Hostname: page-component-586b7cd67f-r5fsc Total loading time: 0 Render date: 2024-11-25T17:48:13.207Z Has data issue: false hasContentIssue false
  • English
  • Français

Thermomechanically Modulated Nanoscale Multilayered Materials for Application in Electromagnetic Gun Systems

Published online by Cambridge University Press:  03 September 2012

M. A. Otooni ,
I. G. Brown  and
O. Monteiro
M. A. Otooni
Affiliation:
US ARMY ARDEC, Picatinny Arsenal, NJ 08706-5000, [email protected]
I. G. Brown
Affiliation:
Lawrence Berkeley Laboratory, University of California, Berkeley, CA 94720
O. Monteiro
Affiliation:
Lawrence Berkeley Laboratory, University of California, Berkeley, CA 94720
Get access

Abstract

Fired rails from electromagnetic railguns show severe damage from arcing and tribological mismatch. We have fabricated and studied several different nanoscale multilayered materials as possible routes to improve the thermal transport and thermomechanical properties of the rail and armature materials. A vacuum-arc-based plasma deposition technique with wide control of ion energy was used for the film synthesis, and high-energy high-dose (energy up to ˜ 150 keV, dose up to ˜ 1 × 1017cm−2) metal ion implantation was also used. The multilayered film structures formed and investigated included sublayers of Ti, TiCo, ZrN, TaN and dlc (diamond-like carbon) in the following combinations: (i) ZrN on TiCo on TaN on dlc on a Cu substrate, (ii) ZrN on TiCo on TaN on dlc on an Al substrate, (iii) TiN on TiCo on TaN on a stainless steel substrate, and (iv) Ti on TiCo on a stainless steel substrate. Individual sublayer film thickness was in the range of 400Å-7μ. The surfaces were characterized by SEM, TEM, RBS, high energy electron diffraction, arid microhardness measurements. Significant improvements in the material surface properties were obtained for virtually all of the surface structures investigated. Here we outline the material synthesis and surface modification techniques used and the materials characterization results obtained.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 438: Symposium A – Materials Modificaton and Synthesis by Ion Beam… , 1996 , 633
Copyright
Copyright © Materials Research Society 1997

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Colombo, G., Otooni, M. A., Application of Coating Technology for Electromagnetic Gun Systems, IEEE, Vol.31, No. 1, p. 723–728, (1995).Google Scholar
2. Brown, I.G., Godechot, X. and Yu, K. M., “Novel metal Ion Surface Modification technique” Applied. Phys. lett. 58, 1392–1394 (1991).Google Scholar
3. Brown, I. G., Anders, A., Anders, S., Dickinson, M. R., Ivonov, I. C, MacGill, R. A., Yao, X, and Yu, K. M., “Plasma Synthesis of Metallic and Composite Thin Films with Atomically Mixed Substrate Bonding, Nucl. Instrum. Meth. Phys. Res. B80/81, 1281–1287 (1993).Google Scholar
4. Anders, A., Anders, S., brown, I. G., and Ivonov, I. C., “Low Energy Ion Implantation/Deposition as a Film Synthesis and Bonding Tool”, Mat. Res. Soc. Symp. Proc. 316. 833 (1994).Google Scholar
5. Otooni, M. A., Brown, I. G., Anders, S., and Wang, Z., “Nanoscale Multilayer Materials for Application in Electromagnetic Gun Systems” Mat. Res. Soc. Symp. Proc. 369, p. 649 (1996).Google Scholar
6. Otooni, M., Graf, A., Colombo, G., Conrad, J., and Sridharan, K., “Application of Coating for Electromagnetic Gun Technology, Mat. Res. Soc. Symp. Proc. 296, p. 577 (1993).Google Scholar