Hostname: page-component-586b7cd67f-gb8f7 Total loading time: 0 Render date: 2024-11-29T07:48:13.718Z Has data issue: false hasContentIssue false
  • English
  • Français

Texture Variations in Sol-Gel Derived PZT Films on Substrates with Platinum Metallization

Published online by Cambridge University Press:  15 February 2011

J.G.E. Gardeniers ,
M. Elwenspoek  and
C. Cobianu
J.G.E. Gardeniers
Affiliation:
MESA Research Institute, P.O. Box 217, NL-7500 AE Enschede, The Netherlands
M. Elwenspoek
Affiliation:
MESA Research Institute, P.O. Box 217, NL-7500 AE Enschede, The Netherlands
C. Cobianu
Affiliation:
Center of Microtechnology, Bucharest, Romania.
Get access

Abstract

Metalorganic precursor solutions of composition Zr : Ti = 0.53 : 0.47 were used to spin-cast PZT layers on sputtered Pt films. After annealing at temperatures of 550 °C - 800 °C, the PZT films of tetragonal perovskite structure reproducibly showed different textures and surface morphologies, depending on whether or not a Ti layer was used as an adhesion layer for the Pt film. The texture differences were found to be independent of annealing treatment. It is argued that the observed texture differences are caused by a change in Pt-PZT interface composition, resulting from the diffusion of Ti into the Pt film during annealing; X-ray diffraction of an annealed Pt/Ti/SiO2/Si film combination provided evidence for a compound Pt3Ti. Annealing at 850 °C caused severe diffusion of Ti from the metal layer into the PZT film, leading to a tetragonal PZT layer with lattice constants corresponding to a Zr : Ti ratio of 30 : 70.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 343: Symposium H – Polycrystalline Thin Films - Structure, Texture, Properties and Applications , 1994 , 451
Copyright
Copyright © Materials Research Society 1994

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Udayakumar, K.R., Chen, J., Krupanidhi, S.B. and Cross, L.E., Proc. 7th Int. Symp. Appl. Ferroel., Urbana-Champaign, June 6–8, 1990, p.741.Google Scholar
2. Gardeniers, J.G.E. and Cobianu, C., submitted to J. Appl. Phys.Google Scholar
3. Martin, F.W., Phys. Chem. Glasses 6, 143 (1965).Google Scholar
4. Tuttle, B.A., Schwartz, R.W., Doughty, D.H. and Voigt, J.A., Ferroelectric Thin Films, Mater. Res. Soc. Proc. 200, 159 (1990)CrossRefGoogle Scholar
5. Jaffe, B., Roth, R.S. and Marzullo, S., J. Res. Nat. Bur. Stds. 55, 239 (1955).CrossRefGoogle Scholar
6. Hyde, B.G. and Andersson, S., Inorganic crystal structures. J. Wiley & Sons, New York (1989).Google Scholar
7. Chapin, L.N. and Myers, S.A., Ferroelectric Thin Films. Mater. Res. Soc. Proc. 200, 153 (1990)CrossRefGoogle Scholar
8. Sreenivas, K., Reaney, I., Maeder, T., Setter, N., Jagadish, C. and Elliman, R.G., J. Appl. Phys. 75,232(1994).CrossRefGoogle Scholar