Hostname: page-component-586b7cd67f-dsjbd Total loading time: 0 Render date: 2024-11-29T07:45:59.793Z Has data issue: false hasContentIssue false
  • English
  • Français

Thin Films of SrFeO2.5+x - Effect of Preferred Orientation on Oxygen Uptake

Published online by Cambridge University Press:  15 February 2011

Brian W. Sanders ,
Jianhua Yao  and
Michael L. Post
Brian W. Sanders
Affiliation:
Institute for Environmental Chemistry, National Research Council Canada, Montreal Road, Ottawa, Canada, K1A 0R6.
Jianhua Yao
Affiliation:
Institute for Environmental Chemistry, National Research Council Canada, Montreal Road, Ottawa, Canada, K1A 0R6.
Michael L. Post
Affiliation:
Institute for Environmental Chemistry, National Research Council Canada, Montreal Road, Ottawa, Canada, K1A 0R6.
Get access

Abstract

Pulsed laser ablation has been used to deposit thin films of SrFeO25+x (x = 0 to ≈0.5). Previous work has shown that the orientation of the films, determined by powder x-ray diffraction depended strongly upon the deposition temperature. Films grown below 770 K showed little or no orientation. A growth temperature of 900 K resulted in films oriented (200). Growth temperatures of > 1000 K produced films oriented predominantly (110). At 673 K in an oxygen atmosphere, oriented films readily converted from the oxygen deficient brownmillerite form (x=0) to the oxygen rich cubic (or distorted cubic) perovskite form (x≈0.3). Films which exhibited no initial orientation did not react with oxygen under these conditions. Cycling non-oriented films between 230 and 800 ppm of oxygen in 101.3 kPa of nitrogen at 673 K resulted in weak (110) orientation. Once oriented, the films reacted readily with oxygen and exhibited measurable resistance changes. The conversion from oxygen deficient to oxygen rich form was monitored by x-ray diffraction and the DC resistance of the films.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 343: Symposium H – Polycrystalline Thin Films - Structure, Texture, Properties and Applications , 1994 , 463
Copyright
Copyright © Materials Research Society 1994

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Sanders, Brian W., and Post, Michael L. in Laser Ablation in Materials Processing: Fundamentals and Applications, edited by Braren, B., Dubowski, J.J., and Norton, D.P. (Mater. Res. Soc. Proc. 285, Pittsburgh, PA, 1993) pp. 427–432.Google Scholar
2. Post, M.L., Sanders, B.W. and Kennepohl, P. in Chemical Sensors. (Tech. Digest Fourth Int. Meeting Chemical Sensors, Tokyo, Japan 1992) pp. 322–325.Google Scholar
3. Takeda, Y., Kanno, K., Takada, T., Yamamoto, O., Takano, M., Nakayama, N. and Bando, Y., J. Solid State Chem. 63, 237 (1986).CrossRefGoogle Scholar
4. Hombo, Jukichi, Matsumoto, Yasumichi, and Kawano, Takeo, J. of Solid State Chem., 84, 138 (1990).CrossRefGoogle Scholar
5. Yamamura, Y., Ninomiya, Y., and Sekido, S. in Chemical Sensors, edited by Seiyama, T., Fueki, K., Shiokawa, J. and Suzuki, S. (Proc. Int. Meet. Chem. Sensors, Anal. Chem. Symp. Series 17, Fukuoka, Japan 1983) pp. 187–192.Google Scholar
6. Liu, Donhang, Yao, Xi, and Cross, L.E., J. Appl. Phys. 71 (10), 5115 (1992).CrossRefGoogle Scholar