Hostname: page-component-78c5997874-94fs2 Total loading time: 0 Render date: 2024-11-17T16:12:01.823Z Has data issue: false hasContentIssue false
  • English
  • Français

Synthesis and Characterization of LiNiO2 as A Cathode Material for Pulse Power Batteries

Published online by Cambridge University Press:  10 February 2011

H. S. Choe  and
K. M. Abraham
H. S. Choe
Affiliation:
EIC Laboratories, Inc., 111 Downey Street, Norwood, MA 02062, USA
K. M. Abraham
Affiliation:
EIC Laboratories, Inc., 111 Downey Street, Norwood, MA 02062, USA
Get access

Abstract

The optimum conditions for preparing LiNiO2 with good electrochemical performance are presented. Three different methods were investigated:

• LiOH and NiO at700°C in air(Batch A),

• LiOH and NiO between 150 and 750 °C in oxygen (Batch B), and

• LiNO3 and NiCO3 between 600 and 750 °C in oxygen (Batch C).

Batch C exhibited the highest first discharge capacity of about 150 mAh/g between 2.0 and 4.0V with a solid state Li/LiNiO2 cell containing a PAN-based polymer electrolyte. Solid state carbon/LiNiO2 cells and two-cell bipolar batteries demonstrated high rate capabilities at room temperature with an ability to sustain pulsed discharge currents as high as 50 mA/cm2. About 22 500,13 000, and 1000 pulses were obtained at current densities of 10, 20, and 50 mA/cm2, respectively, with a 10 ms pulse width followed by a 50 ms interpulse rest period.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 496: Symposium Y – Materials For Electrochemical Energy Storage & Conversion II… , 1997 , 303
Copyright
Copyright © Materials Research Society 1998

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Morales, J., Peres-Vicente, C., and Tirado, J., Mater. Res. Bull., 25, 623 (1990).10.1016/0025-5408(90)90028-ZGoogle Scholar
2. Moshtev, R.V., Zlatilova, P., Manev, V., Sato, A., J. Power Sources, 54, 329 (1995);10.1016/0378-7753(94)02094-JGoogle Scholar
Yamada, S., Fujiwara, M., and Kanda, M., J. Power Sources, 54, 209 (1995).10.1016/0378-7753(94)02068-EGoogle Scholar
3. Ohzuku, T., Ueda, A., and Nagayama, M., J. Electrochem. Soc., 140, 1862 (1993).Google Scholar
4. Powder Diffraction Files, Joint Committee on Powder Diffraction Standards, Swarthmore, PA (1975).Google Scholar