Hostname: page-component-cd9895bd7-dk4vv Total loading time: 0 Render date: 2024-12-27T02:25:32.300Z Has data issue: false hasContentIssue false
  • English
  • Français

Use of the Vacuum Arc Discharge for the Surface Modification

Published online by Cambridge University Press:  10 February 2011

Vladimir A. Kovalenko
Vladimir A. Kovalenko*
Affiliation:
Physics Department, Michigan Technological University, Houghton, MI 49931, USA
Get access

Abstract

Steel surface saturation by nitrogen (nitriding) results in a high increase in surface hardness and a decrease in friction rate. This treatment is widely used to increase the lifetime of cutting tools and wearing parts in machines.

A new approach of steel surface treatment by using the vacuum arc discharge in nitrogen is presented. The apparatus uses two arc vacuum discharges. The first discharge is a metal vapor discharge and serves for both the cleaning- heating of the treated surface and for the initiation of the second vacuum arc discharge in nitrogen. The vacuum arc source of metallic plasma allows us the simultaneous implantation of desirable metals and surface saturation by nitrogen. The developed arc vacuum discharge method shortens the nitriding time 2 to 3 times in comparison to the glow discharge technology. The suggested method of the surface treatment is suitable for a wide variety of steels. The hardness measurement results of nitriding and combined chromium with nitriding treatments of several steel samples are presented and discussed.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 585: Symposium L – Fundamental Mechanisms of Low-Energy-Beam Modified Surface , 1999 , 129
Copyright
Copyright © Materials Research Society 2000

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Carter, G. F., Met. Prog. 93, 117(1968).Google Scholar
2. Metals Handbook 4, Heat Treating, ASM, Metals Park, 9th ed., 191, (1981).Google Scholar
3. Walkowicz, J., Smolik, J., Miernik, K., Bujak, J., Surf. Coat. Technol. 97, 453– (1997).Google Scholar
4. Dingremont, N., Pianelli, A., Bergmann, E., Michel, H., Surf. Coat. Technol. 61, 187(1993).Google Scholar
5. Dingremont, N., Bergmann, E., Collignon, P., Surf. Coat. Technol. 72, 157(1995).Google Scholar
6. Vendik, O.G., Gorin, Yu.N., Popov, V.F., in Particle and Photon Technology, Higher School Publishing House, Moscow, 1984.Google Scholar
7. Roelandt, A., Elwart, J. and Rembges, W., Surface Engineering 1, 187– (1985)Google Scholar
8. Mott, N.F., Massey, H.S.W., in The Theory of Atomic Collisions, Oxford, Clarendon Press, 1965.Google Scholar
9. In Steel Heat Treatment Handbook, New York, Marcel Dekker, 1997.Google Scholar