Hostname: page-component-586b7cd67f-dlnhk Total loading time: 0 Render date: 2024-11-25T17:25:39.441Z Has data issue: false hasContentIssue false
  • English
  • Français

Surface Film Softening Effects in Mosi2

Published online by Cambridge University Press:  01 January 1992

C. M. Czarnik ,
R. Gibala ,
M.A. Nastasi ,
R. B. Schwarz ,
S. R. Srinivasan  and
J. J. Petrovic
C. M. Czarnik
Affiliation:
The University of Michigan, Department of Materials Science and Engineering, Ann Arbor, MI 48109-2136
R. Gibala
Affiliation:
The University of Michigan, Department of Materials Science and Engineering, Ann Arbor, MI 48109-2136
M.A. Nastasi
Affiliation:
Los Alamos National Laboratory, Los Alamos, NM 87545
R. B. Schwarz
Affiliation:
Los Alamos National Laboratory, Los Alamos, NM 87545
S. R. Srinivasan
Affiliation:
Los Alamos National Laboratory, Los Alamos, NM 87545
J. J. Petrovic
Affiliation:
Los Alamos National Laboratory, Los Alamos, NM 87545
Get access

Abstract

Surface film softening, which is associated with the generation of mobile dislocations at a film-substrate interface and their motion into the substrate, has been demonstrated previously for bcc metals and B2 ordered alloy substrates. MoSi2 exhibits features of limited dislocation mobility and plasticity similar to these materials and would also be expected to exhibit film-enhanced plasticity, but at much higher temperatures. In this investigation, 150 nm thick films of SiO2, MoSi2 and ZrO2 were deposited on MoSi2 substrates by electron beam deposition at ∼50°C in an attempt to observe film softening. In initial experiments, hot hardness testing was utilized primarily to maintain deformation conditions characteristic of dislocation glide. ZrO2-coated MoSi2 demonstrates a large film-induced softening in hardness tests carried out at 0.5 - 1 kgf loads over the temperature range 25 - 1300°C.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 288: Symposium L – High-Temperature Ordered Intermetallic Alloys V , 1992 , 597
Copyright
Copyright © Materials Research Society 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Aikin, R.M. Jr. Scripta Metall. Mater. 26, 1025 (1992).Google Scholar
2. Vasudevan, A.K. and Petrovic, J.J., Mater. Sci. Eng. A155, 1 (1992).Google Scholar
3. Noebe, R.D. and Gibala, R., Structure and Deformation of Boundaries, Subramanian, K. and Iman, M.S., eds., TMS-AIME, Warrendale, PA, p. 89, 1986.Google Scholar
4. Noebe, R.D. and Gibala, R., Scripta Metall. 20, 1635 (1986).Google Scholar
5. Bowman, K.J., Hartfield-Wünsch, S.E. and Gibala, R., Scripta Metall. Mater. 26, 1529 (1992).Google Scholar
6. Umakoshi, Y., Sakagami, T., Hirano, T. and Yamane, T., Acta Metall. Mater. 38, 909 (1990).Google Scholar
7. Maloy, S.A., Heuer, A.H., Lewandowski, J.J. and Mitchell, T.E., Acta Metall. 40, 3159 (1992).Google Scholar
8. Schwarz, R.B., Srinivasan, S.R., Petrovic, J.J. and Maggiore, C.J., Mater. Sci. Eng. A155, 75 (1992).Google Scholar
9. Petrovic, J.J., Bhattacharya, A.K., Honnell, R.E., Mitchell, T.E., Wade, R.K. and McClellan, K.J., Mater. Sci. Eng. A155, 259 (1992).Google Scholar
10. Boldt, P.H., Embury, J.D. and Weatherly, G.C., Mater. Sci. Eng. A155, 251 (1992).Google Scholar
11. Li, W.B., Henshall, J.L., Hooper, R.M. and Easterling, K.E., Acta Metall. Mater. 39, 3099 (1991).Google Scholar