Hostname: page-component-586b7cd67f-2brh9 Total loading time: 0 Render date: 2024-11-29T09:44:33.526Z Has data issue: false hasContentIssue false
  • English
  • Français

Structural Transitions in Titanium/Amorphous-Silicon Multilayers

Published online by Cambridge University Press:  25 February 2011

E. Ma ,
L.A. Clevenger ,
C.V. Thompson ,
R.R. DeAvillez  and
K.N. Tu
E. Ma
Affiliation:
Department of Materials Science and Engineering, Massachusetts Institute of Technology, Cambridge, MA 02139
C.V. Thompson
Affiliation:
Department of Materials Science and Engineering, Massachusetts Institute of Technology, Cambridge, MA 02139
R.R. DeAvillez
Affiliation:
Departmento de Ciencia dos Materiais e Metalurgia, Pontificia Universidade Catolica, 22452-Rio de Janeiro, RJ-Brazil
K.N. Tu
Affiliation:
IBM T.J. Watson Research Center, Yorktown Heights, NY 10598
Get access

Abstract

We report a quantitative investigation of silicidation in Ti/amorphous-Si thin-films using Differential Scanning Calorimetry (DSC), thin-film X-ray diffraction and Cross-sectional Transmission Electron Microscopy (XTEM). Multilayered thin films were used to facilitate calorimetric observation of the heat released or absorbed at many reacting interfaces. It is shown that calorimetric analysis, combined with structural analysis using X-ray diffraction and XTEM, is effective in providing both kinetic and thermodynamic information about interdiffusion reactions in thin films. The present paper describes experimental results for multilayers with an atomic concentration ratio of 1 Ti to 2 Si and modulation periods ranging from 10 to 60 nm. A thin amorphous titanium suicide layer was found to exist between the as-deposited Ti and a-Si layers. Heating the multilayer film caused the amorphous Ti-silicide to grow over a broad temperature range by an exothermic reaction. An endothermic relaxation occurs during the late stage of amorphous suicide growth. Heating to temperatures over 800K causes C49-TiSi2 to form at the a-si1icide/a-Si interface. Temperatures at which all the above structural transitions occur vary with modulation period. Analysis of the DSC data indicates an activation energy of 3.1 eV for the formation of C49-TiSio, which is attributed to both the nucleation and the early growth of the suicide. The heat of formation for C49-TiSi2 from a reaction of a-silicide and a-Si was found to be -30±5KJ/mol. Nucleation appears to be the controlling step in C49-TiSi2 formation.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 163: Symposium G – Impurities, Defects and Diffusion in Semiconductors: Bulk and Layered Structures , 1989 , 961
Copyright
Copyright © Materials Research Society 1990

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1 Murarka, S.P., Suicides for VLSI Applications, (Academic Press, New York, 1983)Google Scholar
2 Holloway, K. and Sinclair, R., J. Appl. Phys. 61, 1359 (1987).Google Scholar
3 Clevenger, L.A., Thompson, C.V., Cammarata, R.C. and Tu, K.N., Appl. Phys. Lett. 52, 795 (1988).Google Scholar
4 Clevenger, L.A., Thompson, C.V., Judas, A. and Tu, K.N., First International Meeting on Advanced Materials 10, 431 (1989).Google Scholar
5 Clevenger, L.A., DeAvillez, R.R., Thompson, C.V. and Ma, E., J. Vac. Sci. Technol. in press.Google Scholar
6 DeAvillez, R.R., Clevenger, L.A., Thompson, C.V. and Tu, K.N., J. Mater. Res. in press.Google Scholar
7 Beyers, R. and Sinclair, R., J. Appl. Phys. 57, 5240 (1985).Google Scholar
8 Kissinger, H.E., Analyt. Chem. 29, 1702 (1957); P.G. Boswell, J. Ther. Anal. 18, 353 (1980).Google Scholar
9 Hung, L.S., Gyulai, J., Mayer, J.H., Lau, S.S. and Nicolet, M-A., J. Appl. Phys. 54, 5076 (1983).Google Scholar
10 DeAvillez, R.R., Clevenger, L.A. and Thompson, C.V., J. Mater. Res. 4 (5), 1057 (1989).Google Scholar
11 Hultgren, R., Orr, R.L., Anderson, P.O. and Kelly, K., Selected Values of Thermodynamic Properties of Metals and Alloys, (J. Niley, New York, 1963).Google Scholar
12 Donovan, E.P., Spaepen, F., Turnbull, D., Poate, J.M. and Jacobson, D., J. Appl. Phys. 57, 1795 (1985).Google Scholar