No CrossRef data available.
Published online by Cambridge University Press: 11 February 2011
Hydroxyapatite (HA) is a bone-like ceramic with good cytocompatibility properties and, consequently, has been used as coatings for dental and orthopedic implants. However, the main limitation of using HA as a coating material is its high calcium dissolution rate. The present study investigated an assortment of dopants in order to lower the calcium dissolution rate of HA. The HA dopants used in the present study were divalent (magnesium and zinc) and trivalent (yttrium, lanthanum, indium, and bismuth) cations. In a 21 day study, undoped HA and HA doped with magnesium (Mg), lanthanum (La), and bismuth (Bi) were found to increase in mass while formulations doped with zinc (Zn), indium (In), and yttrium (Y) were found to decrease in mass. Decreased mass may be due to loss of a number of chemical groups (such as calcium, phosphorous, and hydroxyl groups). Studies were also performed to specifically evaluate calcium dissolution. The divalent and trivalent-doped HA averaged samples had calcium concentrations in the supernatant consistently below the undoped HA samples suggesting lower calcium dissolution rate for all doped formulations. The results of the present study demonstrated that of those dopants tested that increased in mass, HA doped with Bi had the lowest amount of calcium released into the supernatant media. Since calcium has been shown to increase adsorption of proteins important for new bone growth, the present study provided evidence that to decrease the calcium dissolution rate of HA, dopants should be used, particularly Bi.