Article contents
Slag-Based Saltstone Formulations
Published online by Cambridge University Press: 28 February 2011
Abstract
Approximately 400 × 106 liters of low-level alkaline salt solution will be treated at the Savannah River Plant (SRP) Defense Waste Processing Facility (DWPF) prior to disposal in concrete vaults at SRP. Treatment involves removal of Ca+and Sr+2 followed by solidification and stabilization of potential contaminants in saltstone, a hydrated ceramic waste form.
Chromium, technetium, and nitrate releases from saltstone can be significantly reduced by substituting hydraulic blast furnace slag for portland cement in the formulation designs. Slag-based mixes are also compatible with Class F fly ash used in saltstone as a functional extender to control heat of hydration and reduce permeability. (Class F fly ash is locally available at SRP.)
A monolithic waste form is produced by the hydration of the slag and fly ash. Soluble ion release (NO3−) is controlled by the saltstone microstructure (bulk porosity and pore size and connectivity). Chromium and technetium are 103−104 times less leachable from slag mixes than from cement-based waste forms. Results suggest that chemical stabilization rather than physical entrapment, as in the case of nitrate is responsible for this improved leaching. Reduction of Cr+6 and Tc+7 to Cr+3 and Tc+4 by ferrous iron or Mn+2 in the slag and subsequent precipitation of the relatively insoluble phses Cr(OH)3 and TcO2 are proposed as the stabilizing reactions.
- Type
- Research Article
- Information
- Copyright
- Copyright © Materials Research Society 1988
References
- 10
- Cited by