Hostname: page-component-cd9895bd7-gxg78 Total loading time: 0 Render date: 2024-12-27T18:44:06.883Z Has data issue: false hasContentIssue false

Use of Matrix Assisted Pulsed Laser Evaporation (Maple) for the Growth of Organic Thin Films

Published online by Cambridge University Press:  15 February 2011

A. Piqué
Affiliation:
SFA, Inc., Largo, MD 20774
D.B. Chrisey
Affiliation:
Naval Research Laboratory, Washington, DC 20375
B.J. Spargo
Affiliation:
Naval Research Laboratory, Washington, DC 20375
M.A. Bucaro
Affiliation:
Geo-Centers, Inc. Ft. Washington, MD 20744.
R.W. Vachet
Affiliation:
Naval Research Laboratory, Washington, DC 20375
J.H. Callahan
Affiliation:
Naval Research Laboratory, Washington, DC 20375
R.A. McGill
Affiliation:
Naval Research Laboratory, Washington, DC 20375
D. Leonhardt
Affiliation:
Naval Research Laboratory, Washington, DC 20375
T.E. Mlsna
Affiliation:
Geo-Centers, Inc. Ft. Washington, MD 20744.
Get access

Abstract

A novel variation of conventional pulsed laser deposition, called matrix assisted pulsed laser evaporation, or MAPLE, has been utilized for growing organic thin films. The MAPLE technique is carried out in a vacuum chamber and involves directing a pulsed laser beam) onto a frozen target consisting of an organic compound dissolved in a solvent matrix. The laser beam evaporates the surface layers of the target with both solvent and organic molecules being released into the chamber. The volatile solvent is pumped away, whereas the organic molecules coat the surface of a substrate. Very thin and uniform films (50 to 100 nm) of various organic materials, such as carbohydrates, have been deposited on Si(111) and NaCl substrates. The films prepared using this method have been examined by optical microscopy, scanning electron microscopy, Fourier transform infrared spectroscopy, and electrospray mass spectrometry. Careful control of the processing conditions allowed carbohydrates such as sucrose and glucose, in addition to high molecular weight polymers such as dextran, to be transferred to the substrate as uniform films, without significant chemical decomposition. The use of MAPLE films for chemical and biological sensor applications is being investigated and the potential of this technique for producing high quality thin films of other organic compounds will be discussed.

Type
Research Article
Copyright
Copyright © Materials Research Society 1998

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Whitten, D. G., Kajiyama, T. and Kunitake, T., Guest Edtrs. MRS Bulletin, 20 (6), 18 (1995) andGoogle Scholar
Epstein, A. J. and Yang, Y., Guest Edtrs. MRS Bulletin, 22 (6), 13 (1997).Google Scholar
2. McGill, R.A., Chrisey, D.B., Piqué, A., and Mlsna, T.E., Proc. of Silicone in Coatings II, Orlando, FL, USA, 24-26th March, 1998, Paint Research Association, Teddington, UK.Google Scholar
3. McGill, R.A., Chrisey, D.B., Piqué, A. and Mlsna, T.E., Proc. IEEE Frequency Control Symp., Orlando, FL, 140 (1997).Google Scholar
4. McGill, R.A., Chrisey, D.B., Doresey, P.C., Matthews, P., Chung, R., Piqué, A., Mlsna, T.E. and Stepnowski, J.L., IEEE Trans. on Ultrasonics, Ferroelectrics, and Frequency Control (in press).Google Scholar
5. Spargo, B.J., Testoff, M.A., Nielsen, T.B., Stenges, D.A. and Rudolph, R.S., Adhesion, Spreading and Differentiation of Endothelical Cells on Self-Assembled Amino-and-Perfluoro-Alhylsilane Monolayers, Proc. Nat. Acad. Sci., USA, 91 1107011074, (1994).Google Scholar
6. Cima, L.G., Langer, R., Vacanti, J.P., J. of Bioactive and Compatible Polymers, 6 (3), 232 (1991).Google Scholar
7. Stenger, D.A., Georger, J.H., Dulcey, C.S., Hickman, J.J. and Rudolph, A.S.; J. Amer. Chem. Soc., 114 (22), 8435 (1992).Google Scholar