Hostname: page-component-586b7cd67f-gb8f7 Total loading time: 0 Render date: 2024-11-26T17:14:59.820Z Has data issue: false hasContentIssue false
  • English
  • Français

Study on the Production of Silver/Modified Clay Nanocomposites

Published online by Cambridge University Press:  29 April 2013

Natália F. N. Pessanha  and
Gerson L. V. Coelho
Natália F. N. Pessanha
Affiliation:
Separation Process Laboratory, Department of Chemical Engineering, Federal Rural University of Rio de Janeiro, Seropédica, Rio de Janeiro, Brazil.
Gerson L. V. Coelho
Affiliation:
Separation Process Laboratory, Department of Chemical Engineering, Federal Rural University of Rio de Janeiro, Seropédica, Rio de Janeiro, Brazil.
Get access

Abstract

The aim of this study was to investigate the application of modified clay as a support in the synthesis of silver nanoparticles. Silver nitrate (AgNO3) was used as the silver precursor in several concentrations (0.005 M, 0.01 M, 0.02 M, 0.05 M, and 0.1 M) to obtain Ag-MMT purified and modified clay nanocomposites. The properties of nanocomposites were also studied as a function of the concentration of the reducing agent, sodium borohydride (NaBH4). It was observed through X-ray Diffraction that the MMT purified structure was gradually exfoliated with increased concentrations of AgNO3, while the modified clay structure remained intact. As observed through UV-vis spectra, samples of Ag+-MMT were reduced with NaBH4 to produce Ago and its particle diameter is dependent on the concentration of NaBH4.

Keywords

adsorptionnanoscaleAg
Type
Articles
Information
MRS Online Proceedings Library (OPL) , Volume 1547: Symposium M – Solution Synthesis of Inorganic Functional Materials—Films, Nanoparticles and Nanocomposites , 2013 , pp. 167 - 172
Copyright
Copyright © Materials Research Society 2013 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

CHAMBERS, C. W., PROCTOR, C. M., KABLER, P. W., J Am Water Works Assoc, 208-216 (1962).CrossRefGoogle Scholar
GUGGENBICHLER, J. P., BOSWALD, M, LUGAUER, S., KRALL, T., J Infect, S16-S23 (1999).CrossRefGoogle Scholar
DASTJERDI, R., MONTAZER, M., Coll. Surf. B, 79, 5–18 (2010).CrossRefGoogle Scholar
SANTOS, P. S., Ciência e Tecnologia de Argilas, 2nd ed., vol. 1 (Edgard Blucher Ltda, S. Paulo, SP, 1989).Google Scholar
COELHO, G. L. V., AUGUSTO, F., PAWLISZYN, J., Ind. Eng. Chem. Res., 40, 364–368 (2001).CrossRefGoogle Scholar
PRAUS, P., TURICOVÁ, M., VALÁŠKOVÁ, M., J. Braz. Chem. Soc, 19, 549–556 (2008).CrossRefGoogle Scholar
MADEJOVÁ, J., JANEK, M., KOMADEL, P, HERBERT, H. J., MOOG, H. C., Appl Clay Sci, 20, 255–271 (2002).CrossRefGoogle Scholar
PAIVA, L. B., MORALES, A. R., DÍAZ, F. R. V., Appl Clay Sci, 42, 8–24 (2008).CrossRefGoogle Scholar
HONGPING, H., RAY, F. L., JIANXI, Z., Spectrochim. Acta, Part B, 60, 2853–2859 (2004).CrossRefGoogle Scholar
SOLOMON, S., BAHADORY, M, JEYARAJASINGAN, A., UTKOWSKY, S, BORITZ, C., J. Chem. Educ, 84, 322–325 (2007).Google Scholar