Hostname: page-component-586b7cd67f-dsjbd Total loading time: 0 Render date: 2024-11-29T07:12:17.211Z Has data issue: false hasContentIssue false
  • English
  • Français

Ultrafast Laser Textured Silicon Solar Cells

Published online by Cambridge University Press:  21 March 2011

Barada K. Nayak ,
Vikram Iyengar  and
Mool C. Gupta
Barada K. Nayak
Affiliation:
Charles L. Brown Department of Electrical and Computer Engineering, University of Virginia, Charlottesville, VA 22904
Vikram Iyengar
Affiliation:
Charles L. Brown Department of Electrical and Computer Engineering, University of Virginia, Charlottesville, VA 22904
Mool C. Gupta*
Affiliation:
Charles L. Brown Department of Electrical and Computer Engineering, University of Virginia, Charlottesville, VA 22904
*
Corresponding author E-mail: [email protected]
Get access

Abstract

A novel ultrafast laser texturing method has been developed to produce arrays of nano/micro surface textures in silicon. Laser processing conditions have been optimized for achieving appropriate optical and electronic properties for photovoltaic applications. The textured silicon surfaces absorb greater than 99% of incident light over the entire solar spectrum and the material appears complete black to bare eye. Textured silicon surfaces are characterized for surface morphology and optical properties. Chemical etching and thermal annealing steps have been performed to remove laser slag and induced defects. Finally, we report the total and external quantum efficiency results on photovoltaic devices fabricated on the textured silicon wafers, which can be further improved.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 1123: Symposium P – Photovoltaic Materials and Manufacturing Issues , 2008 , 1123-P07-09
Copyright
Copyright © Materials Research Society 2009

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

[1] King, D. L. and Buck, M. E., “Experimental Optimisation of an Anisotropic Etching Process for Random Texturisation of Silicon Solar Cells”, Proc. 22nd IEEE Photovoltaic Specialists Conf., pp. 303–308 (1991).Google Scholar
[2] Sarti, D., Le, Q. N., Bastide, S., Goaer, G., and Ferry, D., “Thin industrial multicrystalline solar cells and improved optical absorption”, Proceedings of the 13th European PV Solar Energy Conference, pp. 25–28, 1995.Google Scholar
[3] Zolper, J. C., Narayanan, S., Wenham, S. R. and Green, M. A., “16.7 % efficient, laser textured, buried contact polycrystalline silicon solar cell”, Appl. Phys. Letts., 55 (22), 2363 (1989).Google Scholar
[4] Pirozzi, L., Arabito, G., Artuso, F., Barbarossa, V., Besi-Vetrella, U., Loreti, S., Mangiapane, P., Salza, E., Selective emitters in buried contact silicon solar cells: Some low-cost solutions”, Solar Energy Materials & Solar Cells 65, 287–295 (2001).Google Scholar
[5] Abbott, Malcolm, and Cotter, Jeffrey, “Optical and Electrical Properties of Laser Texturing for High-efficiency Solar Cells Cells”, Prog. Photovolt: Res. Appl.; 14:225–235, (2006).Google Scholar
[6] Nayak, Barada K., Gupta, Mool C. and Kolasinski, Kurt W., “Spontaneous formation of nano-spiked microstructures in germanium by femtosecond laser irradiation”, Nanotechnology, 18, 195302. (2007).Google Scholar
[7] Nayak, Barada K., Gupta, Mool C. and Kolasinski, Kurt W., “Ultrafast-laser-assisted chemical restructuring of silicon and germanium surfaces”, Applied Surface Science, 253, 6580, (2007).Google Scholar
[8] Kolasinski, Kurt W., Dudley, Margaret E., Nayak, Barada K., and Gupta, Mool C., “Pillars formed by laser ablation and modified by wet etching”, Invited Paper –Proceedings of SPIE, The International Society for Optical Engineering, Vol. 6586, Prague, Czech Republic, (2007).Google Scholar
[9] Gupta, Mool C. and Nayak, Barada K., “Systems and methods of laser texturing and crystallization of material surfaces”, International Patent Application Serial No. PCT /US2006/049065), filed on December 21, 2006 in the U.S. Patent and Trademark Office.Google Scholar
[10] Heyns, M. M., Bearda, T., Cornelissen, I., S. De Gendt, Degraeve, R., Groeseneken, G., Kenens, C., Knotter, D. M., Loewenstein, L. M., Mertens, P., Mertens, S., Meuris, M., Nigam, T., Schaekers, M., Teerlinck, I., Vandervorst, W., Vos, R., and Wolke, K., “Cost-effective cleaning and high-quality thin gate oxides,” IBM J. Res. Develop., vol. 43, no. 3, p. 339, May 1999.Google Scholar
[11] Crouch, C. H., Carey, J. E., Shen, M., Mazur, E., Genin, F. Y., “Infrared absorption by sulfer-doped silicon formed by femtosecond laser radiation,” Appl. Phys. A, 79, 1635 (2004).Google Scholar