Hostname: page-component-6bf8c574d5-t27h7 Total loading time: 0 Render date: 2025-02-18T06:41:56.599Z Has data issue: false hasContentIssue false
  • English
  • Français

The Use of Computer Simulations to Interpret and Understand Electrical Measurements

Published online by Cambridge University Press:  10 February 2011

Edward J. Garboczi
Edward J. Garboczi*
Affiliation:
Building Materials Division, 226/B350, NIST, Gaithersburg, MD 20899.
Get access

Abstract

It is very rare to obtain complete 3-D information in the form of images of the microstructure of a material. Most often this information is incomplete because the resolution is inadequate, or is restricted to 2-D, via some kind of micrograph, or is not available at all. In the case of incomplete microstructural information, electrical measurements are then used to try to check a hypothesized microstructure, to see ifit can account for the measured electrical response. But even when complete microstructural information is available, if the microstructure is random, then it is not possible to analytically calculate the electrical response of the microstructure. The use of computer simulations, both to generate material shape and topology and numerically solve the electrical equations, is then required. Computer simulations allow the use of more complex hypotheses for the microstructure of a material, as the electrical response can be accurately computed for a wide range of microstructural shapes and topologies.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 500: Symposium EE – Electrically Based Microstructural Characterization II , 1997 , 291
Copyright
Copyright © Materials Research Society 1998

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1) Garboczi, E.J., Finite element and finite difference programs for computing the linear electric and elastic properties of digital images of random materials, NIST Internal Report, in press (1998); available at http://ciks.cbt.nist.gov/garboczi/, Chapter 2.Google Scholar
2) Douglas, J.F. and Garboczi, E.J., Adv. in Chem. Phys. 91, 85–153 (1995); available at http://ciks.cbt.nist.gov/garboczi/, Chapter 11.Google Scholar
3) Garboczi, E.J. and Douglas, J.F., Phys. Rev. E 53, 6169–6180 (1996).Google Scholar
4) Hashin, Z., J. Appl. Mech. 50, 481–505 (1983).Google Scholar
5) Christensen, B.J., Mason, T.O., Jennings, H.M., Bentz, D.P., and Garboczi, E.J., “Experimental and computer simulation results for the electrical conductivity of portland cement paste,” in Advanced Cementitious Systems: Mechanisms and Properties, edited by Glasser, F.P., McCarthy, G.J., Young, J.F., Mason, P.L., and Pratt, P.L. (Materials Research Society Symposium Proceedings Vol. 245, Pittsburgh, 1992), pp. 259–264; also at http://ciks.cbt.nist.gov/garboczi/, Chapter 5.Google Scholar
6) Garboczi, E.J. and Bentz, D.P., J. Mater. Sci. 27, 2083–2092 (1992); also at http://ciks.cbt.nist.gov/garboczi/, Chapter 5.Google Scholar
7) Coverdale, R.T., Christensen, B.J., Mason, T.O., Jennings, H.M., Garboczi, E.J., and Bentz, D.P., J. Mater. Sci. 30, 712–719 (1995); also at http://ciks.cbt.nist.gov/garboczi/, Chapter 5.Google Scholar
8) Olson, R.A., Christensen, B.J., Coverdale, R.T., Ford, S.J., Moss, G.M., Jennings, H. M., Mason, T.O., and Garboczi, E.J., J. Mater. Sci. 30, 5078–5086 (1995); also at http://ciks.cbt.nist.gov/garboczi/, Chapter 5.Google Scholar
9) Coverdale, R.T., Christensen, B.J., Mason, T.O., Jennings, H.M., and Garboczi, E.J., J. Mater. Sci. 29, 4984–4992 (1994); also at http://ciks.cbt.nist.gov/garboczi/, Chapter 5.Google Scholar
10) Hsieh, G., Mason, T.O., Garboczi, E.J., and Pederson, L. R., Sol. St. Ionics 96, 153–172 (1997).Google Scholar
11) Hsieh, G., Edwards, D.D., Ford, S.J., Hwang, J.-H., Shane, J., Garboczi, E.J., and Mason, T.O., Electrically Based Microstructural Characterization Vol. 411, edited by Gerhardt, R.A., Taylor, S. R., and Garboczi, E.J. (Materials Research Society, Pittsburgh, 1996), pp. 3–12.Google Scholar
12) Clarke, D.R., J. Amer. Ceram. Soc. 75, 739–759 (1992).Google Scholar
13) Garboczi, E.J. and Bentz, D.P., “Multi-scale analytical/numerical theory of the diffijsivity ofconcrete,” Adv. Cem.-Based Mater. 8, 77–88 (1998).Google Scholar