Hostname: page-component-586b7cd67f-tf8b9 Total loading time: 0 Render date: 2024-11-29T07:39:47.569Z Has data issue: false hasContentIssue false
  • English
  • Français

Study of the Amorphous-to-Microcrystalline Transition during Silicon Film Growth at Increased Rates: Extensions of the Evolutionary Phase Diagram

Published online by Cambridge University Press:  17 March 2011

Andre S. Ferlauto ,
Pablo I. Rovira ,
Randy J. Koval ,
Christopher R. Wronski  and
Robert W. Collins
Andre S. Ferlauto
Affiliation:
Materials Research Laboratory and Center for Thin Film Devices, The Pennsylvania State University, University Park, PA 16802.
Pablo I. Rovira
Affiliation:
Materials Research Laboratory and Center for Thin Film Devices, The Pennsylvania State University, University Park, PA 16802.
Randy J. Koval
Affiliation:
Materials Research Laboratory and Center for Thin Film Devices, The Pennsylvania State University, University Park, PA 16802.
Christopher R. Wronski
Affiliation:
Materials Research Laboratory and Center for Thin Film Devices, The Pennsylvania State University, University Park, PA 16802.
Robert W. Collins
Affiliation:
Materials Research Laboratory and Center for Thin Film Devices, The Pennsylvania State University, University Park, PA 16802.
Get access

Abstract

The microstructural and phase evolution of silicon films (Si:H) prepared by low temperature (200°C) rf plasma-enhanced chemical vapor deposition (PECVD) with hydrogen dilution of silane has been studied using real time spectroscopic ellipsometry (RTSE) and atomic force microscopy (AFM). Both RTSE and AFM support the concept of an evolutionary phase diagram that describes different regimes of bulk layer thickness and H2-dilution ratio R within which predominantly amorphous silicon (a-Si:H) and microcrystalline silicon (μc-Si:H) films are obtained. In this study, the evolutionary phase diagram has been extended to identify four separate growth regimes: (i) a-Si:H with a smooth surface and a stable roughness layer thickness, (ii) a-Si:H with a rougher surface and an unstable roughness layer thickness, (iii) mixed-phase (a+μc)-Si:H, and (iv) fully-coalesced (single-phase) μc-Si:H. Based on this framework, the effect of increased rf power to achieve higher deposition rates in the rf PECVD process was investigated.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 609: Symposium A – Amorphous & Heterogeneous Silicon Thin Films – 2000 , 2000 , A2.2
Copyright
Copyright © Materials Research Society 2000

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Matsuda, A. and Tanaka, K., J. Non-Cryst. Solids 97&98, 1367 (1987).Google Scholar
2.See for example, Bennett, M., Rajan, K., and Kritikson, K., Conf. Record 23rd IEEE Photovoltaics Specialists Conference (IEEE, New York, 1993), p. 845.Google Scholar
3. Lu, Y., Kim, S., Gunes, M., Lee, Y., Wronski, C.R., and Collins, R.W., Mater. Res. Soc. Symp. Proc. 336, 595 (1994).Google Scholar
4. Tsu, D., Chao, B., Ovshinsky, S., Guha, S., and Yang, J., Appl. Phys. Lett. 71, 1317 (1997).Google Scholar
5. Koh, J., Lee, Y., Fujiwara, H., Wronski, C.R., and Collins, R.W., Appl. Phys. Lett. 73, 1526 (1998).Google Scholar
6. Koh, J., Ferlauto, A. S., Rovira, P. I., Wronski, C. R., and Collins, R. W., Appl. Phys. Lett. 75, 2286 (1999).Google Scholar
7. Collins, R. W., An, I., Fujiwara, H., Lee, J., Lu, Y., Koh, J., and Rovira, P. I., Thin Solid Films, 313–314, 18 (1998).Google Scholar
8. Li, Y.M., An, I., Nguyen, H.V., Wronski, C.R., and Collins, R. W., Phys. Rev. Lett. 68, 2814 (1992).Google Scholar
9. Ganguly, G. and Matsuda, A., Phys. Rev. B 47, 3661 (1993).Google Scholar
10. Rezek, B., Stuchlík, J., Fejfar, A., and Kocka, J., Appl. Phys. Lett. 74, 1475 (1999).Google Scholar
11. Takagi, T., Hayashi, R., Ganguly, G., Kondo, M., Matsuda, A., Thin Solid Films 345, 75 (1999).Google Scholar