Hostname: page-component-78c5997874-m6dg7 Total loading time: 0 Render date: 2024-11-09T05:28:15.792Z Has data issue: false hasContentIssue false

Tantalum Nitride Seed Layers for Bcc Tantalum Coatings Deposited on Steel by Magnetron Sputtering

Published online by Cambridge University Press:  11 February 2011

Anamika Patel
Affiliation:
Dept. of Electrical Engineering, New Jersey Institute of Technology, Newark, NJ.
Leszek Gladczuk
Affiliation:
Dept. of Electrical Engineering, New Jersey Institute of Technology, Newark, NJ.
Charanjeet Singh Paur
Affiliation:
Dept. of Electrical Engineering, New Jersey Institute of Technology, Newark, NJ.
Marek Sosnowski
Affiliation:
Dept. of Electrical Engineering, New Jersey Institute of Technology, Newark, NJ.
Get access

Abstract

Tantalum, a tough refractory metal with excellent corrosion resistance, is an attractive protective coating material for steel subjected to mechanical wear in harsh chemical environments. The coatings deposited by sputtering usually contain a hard and brittle tetragonal phase mixed with the desirable tough and ductile bcc phase of Ta. One of the methods of promoting the growth of the bcc phase at a moderate substrate temperature is deposition of an interfacial or seed layer of tantalum nitride. Ta coatings were deposited by dc magnetron sputtering in argon, and the interfacial nitride layers by reactive sputtering performed in the same chamber with nitrogen gas added to argon. The critical thickness, stoichiometry, and structure of the seed layer required for bcc Ta growth were studied by scanning electron microscopy and X-ray diffraction. The results of adhesion testing of the Ta coatings deposited on the interfacial layers are also reported.

Type
Research Article
Copyright
Copyright © Materials Research Society 2003

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1] Matson, D.W., McClannahan, E.D., Rice, J.P., Lee, S.L., Windover, D., Surf. Coat. Technol. 133–134, pp. 411, 2000.Google Scholar
[2] Marcus, R.B. and Quigley, S., Thin Solid Films 2, pp. 467, 1968.Google Scholar
[3] Face, D.W. and Prober, D.E., Journ. Vac. Sci. Technol. A 5(6), pp. 3408, 1987.Google Scholar
[4] Chen, G.S., Chen, S.T., Huang, S.C. and Lee, H.Y., App. Sur. Sci. 169–170, pp. 353, 2001.Google Scholar
[5] Colgan, E.G. and Fryer, P.M., US Patent # 5,221,449Google Scholar
[6] Edelstein, D. et al., Journ. Elect. Dev. Meeting, Tech. Dig., pp. 773, 1997 Google Scholar
[7] Patel, A., Gladczuk, L., Paur, C. and Sosnowski, M., Mat. Res. Soc. Symp. Proc. Vol. 697, pp. 5.6.1, 2002.Google Scholar
[8] Schauer, A. and Roschy, M., Thin Solid Films 12, pp.313, 1972.Google Scholar
[9] JCPDS-ICDD File Card No. 26–985.Google Scholar
[10] JCPDS-ICDD File Card No. 39–1485.Google Scholar
[11] JCPDS-ICDD File Card No. 32–1283.Google Scholar