Hostname: page-component-586b7cd67f-g8jcs Total loading time: 0 Render date: 2024-11-25T17:25:49.874Z Has data issue: false hasContentIssue false
  • English
  • Français

Three-Color Passive-Matrix Pixels Using Dye-Diffusion-Patterned Tri-Layer Polymer-Based LED

Published online by Cambridge University Press:  15 March 2011

Ke Long ,
Florian Pschenitzka  and
J. C. Sturm
Ke Long
Affiliation:
Center for Photonics and Optoelectronic Materials (POEM), Department of Electrical Engineering, Princeton University, Princeton, New Jersey 08544
Florian Pschenitzka
Affiliation:
Center for Photonics and Optoelectronic Materials (POEM), Department of Electrical Engineering, Princeton University, Princeton, New Jersey 08544
J. C. Sturm
Affiliation:
Center for Photonics and Optoelectronic Materials (POEM), Department of Electrical Engineering, Princeton University, Princeton, New Jersey 08544
Get access

Abstract

Dry dye-printing and solvent-enhanced dye diffusion were used to locally dope a previously spin-coated poly(9-vinylcarbazole) (PVK) polymer film with different dyes to fabricate side-by-side RGB OLED pixels. To reduce reverse leakage current and raise efficiency, a blanket tris-8-hydroxyquinoline aluminum (Alq) electron transport layer (ETL) was deposited over the polymer layer after the dye diffusion step, along with a 2,9-dimethyl-4,7-diphenyl-1,10-phenanthroline (BCP) hole/exciton blocking layer between the Alq and the PVK to ensure all light emission occurred from the doped polymer and not from the Alq. Devices with this tri-layer structure have an extremely low reverse leakage current (rectification ratio of 106 at +/- 10V) and a higher external quantum efficiency (∼1%) than single layer devices. A three-color passive-matrix test array with 300μm x 1mm RGB subpixels was demonstrated with this structure.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 708: Symposium BB – Organic Optoelectronic Materials, Processing and Devices , 2001 , BB6.8
Copyright
Copyright © Materials Research Society 2002

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Wu, C. C., Sturm, J. C., Register, R. A., Tian, J., Dana, E. P. and Thompson, M. E., IEEE Trans. Elec. Dev. 44, 1269 (1997).Google Scholar
2. Hebner, T. R. and Sturm, J. C., Appl. Phys. Lett. 73 (13), 1913 (1999).Google Scholar
3. Kido, J., Shirai, S., Yamagata, Y. and Harada, G., presented at Mat. Res. Soc. Symp., San Francisco, CA (1999).Google Scholar
4. Tada, K. and Onoda, M., Jpn. J. Appl. Phys. 38, L1143 (1999).Google Scholar
5. Pschenitzka, F. and Sturm, J. C., Appl. Phys. Lett. 74 (13), 1913 (1999).Google Scholar
6. Pschenitzka, F. and Sturm, J. C., Proc. SPIE 59, 4105 (2000).Google Scholar
7. Pschenitzka, F. and Sturm, J. C., Appl. Phys. Lett. 78 (17), 2584 (2001).Google Scholar
8. Braun, D., Synthetic Metals 92, 107 (1998).Google Scholar
9. Bulovic, V., Khalfin, V. B., Gu, G., Burrows, P. E., Garbuzov, D. Z. and Forrest, S. R., Phys. Rev. B 58, 3730 (1998).Google Scholar
10. Hill, I.G. and Kahn, A., J. Appl. Phys. 86, 4515 (1999).Google Scholar