Article contents
Ultra Low-dielectric-constant Materials for 65nm Technology Nodeand Beyond
Published online by Cambridge University Press: 17 March 2011
Abstract
Pore characteristics including pore size distribution, porosity, and poreinterconnectivity of PECVD SiCOH inter- layer dielectric (ILD) materialswith different dielectric constant (κ) values have been studied. Oxygenplasma damage to SiCOH low-κ films increases dramatically as the κ valuedecreases. Simulations showed that, compared to the ILD film, the overheaddielectric films have a significant impact on the overall effective κ (κeff) of the BEOL interconnects. Reducing the κ values ofthese overhead films helps to alleviate the pressure on the κ valuerequirement of the ILD materials while still meeting the κeff target. Ultralow-κ (ULK) PECVD hydrogenated silicon carbide (H:SiC) films with a κ of 3.0have been studied for the etch-stop applications. Studies of the chemicalcomposition and bonding structure suggest that less Si-C networκs are formedand more micro-porosity are incorporated in the ULK H:SiC film. The leakagecurrent of the ULK H:SiC film is found to be about 5 times lower than theH:S iC and H:SiCN films with higher κ values. The etch rate of ULK H:SiCfilm using a standard SiCOH ILD etch chemistry has been found to benegligible. Such an extremely high etch selectivity maκes these films verygood etch-stop layers.
- Type
- Articles
- Information
- Copyright
- Copyright © Materials Research Society 2004
References
- 1
- Cited by