Hostname: page-component-848d4c4894-pjpqr Total loading time: 0 Render date: 2024-07-07T19:53:39.740Z Has data issue: false hasContentIssue false
  • English
  • Français

Structure, Characteristics, and the Application of Phosphorus Doped Hydrogenated Microcrystalline Silicon

Published online by Cambridge University Press:  25 February 2011

S. J. Jeng ,
D. E. Kotecki ,
J. Kanicki ,
C. C. Parks  and
J. Tien
S. J. Jeng
Affiliation:
IBM, Semiconductor Development Laboratory, Hopewell Junction, NY 12533
D. E. Kotecki
Affiliation:
IBM, Semiconductor Development Laboratory, Hopewell Junction, NY 12533
J. Kanicki
Affiliation:
IBM, Semiconductor Development Laboratory, Hopewell Junction, NY 12533
C. C. Parks
Affiliation:
IBM, Semiconductor Development Laboratory, Hopewell Junction, NY 12533
J. Tien
Affiliation:
IBM, Semiconductor Development Laboratory, Hopewell Junction, NY 12533
Get access

Abstract

The microstructure, electrical, and optical properties of in situ phosphorus doped hydrogenated macrocrystalline silicon (μc-Si:H:P) films are strongly affected by deposition parameters and subsequent thermal processes. μc-Si:H:P films with thickness ranging Trom 200 to lOOOÅ have been deposited on Si and SiO2 substrates. The μc-Si:H:P film is best deposited at 200°C in terms of structure, and H and P content. In this film, microcrystallites arc embedded in an amorphous matrix and have a volume fraction of ≃85%. The band-gap of the film is 1.8 eV. In this paper, the materials and processing issues of μc-Si:H:P deposited in a parallel plate RF plasma and in a downstream RF plasma chemical deposition reactor have been studied using HRTEM, SIMS, electrical, and optical measurements.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 242: Symposium G – Wide Band-Gap Semiconductors , 1992 , 693
Copyright
Copyright © Materials Research Society 1992

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Kroemer, H., Proc. IRE, 45 1535 (1957).Google Scholar
2. Mertens, R., Nijs, J., Symons, J., Baerf, K., and Ghannam, M., Solid State Devices Proceedings of the 17th European Solid State Device Research Conference in 1987 (North-Holland, Amsterdam, Netherlands, 1988), pp. 697–701.Google Scholar
3. Fujioka, Hiroshi, and Takasaki, Kanetake, Fujitsu Sci. Tech. J., 24 391 (1988).Google Scholar
4. Sugii, T., Yamazaki, T., Suzuki, Z., and Ito, T., IEDM Tech. Dig. 89, pp. 659–662, 1989.Google Scholar
5. Kern, W. and Puotinen, D. A., RCA Rev. 31. 187 (1970).Google Scholar
6. Johnson, N. M., Walker, J., Doland, C. M., Winer, K., and Street, R. A., Appl. Phys. Lett., 54 1872 (1989).Google Scholar
7. Kanicki, J., Hasan, E., Griffith, J., Takamori, T., and Tsang, J. C., Mater. Res. Soc. Symp., 149 239 (1989).Google Scholar