Hostname: page-component-586b7cd67f-gb8f7 Total loading time: 0 Render date: 2024-11-25T15:15:48.025Z Has data issue: false hasContentIssue false
  • English
  • Français

Solid Freeform Fabrication of Silicon Nitride Ceramics

Published online by Cambridge University Press:  10 February 2011

C. J. Gasdaska ,
R. Clancy ,
V. Jamalabad  and
D. Dalfonzo
C. J. Gasdaska
Affiliation:
AlliedSignal Research and Technology, Morristown, NJ
R. Clancy
Affiliation:
AlliedSignal Research and Technology, Morristown, NJ
V. Jamalabad
Affiliation:
AlliedSignal Research and Technology, Morristown, NJ
D. Dalfonzo
Affiliation:
AlliedSignal Research and Technology, Morristown, NJ
Get access

Abstract

Silicon nitride ceramics have been prepared using the fused deposition (FD) process in a Stratasys 1650 modeler. Two types of silicon nitride have been prepared: GS44 and AS800. AS800 is processed and used at higher temperatures than GS44. The strength of machined surfaces of either type of silicon nitride prepared using FD is comparable to conventionally processed material. Using standard build conditions strengths for as-built and as-sintered surfaces are approximately 50% lower. The additive nature of solid freeform processes also allows multi-material combinations to be deposited which result in enhanced performance. For example, combinations of silicon nitride based materials with different thermal expansion coefficients have been prepared which demonstrate strength increases > 20%. In addition, components containing complicated internal cavities may also be fabricated.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 542: Symposium V – Solid Freeform and Additive Fabrication , 1998 , 79
Copyright
Copyright © Materials Research Society 1999

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Agarwala, M.K. et.al., Am. Ceram. Soc. Bull., 75 [11] pp. 60–65, (1996)Google Scholar
2. Clancy, R. et.al., in Solid Freeform Fabrication Proceedings, edited by Bourell, D.L. et.al. (The University of Texas at Austin, 1997)Google Scholar
3. Cuccio, J. et al. ., in Life Prediction Methodologies and Data for Ceramic Materials, edited by Brinkman, C.R. and Duffy, S.F. (ASTM STP 1201, ASTM Publication Code Number 04-012010-09, 1994), p. 291–308.Google Scholar
4. Jamalabad, V.R. et.al., Proceedings of the 1996 ASME Design for Manufacture Conference, Irvine, CA, August 1996, pp. 18–22.Google Scholar