Hostname: page-component-586b7cd67f-dsjbd Total loading time: 0 Render date: 2024-11-25T17:35:16.779Z Has data issue: false hasContentIssue false
  • English
  • Français

Testing of Fracture Resistance of Materials

Published online by Cambridge University Press:  26 February 2011

Beta Y. Ni ,
T. Y. Zhang  and
J. C. M. Li
Beta Y. Ni
Affiliation:
Materials Science Program, Department of Mechanical Engineering, University of Rochester, Rochester, NY 14627.
T. Y. Zhang
Affiliation:
Materials Science Program, Department of Mechanical Engineering, University of Rochester, Rochester, NY 14627.
J. C. M. Li
Affiliation:
Materials Science Program, Department of Mechanical Engineering, University of Rochester, Rochester, NY 14627.
Get access

Abstract

Both energy and load required to fracture the material are important quantities and they are not necessarily related to each other as suggested by the fracture mechanics of brittle materials. For example, the difference of the failure behavior between the semi-brittle ABS polymer and the ductile Al 6061-TO can be well characterized by a pre-fracture energy E0 (Joule/m) and a fracture energy Ef (Joule/m2 ). Al 6061-TO has much higher values of E0 and EF than the ABS polymer. This accounts for the ductility of Al 6061-TO. However, the applied stress intensity factor KIapp for both materials are similar. The reason is that their plastic zones have similar shielding effects, even though Aluminum has dislocations and the ABS polymer has cavities and crazes.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 226: Symposium H – Mechanical Behavior of Materials and Structures in Microelectronics , 1991 , 383
Copyright
Copyright © Materials Research Society 1991

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1 Breuer, H. et al. , J. Macromol. Sci.-Phys., B14(3)(1977) 387.Google Scholar
2 Kinloch, A. J. et al. , Polymer, 24(1983) 1341.Google Scholar
3 Parker, D. S. et al. , Polymer, 31(1990) 2267.Google Scholar
4 Chen, C. C., Sauer, J. A., J. Applied Polymer Science, 40(1990)503.Google Scholar
5 Ni, Beta Y., Zhang, T. Y., Li, J. C. M., J. Mater. Res., in press.Google Scholar
6 Kinloch, A. J., Shaw, S. J., Polymer, 24(1983) 1355.Google Scholar
7 Ni, Beta Y., Li, J. C. M., and Berry, V. K., Polymer, in press.Google Scholar
8 Ni, Beta Y., Li, J. C. M., MRS Proceeding “Defects in Materials”, 1990.Google Scholar
9 Ohr, S. M., Mater. Sci. and Eng., 72(1985) 1.Google Scholar
10 Ewalds, H. L., Wanhill, R. J. H., Fracture Mechanics, published by Hodder &Stronghton Limited, 1984.Google Scholar