Hostname: page-component-cd9895bd7-fscjk Total loading time: 0 Render date: 2024-12-27T01:54:21.516Z Has data issue: false hasContentIssue false

Slow Crack Growth Analyses of Oxygen Transport Ceramic Membranes

Published online by Cambridge University Press:  01 February 2011

Nagendra Nagabhushana
Affiliation:
[email protected], University of Alaska Fairbanks, Mechanical Engineering, Department of Mechanical Engineering, University of Alaska Fairbanks, Fairbanks, AK, 99775, United States, (907) 474-6135, (907) 474-6141
Jing Zhang
Affiliation:
[email protected], University of Alaska Fairbanks, Department of Mechanical Engineering, Fairbanks, AK, 99775, United States
Thangamani Nithyanantham
Affiliation:
[email protected], University of Alaska Fairbanks, Department of Mining and Geological Engineering, Fairbanks, AK, 99775, United States
Sukumar Bandopadhyay
Affiliation:
[email protected], University of Alaska Fairbanks, Department of Mining and Geological Engineering, Fairbanks, AK, 99775, United States
Get access

Abstract

Perovskite-type oxides are promising materials with potential use as dense membranes for oxygen separations. We herein report slow crack growth (SCG) studies of La0.2Sr0.8Fe0.8Cr0.2O3-δ (LSFCO) perovskite membranes as Oxygen Transport Membranes (OTM). Two sample batches of perovskite were tested to investigate the effect of temperature, specific chemical environments, and loading rate on flexure strengths, using four-point bending tests. The first batch was examined at room temperature in air. The second batch was soaked in a N2/air atmosphere at 1000°C for 1 hour prior to application of load. Loading rates varied from 0.00005 mm/s to 0.01 mm/s. Flexural strength data indicate that the examined OTM material showed little susceptibility to SCG at room temperature in air. However, the sample is susceptible to SCG in a N2/air environment at 1000°C. Also, the experiments demonstrate flexural-strength rate dependency, with strength increasing with the loading rate. The observed phenomena are explained by the decomposition and microstructural transitions in the perovskite. The results provide important information about OTM mechanical degradation, which is valuable for future OTM design applications.

Type
Research Article
Copyright
Copyright © Materials Research Society 2007

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Huang, K., Tichy, R.S., and Goodenough, J.B., Journal of the American Ceramic Society, 1998. 81(10): p. 2565.Google Scholar
2. Balachandran, U. et al. , American Ceramic Society Bulletin, 1995. 74(1): p. 71.Google Scholar
3. Lee, S. et al. , Desalination, 2006. 193(1-3): p. 236.Google Scholar
4. Chou, Y.-S. et al. , Journal of the American Ceramic Society, 2000. 83(6): p. 14571464.Google Scholar
5. Elshof, J.E.t. and Boeijsma, J., Powder Diffraction, 1996. 11(1): p. 28.Google Scholar
6. Bandopadhyay, S. and Nagabhushana, N., DOE Quarterly Report: Oxygen Transport Ceramic Membranes. 2003.Google Scholar
7. Barsoum, M.W., Fundamentals of ceramics. 1996: McGraw-Hill Companies.Google Scholar
8. Choi, S.R. et al. , NASA Technical Memorandum 107369: 1997.Google Scholar