quality

Published online by Cambridge University Press:  01 February 2011

Adolf Schoner ,
Mietek Bakowski ,
Per Ericsson ,
Helena Stromberg ,
Hiroyuki Nagasawa  and
Masayuki Abe
Adolf Schoner
Affiliation:
[email protected], Acreo AB, INM, Electrum 236, Kista, N/A, SE-16440, Sweden
Mietek Bakowski
Affiliation:
[email protected], Acreo AB, Kista, N/A, SE-16440, Sweden
Per Ericsson
Affiliation:
[email protected], Acreo AB, Kista, N/A, SE-16440, Sweden
Helena Stromberg
Affiliation:
[email protected], Acreo AB, Kista, N/A, SE-16440, Sweden
Hiroyuki Nagasawa
Affiliation:
[email protected], HOYA Corporation, Sagamihara, N/A, 229-1125, Japan
Masayuki Abe
Affiliation:
[email protected], HOYA Corporation, Sagamihara, N/A, 229-1125, Japan
Get access

Abstract

Vertical DMOSFET devices with sizes from single cell to 3x3 mm2 large devices have been fabricated on cubic 3C-SiC material. The used 3C-SiC substrates had varying material quality. The best quality had a more than 2 orders of magnitude lower density of extended crystal defects than the worst material. The processed and investigated vertical DMOSFET devices were designed for 600 V blocking voltage and had hexagonal unit cells with 2 μm channel length and aluminum implanted termination rings. The p-body was aluminum implanted and the source was phosphorus implanted. As deposited Ti/W contacts were evaluated as source and drain metallization. Single cell vertical DMOSFET devices, processed on the low defect density material quality, gave voltage blocking capabilities of more than 600 V with leakage currents of 0.1 to 10 μA. The same devices could handle currents around 5 mA in on-state at 15 V gate bias. MOSFET devices with 50 to 100 unit cells had blocking voltages of 400 to 500 V with on-state currents of 0.2 to 0.4 A at 15 V gate bias, indicating the potential of 3C-SiC for the fabrication of next generation power MOSFET devices.

Keywords

devicesmicroelectronicselectronic material
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 911: Symposium B – Silicon Carbide 2006 – Materials, Processing and Devices , 2006 , 0911-B13-03
Copyright
Copyright © Materials Research Society 2006

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1 Schörner, R., Friedrichs, P. and Peters, D., IEEE Trans. Elec. Dev., Vol. 46 (1999), p. 533 Google Scholar
2 Krieger, M., Pensl, G., Bakowski, M., Schöner, A., Nagasawa, H. and Abe, M., Mater. Sci. Forum, Vol. 483–485, pp. 441–444 (2005)Google Scholar
3 Wan, J., Capano, M.A., Melloch, M.R., Cooper, J.A., IEEE Elec. Dev. Lett. Vol.23, p. 482 (2002)Google Scholar
4 Ohshima, T. et al., Jpn. J. Appl. Phys., Vol. 42, p. L625 (2003)Google Scholar
5 Lee, K.K., Ishida, Y., Ohshima, T., Kojima, K., Tanaka, Y., Takahashi, T., Okumura, H., Arai, K., and Kamiya, T., IEEE Electron Device Letters, Vol. 24, p. 466 (2003)Google Scholar
6 Nagasawa, H., Yagi, K., Kawahara, T., Hatta, N., Pensl, G., Choyke, W. J., Yamada, T., Itoh, K. M., and Schöner, A., in “Silicon Carbide”, Eds. Choyke, W.J., Matsunami, H., Pensl, G., Springer-Verlag, Berlin, pp. 207–228 (2003)Google Scholar
7 Schöner, A., Bakowski, M., Ericsson, P., Strömberg, H., Nagasawa, H. and Abe, M., Mater. Sci. Forum, Vol. 483–485, pp. 801–804 (2005)Google Scholar
8 Abe, M., Nagasawa, H., Ericsson, P., Strömberg, H., Bakowski, M., and Schöner, A., Microelectronic Engineering Vol. 83/1, pp. 24–26 (2006)Google Scholar
9 Schöner, A., Bakowski, M., Ericsson, P., Strömberg, H., Nagasawa, H. and Abe, M., presented at the ICSCRM2005 conference in Pittsburgh USA, to be published in Mater. Sci. Forum (2006)Google Scholar