Hostname: page-component-586b7cd67f-t7fkt Total loading time: 0 Render date: 2024-11-29T07:26:03.221Z Has data issue: false hasContentIssue false
  • English
  • Français

Thin Metal Film Adhesion Studies on GaAs

Published online by Cambridge University Press:  26 February 2011

T. T. Bardin ,
J. G. Pronko  and
D. K. Kinell
T. T. Bardin
Affiliation:
Lockheed Palo Alto Research Laboratory, D91–10 B203 3251 Hanover St., Palo Alto, Ca. 94304
J. G. Pronko
Affiliation:
Lockheed Palo Alto Research Laboratory, D91–10 B203 3251 Hanover St., Palo Alto, Ca. 94304
D. K. Kinell
Affiliation:
Lockheed Palo Alto Research Laboratory, D91–10 B203 3251 Hanover St., Palo Alto, Ca. 94304
Get access

Abstract

Comparative thin film adhesion studies were performed on GaAs substrates using Au or Au-Ni-Ge, metallization materials. The influence of parameters such as crystal orientation, substrate surface preparation, deposition vacuum conditions, thickness and composition of films, and post-evaporative treatment such as ion-beam mixing and thermal annealing, on film adhesion was considered. The quality of the adhesion bond was measured using Scotch tape tests and a Sebastian adhesion tester. Film interfaces were characterized using AES, XPS, and RBS techniques. The results indicate that the most important factors dominating the quality of adhesion were surface preparation and the deposition vacuum conditions. Films deposited under optimum conditions were found to adhere so well that the GaAs crystal would fracture before the film would pull free of the substrate. The influence of ion beam mixing on the quality of adhesion was tested and only in the cases of depositions under the less optimum conditions, where the adhesion was poor, could an improvement be made in the adhesive properties.

Type
Articles
Information
MRS Online Proceedings Library (OPL) , Volume 77: Symposium D – Interfaces, Superlattices, and Thin Films , 1986 , 731
Copyright
Copyright © Materials Research Society 1987

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Morgan Semiconductor Division, Chemical Group, 2623 National Circle, Garland, TX; Crystal Specialties Inc., Ephrain Canyon Road, Ephrain, UT.Google Scholar
2. Baglin, J. E. E., Mat. Res. Soc. Symo. Proc. 47 3 (1985).CrossRefGoogle Scholar
3. Williams, Ralph E., Gallium Arsenide Processing Techniques, 1st ed. (Artech House, Dedham, Ma, 1984), p. 85.Google Scholar
4. Seiberling, L. E., (presented at the 9th Conference on the Application of Accelerators in Research and Industry, Denton, TX, Nov. 1986) to be published in the conference proceedings, Nucl. Inst. and Meth., April 1987.Google Scholar