Hostname: page-component-586b7cd67f-gb8f7 Total loading time: 0 Render date: 2024-11-29T09:25:35.579Z Has data issue: false hasContentIssue false
  • English
  • Français

Study Of Ta2O5 Based MOS Capacitors, With Tantalum Oxidized In O2:NH3 Ambient.

Published online by Cambridge University Press:  01 February 2011

Pallavi Krishnamoorthi  and
A N Chandorkar
Pallavi Krishnamoorthi
Affiliation:
Dept of Electrical Engineering, IIT Bombay, Powai, Mumbai, India. 400 076
A N Chandorkar
Affiliation:
Dept of Electrical Engineering, IIT Bombay, Powai, Mumbai, India. 400 076
Get access

Abstract

Tantalum Pentaoxide, an alternative to SiO2, as a high-k dielectric for DRAM and MOS applications, faces the problem of interface mismatch at silicon. SiO2 or Si3N4 interfacial layer could help in overcoming this problem. The higher band offsets of these materials also help in the reduction of leakage currents at low electric fields. Here we study the physical and electrical characteristics of Ta, oxidized in O2:NH3 ambient, and without any other interface layer. This is done to check if N/H moves to the interface, and thus improves the electrical properties. XRD studies of the film, showed the presence of Ta2O5. Peaks corresponding to TaSi2, un-oxidized tantalum and TaN were also found in the film. But the intensity of these peaks decreased with the reduction of NH3 content. Thus a higher oxygen content could reduce the content of TaN and unoxidized tantalum. FTIR analysis however showed strong Ta=O and Si-O peaks. For the MOS capacitors, due to the presence of resistive components, the maximum capacitance was reduced, compared to that of pure Ta2O5 films. Oxide charges in the films were observed to be around 1.9E10 cm-2. But the traps in these films were found to be almost negligible as observed from the negligible hysteresis in the C-V characteristics. Films with N/H showed lesser oxide charges by an order of magnitude, as compared to pure Ta2O5 films.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 716: Symposium B – Silicon Materials-Processing, Characterization, and Reliability , 2002 , B11.15
Copyright
Copyright © Materials Research Society 2002

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Neumueller, W, Alsmeier, J, Bronner, G, Ishibashi, S, Kiose, H, IBM Semiconductor Research and Development Center, Hopewell Junction, New York, (Aug 2000)Google Scholar
2. Gallias, P., Hantzpergue, J J, Remy, J C, Roptin, D, Thin Solid Films, 165 (1988), pp. 237–241,Google Scholar
3. Devoivre, T., Papadas, C., Setton, M, 1999 Symposium on VLSI Technology, (1999) pp.131–132,Google Scholar
4. Reisinger, H., Steinlesberger, G, Jakschik, S, Gutsche, M, Hecht, T, Leonhard, M, Schroder, U, Seidl, H, IEDM 2001, pp.267–270,Google Scholar
5. Jung, H., Im, K., Yang, D. and Hwang, H., IEEE Electron Device Letters, Vol. 21, No.12, (2000), pp 563–565 Google Scholar
6. Gusev, E.P., Lu, H. C., Garfunkel, E.L., Gustafsson, T., Green, M.L., IBM 1999,Google Scholar
7. Lee, H. J., Sinclair, R., Lee, M B., Lee, H D., Journal of Applied Physics, 83(1), (Jan 1998), pp.139–144,Google Scholar
8. Ghodsi, F E, Tepehan, F Z, Tepehan, G G, Thin Solid Films, 295 (1997), pp.11–15,Google Scholar
9. Ono, H., Hosokawaa, Y, Shinodaa, K, Koyanagub, K, Yamaguchib, H, Thin Solid Films, Vol 381, issue 1, (Jan 2001), pp.57–61,Google Scholar
10. Pignolet, A., Rao, G M, Krupanidhi, S B, Thin Solid Films, 258 (1995), pp.230–235,Google Scholar
11. Krishnamoorthi, Pallavi and Chandorkar, A N, Proceedings of the Eleventh International Workshop on the Physics of Semiconductor Devices, (2001), Vol 2, pp.1307–1309.Google Scholar