Hostname: page-component-745bb68f8f-v2bm5 Total loading time: 0 Render date: 2025-02-10T08:34:57.581Z Has data issue: false hasContentIssue false
  • English
  • Français

Two—Phase Nickel Aurunides

Published online by Cambridge University Press:  28 February 2011

P. S. Khadkikar ,
K. Veduia  and
B. S. Shabel
P. S. Khadkikar
Affiliation:
Dept. of Metallurgy and Materials Science, Case Western Reserve University, Cleveland,OH 44106
K. Veduia
Affiliation:
Dept. of Metallurgy and Materials Science, Case Western Reserve University, Cleveland,OH 44106
B. S. Shabel
Affiliation:
Alcoa Laboratories, Alcoa Center, PA 15069
Get access

Abstract

The as—extruded microstructures of two alloys in the two phase field consisting of Ni3Al and NiAl in the Ni—Al phase diagram exhibit fibrous morphologyand consist of Ll2 Ni3Al and B2 NiAl. These as—extruded microstructures can be modified dramatically by suitable heat treatments. Martensite plus NiAl or martensite plus Ni3Al microstructures are obtained upon quenching from1523 K. Aging of martensite at 873 K results in the recently identified phase Ni5Al3 whereas aging at 1123 K reverts the microstructures to Ni Al plui NAl. The microstructures with predominantly martensite or Ni5Al3 phases are brittle in tension at room temperature. The latter microstructure does not deformplastically even in compression at room temperature. However, some promise of room temperature tensile ductility is indicated by the Ni3Al plus NiAl phase mixtures.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 81: Symposium H – High-Temperature Ordered Intermetallic Alloys II , 1986 , 157
Copyright
Copyright © Materials Research Society 1987

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Aoki, K. and Izumi, O, Nippon Kinzaku Gakkaishi, 43, 1190, (1979).Google Scholar
2. Liu, C. T., White, C. L. and Horton, J. A., Acta Metall., 33, 213, (1985).Google Scholar
3. Liu, C. T. and White, C. L., Mater. Res. Soc. Symp. Proc., 39, 365, (1985).Google Scholar
4. Vedula, K., Pathare, V., Aslanidis, I. and Titran, R., Mater. Res. Soc. Symp. Proc., 39, 365, (1985).Google Scholar
5. Chakravorty, S. and Wayman, C. M., Metall. Trans., 7A, 555, 1976.Google Scholar
6. Enami, K. and Nenno, S., Jpn. Inst. Met., 19, 571, 1978.Google Scholar
7. Robertson, I. M. and Wayman, C. M., Metalloraphy, 17, 43, (1984).Google Scholar
8. Khadkikar, P. S. and Vedula, K., submitted to J. Mater. Res.Google Scholar
9. Singleton, M. F., Murray, J. and Nash, P., submitted to Bull. Alloy Phase Diagrams.Google Scholar
10. Khadkikar, P. S. and Vedula, K., unpublished results.Google Scholar