Hostname: page-component-586b7cd67f-tf8b9 Total loading time: 0 Render date: 2024-11-25T17:30:34.689Z Has data issue: false hasContentIssue false
  • English
  • Français

Tungsten Carbide Erosion Resistant Coating for Aerospace Components

Published online by Cambridge University Press:  21 February 2011

D. Garg  and
P. N. Dyer
D. Garg
Affiliation:
Air Products and Chemicals, Inc., 7201 Hamilton Boulevard, Allentown, Pennsylvania 18195-1501
P. N. Dyer
Affiliation:
Air Products and Chemicals, Inc., 7201 Hamilton Boulevard, Allentown, Pennsylvania 18195-1501
Get access

Abstract

An increasing problem faced by the aerospace industry is the erosive wear of engine components. Various PVD protection coatings have been used previously to combat this wear problem, but with limited success. This paper presents results obtained with a low-temperature CVD, erosion resistant, multilayer tungsten carbide coating system. The coating can be deposited at temperatures below 500°C on ferrous alloys used in the aerospace industry. The low temperature of deposition eliminates the problem of degradation of mechanical properties that occurs with normal high-temperature chemical vapor deposition processes. High-cycle fatigue strength and other mechanical property data are presented for coated stainless steel, as well as results on erosion and impact resistance at 90° impingement.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 168 , 1989 , 213
Copyright
Copyright © Materials Research Society 1990

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1.Yee, K. K., Int. Metals Rev., 226, No. (1), 19–41 (1978).Google Scholar
2.Newhart, J. E., (Evaluating and controlling erosion in aircraft turbine engine), publication of Naval Air Propulsion Test Center, Trenton, N.J., 1983.Google Scholar
3.Schell, J. D. and Taylor, K. P., Technical Report No. NADC-86144-60, prepared by Aircraft Engine Business Group of General Electric Company, September 1986.Google Scholar
4.Rashid, J. M., Freling, M., Friedrich, L. A., report prepared for NASA Lewis Research Center under Contract NAS 3-20072 by United Technologies Corporation, Pratt & Whitney, East Hartford, Conn., May 1987.Google Scholar
5.Groves, M. T., report prepared for NASA Lewis Research Center under contract NAS 3-14339 by TRW, Inc., November 1973.Google Scholar
6.Hintermann, H. E., VDI Berichte, No. 506 131–138 (1984).Google Scholar
7.Levy, M. and Morrossi, J. I., report prepared by Army Materials and Mechanics Research Center, Watertown, Mass., February 1976.Google Scholar
8.Green, H. M., Technical Report No. AFMC-TR-70-114, prepared by General Electric Company, May 1970.Google Scholar
9.McComas, C. C. et.al., Report No. AMMRC CTR 74-9, prepared for AMMRC by Pratt & Whitney Aircraft, March 1974.Google Scholar
10.McAnally, W. J., III, Report No. DAAG46-71-C-0173, prepared for AMMRC by Pratt & Whitney Aircraft, January 1973.Google Scholar
11.Archer, N. J. and Yee, K. K., Wear, 48 237–250 (1978).Google Scholar
12.Yee, K. K., Sulzer Technical Review, Research Number 1978.Google Scholar
13.Garg, D., Dyer, P. N., Dimos, D., Sunder, S., Hintermann, H. E., Maillat, M., proceedings of the 12th Annual Conference on Composites and Advanced Ceramic Materials, Cocoa Beach, Fla., 1215-1222 January 17-22, 1988.Google Scholar
14.Garg, D., Dimos, D., Dyer, P. N., Stevens, R. E., presented at 15th International Conference on Metallurgical Coatings, San Diego, Calif., April 1988 (unpublished).Google Scholar
15.Migotsky, V., Design Eng. 30-39 (July/August 1982).Google Scholar
16.Gibeaut, W. A. and Bartlett, E. S., in Coatings of High-Temperature Materials, Part 2, edited by Hansner, Henry H., (Plenum Press, New York, 1966), p. 101.Google Scholar
17.Technical Bulletin titled “AM-350/AM-355 Precipitation Hardening Stainless Steels,” published by Allegheny Ludlum Steel Corporation, Pittsburgh, PA, 1963.Google Scholar
18.Chromium-Nickel Stainless Steel Data, Section I, Bulletin D titled “Precipitation Hardenable Stainless Steels,” published by the International Nickel Company, Inc., New York, 1963.Google Scholar