Hostname: page-component-6bf8c574d5-w79xw Total loading time: 0 Render date: 2025-02-20T14:16:58.910Z Has data issue: false hasContentIssue false
  • English
  • Français

Thermal Considerations in a Very Deep Borehole Nuclear Waste Repository for Synroc

Published online by Cambridge University Press:  21 March 2011

G.D. Sizgek
G.D. Sizgek*
Affiliation:
Australian Nuclear Science and Technology Organisation, Materials Division, Menai NSW 2234, AustraliaEmail: [email protected]
Get access

Abstract

A study of heat propagation in a very deep borehole radioactive waste repository for Synroc is presented. The deep borehole modeled for the high level wastes is hypothetically sited at approximately 4 km below ground level in a granite host rock. The high level waste containers are placed in the lower section of the borehole to within 1.5 km of the surface and backfilled. A geothermal gradient of 0.03°C/m is assumed. Transient temperature field calculations are carried out for both 20 wt% and 10 wt% high level radioactive waste (HLW) bearing Synroc, for cooling periods between reactor discharge and geological disposal varying from 5 years to 50 years. The temperatures in the borehole repository were found to be very sensitive to the surface cooling period as well as the waste loading. The initial heat input of the waste may be controlled by cooling in an interim storage until the total heat output is reduced to a suitably low level. Therefore, surface cooling of at least 15 years for 20 wt% HLW containing Synroc is necessary for the given deep bore hole configuration to avoid the centerline temperatures that might affect durability of Synroc if ground water obtained access to the waste form. On the other hand the corresponding minimum surface cooling period for 10 wt% HLW containing Synroc is predicted to be about 5 years to produce similar temperature profiles in the borehole to those of 20 wt% HLW bearing Synroc with a 15-year cooling period before disposal. A variation in the borehole diameter has also been performed to elucidate the sensitivity of the temperature field of the repository.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 663: Symposium – Scientific Basis for Nuclear Waste management XXIV , 2000 , 819
Copyright
Copyright © Materials Research Society 2001

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Ringwood, A.E., Safe disposal of high level radioactive wastes, (Australian National University Press, 1980).Google Scholar
2. Oversby, V.M., and Ringwood, A.E., Leach testing of Synroc and glass samples at 85 and 200°C, Nucl. Chem. Waste Manage. 2, 201, (1981).Google Scholar
3. Ringwood, A.E., Kesson, S.E., Reeve, K.D., Levins, D.M., and Ramm, E.J., Radioactive waste forms for the future, edited by Lutze, W. and Ewing, R. C., (North-Holland Publishers Amsterdam, 1988) pp. 233–334.Google Scholar
4. Juhlin, C. and Sandstedt, H., Storage of Nuclear Waste in Very Deep Boreholes: Feasibility study and assessment of economic potential, SKB-TR-89-39, (1989).Google Scholar
5. Management of commercially generated radioactive waste, Draft environmental impact statement, Washington, D.C., DOE-EIS-0046-D, (1979), Volume 1, Chapter 3.3.Google Scholar
6. Sizgek, G.D., Investigation of Conjugate Heat Transfer in Interim Storage of High Level Radioactive Waste, Fundamentals of Combined Mode Heat Transfer, edited by Witte, L. C., Proceedings of The ASME, HTD-Vol 364–1, (1999), pp. 61–68.Google Scholar
7.Report of a Technical Committee on Effects of heat from High-Level Waste on the Performance of deep Geological repository Components, IAEA-TECDOC-319, Stockholm, (1983).Google Scholar
8. CFX4.2 Flow solver user guide, Computational Fluid Dynamics Services, Harwell, UK, (1997).Google Scholar
9. Admissible thermal loading in Geological formations consequences on radioactive waste disposal methods, Nuclear Science and Technology, EUR-8179 EN/FR, Vol. 1, (1982).Google Scholar
10. Bodenes, J.M., Dewiere, L., and Oustriere, P., Modelling heat transfer near a deep underground repository: A discussion of boundary conditions, (ModelCARE90, Proceedings of the conference held in The Hague, 1990), pp. 373–384.Google Scholar