Hostname: page-component-586b7cd67f-dlnhk Total loading time: 0 Render date: 2024-11-26T20:27:09.401Z Has data issue: false hasContentIssue false

SrxBa(1−x)TiO3 Thin Films for Active Microwave Applications

Published online by Cambridge University Press:  15 February 2011

J.S. Horwitz
Affiliation:
Naval Research Laboratory, Washington D.C.
J.M. Pond
Affiliation:
Naval Research Laboratory, Washington D.C.
B. Tadayan
Affiliation:
Naval Research Laboratory, Washington D.C.
R.C.Y. Auyeung
Affiliation:
Sachs-Freeman Associates, Landover, MD
P.C. Dorsey
Affiliation:
Naval Research Laboratory, Washington D.C.
D.B. Chrisey
Affiliation:
Naval Research Laboratory, Washington D.C.
S.B. Qadri
Affiliation:
Naval Research Laboratory, Washington D.C.
C. Muller
Affiliation:
Superconducting Core Technologies, Golden, CO.
Get access

Abstract

The dielectric constant, loss tangent and Curie temperature for SrxBa(1−x)TiO3 (SBT) thin films with x = 0.2 – 0.8 have been investigated at microwave frequencies. SBT films (0.5 -3 μm thick) were grown on (100) MgO and LaAlO3 substrates by pulsed laser deposition at substrate temperatures from 850 – 900 °C in 0.35 Torr of oxygen. Deposited ferroelectric films were single phase, highly oriented, and characterized by x-ray rocking curve widths of < 0.5°. Highly oriented SBT films with x-ray rocking curve widths of 72 arc seconds were observed. In general, the thin film dielectric constant at microwave frequencies is low (200–950) compared to the reported bulk value, but strongly dependent on the Sr/Ba ratio. Biasing of a ferroelectric interdigital capacitor (< 200 kV/cm) produces a change in the dielectric constant which resulted in a phase shift in the reflected signal (S11) measured as a function of frequency from 100 MHz to 10 GHz. The dielectric loss tangent measurement, as measured at room temperature and 9.2 GHz, ranges from 0.1 to 1.2 × 10−3 and depends on the Sr/Ba ratio. These data show that SBT thin films are suitable for the development of frequency tunable microwave circuits and components.

Type
Research Article
Copyright
Copyright © Materials Research Society 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Elmer, F.J., Jang, S.J., Army Science Conference Proceedings, 283 (1988).Google Scholar
2. Varadan, V.K., Gohdgaonkar, D.K., Varadan, V.V., Kelly, J.F. and Glikerdas, P., Microwave Journal, Jan. 116 (1992).Google Scholar
3. Carroll, K.R., Pond, J.M., Chrisey, D.B., Horwitz, J.S., Leuchtner, R.E., Appl. Phys. Lett., 62 1845 (1993).Google Scholar
4. Chrisey, D.B., Horwitz, J.S., Pond, J.M., Carroll, K.R., Lubitz, P., Grabowski, K.S. and Leuchtner, R.E., IEEE Trans, on Applied Superconductivity, 3 1528 (1993).Google Scholar
5. Jackson, C.M., Kobayashi, J.H., Lee, A., Pettiette-Hall, C., Burch, J.F., Hu, R., Hilton, R., McDade, J., Microwave and Optical Tech. Lett. 5 722 (1992).Google Scholar
6. Gait, D., Price, J. C., Beai, J.A., Ono, R.H., Appl. Phys. Lett., 63 3078 (1993).Google Scholar
7. Babbit, R.W., Koscica, T.E., Drach, W.C., Microwave Journal, 35 63 (1992).Google Scholar
8. Horwitz, J.S., Chrisey, D.B., Pond, J.M., Auyeung, R.C.Y., Cotell, C.M., Grabowski, K.S., Dorsey, P.C. and Kluskens, M.S., Accepted for Publication, Integrated Ferroelectrics (1994).Google Scholar
9. Qadri, S.B., Horwitz, J.S., Chrisey, D.B., Auyeung, R.C.Y. and Grabowski, K.S., Accepted for Publication, Appl. Phys. Lett. (1995).Google Scholar