Hostname: page-component-586b7cd67f-tf8b9 Total loading time: 0 Render date: 2024-11-29T07:24:55.894Z Has data issue: false hasContentIssue false

Study of The Microstructure and Oxidation of NbSi2 Base Alloys

Published online by Cambridge University Press:  22 February 2011

S.H. Pitman
Affiliation:
Department of Material Science and Engineering, University of Surrey, Guildford, GU2 5XH, United Kingdom
P. Tsakiropoulos
Affiliation:
Department of Material Science and Engineering, University of Surrey, Guildford, GU2 5XH, United Kingdom
Get access

Abstract

The microstructures of arc melted ingots and melt spun ribbons of NbSi2 and NbSi2-(8,20 at%)Cr alloys are discussed. Rapid quenching from the melt refined the grain size of the alloys by two orders of magnitude and suppressed the formation of Nb5Si3 in Zone A of the binary alloy ribbons. In the ternary alloy ingots and ribbons formation of the Nb5Si3 was suppressed, and the C40 NbSi2 and CrSi2 and orthorhombic Nb2Si6Cr3 phases were formed. Zone A was not formed in the ribbons of the ternary alloys. The microhardness of these phases and the oxidation behaviour of the alloys up to 1350°C in air and an Ar atmosphere are discussed. NbSi2 did not form a protective silica layer on oxidation. Instead a mixed oxide scale of silica and α-Nb2O5 formed which cracked during growth of the oxide and hindered protection of the alloy. It is shown that the addition of Cr modifies the oxide to a duplex oxide of SiO2 and Cr2O3 and that the underlying matrix becomes depleted in Cr. Pest oxidation at 750°C was suppressed in Nb-60Si-20Cr.

Type
Research Article
Copyright
Copyright © Materials Research Society 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

[1] Nekkanti, R and Dimiduk, D M in Intermetallic Matrix Composites, eds Anton, D.L. et al (Mater. Res. Soc. Proc. 194, 1990) pp. 175182.Google Scholar
[2] Goldschmidt, H J, J. Institute of Metals, 87, 235 (1959).Google Scholar
[3] Priceman, S and Sama, L, in Refractory Metals and Alloys, ed Jaffee, R.I. (Gordon and Breach, New York, 1965), p. 959.Google Scholar
[4] Goldschmidt, H J and Brand, J A, J. Less-Common Metals 3(1), 34 (1961).Google Scholar
[5] Prokoshkin, D A and Vasil’eva, E V, in Alloys of Niobium, ed Samarin, A M, (Israel Program for Scientific Translations, Jerusalem, 1965), p. 100.Google Scholar
[6] Nakamura, M in JIMIS-6 Intermetallic Compounds, ed. Izumi, O, (Japan Institute of Metals, Sendai, 1991), pp.655659.Google Scholar
[7] Shah, D M and Anton, D L, in Structural Intermetallics, eds Darolia, R et al., (TMS, Warrendale, 1993) pp.755764.Google Scholar
[8] Fleischer, R L, in JIMIS-6 Intermetallic Compounds, ed. Izumi, O, (Japan Institute of Metals, Sendai, 1991) pp.157164.Google Scholar
[9] Grabke, H J and Brumm, M in Oxidation of High Temperature Intermetallics, eds Grobstein, T and Doychak, J, (TMS, Warrendale, 1989) pp.245255.Google Scholar
[10] Kieffer, R, Benesovsky, F. and Schroth, H., Metallkunde, Z., 44, 437 (1953).Google Scholar
[11] Rausch, J J, ARF 2981-4, Armour Research Foundation, NSA 15-31171, (1961).Google Scholar