Hostname: page-component-6bf8c574d5-9nwgx Total loading time: 0 Render date: 2025-02-20T14:29:39.048Z Has data issue: false hasContentIssue false
  • English
  • Français

Use of Fly-Ash for Sealing a Radioactive Waste Repository

Published online by Cambridge University Press:  01 January 1992

Marc Ollagnier ,
Christian Tauziede  and
Jodl Olivier
Marc Ollagnier
Affiliation:
ANDRA, BP 38 - 92266 FONTENAY-AUX-ROSES Cedex - FRANCE
Christian Tauziede
Affiliation:
INERIS, BP 2 - 60550 VERNEUIL-EN-HALATTE - FRANCE
Jodl Olivier
Affiliation:
EDF, BP 605 - 13093 AIX-EN-PROVENCE Cedex 2 - FRANCE
Get access

Abstract

The mining industry currently uses fly-ash from coal-fired power-plants to close access shafts in abandoned mines, in sedimentary formations. The technique consists of installing a plug of fly-ash, about fifty meters high, at the base of the shaft-lining. In this study, fly-ash is considered as a possible sealant for radioactive repositories in sedimentary formations, as well as in hard rock.

Specific studies have been conducted in order to assess the feasibility of this technique, and to improve the long-term performance of the fly-ash seals. The hydraulic and mechanical characteristics of fly-ash, taken from the plug of an abandoned shaft, as well as from dumps of various ages, were measured. Laboratory tests showed that it is possible to reduce the hydraulic conductivity of fly-ash by a factor of thousand, with the addition of ten percent bentonite. Moreover, it seems possible to block fine fissures in the surrounding damaged rock by injecting grouts made of cement and fly-ash having maximum diameters of twenty micrometers.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 294: Symposium V – Scientific Basis for Nuclear Waste Management XVI , 1992 , 297
Copyright
Copyright © Materials Research Society 1993

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. BONTE, G. “La remblayage des puits aux MDPA” [“Shaft backfilling at MDPA”], Mines et Carrières, Paris, Volume 74, February 1992.Google Scholar
2. JARRIGE, A. “Las cendres volantes - Propriétés, applications industrielles” [“Fly-ash - Properties and industrial applications”], Eyrolles, Paris, 1971.Google Scholar
3. CIIAE, Y.S. & SNYDER, J.L. “Engineering properties and laboratory vibratory compaction of fly-ash” Conférence internationale :“Sous produits et ddchets dans le genie civil”, Paris, 1978.Google Scholar
4. TERZAGHI, K.V. “Mécanique thdorique des sols” [“Theoretical soil mechanics”], Dunod, Paris, 1951.Google Scholar
5. PETIT, V. & VAUBOURG, P. “D~termination des caract6ristiques hydrodynamiques des milieux aquiferes peu perméables - Slug test et pulse test” [“The determination of hydrodynamic characteristics in low hydraulic conductivity aquiferous environments - Slug test and pulse test”], Rapport du Bureau de Recherches Géologiques et Miniéres 82 SGN 943 EAU, Orleans, 1982.Google Scholar
6. RAT, M., LAVIRON, F. & JOREZ, J.C. “Essai Lafranc, et hydraulique des sols” [“The Lafranc test and soil hydraulics”], Bulletin de liaison des laboratoires routiers, Spécial N, Laboratoire Central des Ponts et Chaussees, Paris, 1970.Google Scholar
7. CASSAN, M. “Las essais d'eau dans la reconnaissance des sols” [“Water tests in soil reconnaissance“], Eyrolles, Paris, 1980.Google Scholar
8. COSTET, J., SANGLERAT, G. “Cours pratique de m6.canique des sols” [“Practical soil mechanics“], Dunod/Bordas, Paris, 1981.Google Scholar
9. IGARASHI, T. “Possibility of fly-ash as backfill material, sorbability and hydraulic conductivity of fly-ash”, Korean Nuclear Society, Proceedings of the 1991 Joint International Waste Management Conference, Volume I, pages 121-126.Google Scholar