Hostname: page-component-cd9895bd7-gxg78 Total loading time: 0 Render date: 2024-12-27T02:31:24.943Z Has data issue: false hasContentIssue false
  • English
  • Français

Synthesis of Titania Powder by Titanium Tetrachloride Oxidation in an Aerosol Flow Reactor

Published online by Cambridge University Press:  25 February 2011

M. Kamal Akhtar ,
Yun Xiong  and
Sotiris E. Pratsinis
M. Kamal Akhtar
Affiliation:
Center for Aerosol Processes, Department of Chemical Engineering, University of Cincinnati, Cincinnati, OH 45221
Yun Xiong
Affiliation:
Center for Aerosol Processes, Department of Chemical Engineering, University of Cincinnati, Cincinnati, OH 45221
Sotiris E. Pratsinis
Affiliation:
Center for Aerosol Processes, Department of Chemical Engineering, University of Cincinnati, Cincinnati, OH 45221
Get access

Abstract

Vapor phase synthesis of titania particles by oxidation of titanium tetrachloride (TiCI4) was studied in an aerosol reactor between 1200 K and 1723 K. The effect of process variables (reactor residence time, temperature, reactant concentration) on powder size and phase characteristics was investigated using the differential mobility particle sizer, scanning electron microscopy and X-ray diffraction. The morphology of the particles remained unchanged under the process conditions investigated; titania particles were primarily anatase though the rutile weight fraction increased with increase in reactor temperature. The geometric number average diameter of the particles was between 0.13 µm and 0.35 [m and the geometric standard deviation of the particle size distribution was about 1.4. The average particle size increased with increasing temperature, TiCI4 concentration and residence time. The observed changes in the particle size distribution were compared with those predicted by solving the aerosol dynamic equation by a sectional method and accounting for coagulation and first order chemical reaction.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 249: Symposium Q – Synthesis and Processing of Ceramics: Scientific Issues , 1991 , 139
Copyright
Copyright © Materials Research Society 1992

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

Friedlander, S. K., Smoke, Dust and Haze, John Wiley and Sons, New York (1977).Google Scholar
Kingery, W. D., Bowen, H. K. and Uhlmann, D. R., Introduction to Ceramics. 2nd ed. (Wiley, New York, 1976), Chapter 13 (1976).Google Scholar
Kobata, A., Kusakabe, K. and Morooka, S., AIChE J., 37, 347 (1991).CrossRefGoogle Scholar
MacKenzie, K. J. D., Trans. J. Brit. Ceram. Soc., 74,77 (1975).Google Scholar
Okuyama, K., Kousaka, Y. and Hayashi, K., J. Colloid Interface Science, 101 98 (1984).CrossRefGoogle Scholar
Pratsinis, S. E., Bai, H., Biswas, P., Frenklach, M. and Mastrangelo, S. V. R., J. Amer. Ceramic Soc., 73, 2158 (1990).Google Scholar
Rice, R. W., AIChE J., 36, 481 (1990).CrossRefGoogle Scholar
Rogak, S. N., Baltensperger, U. and Flagan, R. C., Aerosol Science and Technology, 14, 447 (1991).CrossRefGoogle Scholar
Suyama, Y. and Kato, A., J. Amer. Ceramic Soc., 59, 146 (1976).Google Scholar
Xiong, Y. and Pratsinis, S. E., J. Aerosol Sci., 22, 637 (1991).CrossRefGoogle Scholar