Hostname: page-component-cd9895bd7-7cvxr Total loading time: 0 Render date: 2024-12-27T02:03:41.194Z Has data issue: false hasContentIssue false
  • English
  • Français

Topography Evolution of Si (001) Substrate Fabricated by Ar+ Ion Beam Sputter Etching

Published online by Cambridge University Press:  01 February 2011

Hyung Seok Kim ,
Ju Hyung Suh  and
Chan Gyung Park
Hyung Seok Kim
Affiliation:
Department of Materials Science & Engineering Pohang University of Science and Technology (POSTECH), Pohang 790–784, Korea
Ju Hyung Suh
Affiliation:
Department of Materials Science & Engineering Pohang University of Science and Technology (POSTECH), Pohang 790–784, Korea
Chan Gyung Park
Affiliation:
Department of Materials Science & Engineering Pohang University of Science and Technology (POSTECH), Pohang 790–784, Korea
Get access

Abstract

Self-formed nanopatterns on Si (001) substrates fabricated by ion beam sputter etching were investigated by atomic force microscopy (AFM). The ion beam sputtering was performed with an Ar+ ion beam produced from a Kaufman type ion gun. In order to fabricate the periodic nanoscale patterns on Si surface, the effects of sputter parameters such as ion energy, flux, incident angle and etching time on surface morphology was investigated. As a result, nanometer scale ripples and 3-dimensioal nanodots were formed uniformly after ion beam sputtering. The surface morphology of Si was significantly dependent on incident angle and ion beam flux.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 849: Symposium KK – Kinetics-Driven Nanopatterning on Surfaces , 2004 , KK3.6
Copyright
Copyright © Materials Research Society 2005

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Cuomo, Jerome J., Rossnagel, Stephen M., Kauffman, Harald R.: Handbook of Ion Beam Processing Technology, NOYES Publications, USA, (1989).Google Scholar
2. Facsko, S., Dekorsy, T., Koerdt, C., Trappe, C., Kurz, H., Vogt, A., and Hartnagel, H. L., Science, 285, 1551 (1999).Google Scholar
3. Erlebacher, J., Aziz, M. J., Chason, E., Sinclair, M. B., and Floro, J. A., Phys. Rev. Lett. 82, 2330 (1999).Google Scholar
4. Fenner, D. B., J. of Appl. Phys. 95, 5408 (2004).Google Scholar
5. Bradley, R. M. and Harper, J. M. E., J. of Vac. Sci. and Tech. A 6, 2390 (1988).Google Scholar
6. Kaufman, H. R., Cuomo, J. J., and Harper, J. M. E., J. of Vac. Sci. and Tech., 21, 725 (1982).Google Scholar
7. Kaufman, Harald R. and Robinson, Raymond S.: Operation of Broad-Beam Sources, Commonwealth Scientific Corporation, Alexandria Virginia (1987).Google Scholar
8. Makeev, Maxim, Cuero, Rodolfo, and Barabasi, Albert-Laszlo, Nuclear Instruments and Methods in Physics Research Section B, 197, 185 (2002)Google Scholar